Device-Tree bindings for ST IRB IP Required properties: - compatible: Should contain "st,comms-irb". - reg: Base physical address of the controller and length of memory mapped region. - interrupts: interrupt-specifier for the sole interrupt generated by the device. The interrupt specifier format depends on the interrupt controller parent. - rx-mode: can be "infrared" or "uhf". This property specifies the L1 protocol used for receiving remote control signals. rx-mode should be present iff the rx pins are wired up. - tx-mode: should be "infrared". This property specifies the L1 protocol used for transmitting remote control signals. tx-mode should be present iff the tx pins are wired up. Optional properties: - pinctrl-names, pinctrl-0: the pincontrol settings to configure muxing properly for IRB pins. - clocks : phandle with clock-specifier pair for IRB. Example node: rc: rc@fe518000 { compatible = "st,comms-irb"; reg = <0xfe518000 0x234>; interrupts = <0 203 0>; rx-mode = "infrared"; };