* Sony 1/3.06-Inch 13.13Mp CMOS Digital Image Sensor The Sony imx214 is a 1/3.06-inch CMOS active pixel digital image sensor with an active array size of 4224H x 3200V. It is programmable through an I2C interface. Image data is sent through MIPI CSI-2, through 2 or 4 lanes at a maximum throughput of 1.2Gbps/lane. Required Properties: - compatible: Shall be "sony,imx214". - reg: I2C bus address of the device. Depending on how the sensor is wired, it shall be <0x10> or <0x1a>; - enable-gpios: GPIO descriptor for the enable pin. - vdddo-supply: Chip digital IO regulator (1.8V). - vdda-supply: Chip analog regulator (2.7V). - vddd-supply: Chip digital core regulator (1.12V). - clocks: Reference to the xclk clock. - clock-frequency: Frequency of the xclk clock. Optional Properties: - flash-leds: See ../video-interfaces.txt - lens-focus: See ../video-interfaces.txt The imx214 device node shall contain one 'port' child node with an 'endpoint' subnode. For further reading on port node refer to Documentation/devicetree/bindings/media/video-interfaces.txt. Required Properties on endpoint: - data-lanes: check ../video-interfaces.txt - link-frequencies: check ../video-interfaces.txt - remote-endpoint: check ../video-interfaces.txt Example: camera-sensor@1a { compatible = "sony,imx214"; reg = <0x1a>; vdddo-supply = <&pm8994_lvs1>; vddd-supply = <&camera_vddd_1v12>; vdda-supply = <&pm8994_l17>; lens-focus = <&ad5820>; enable-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>; clocks = <&mmcc CAMSS_MCLK0_CLK>; clock-frequency = <24000000>; port { imx214_ep: endpoint { data-lanes = <1 2 3 4>; link-frequencies = /bits/ 64 <480000000>; remote-endpoint = <&csiphy0_ep>; }; }; };