Device-Tree bindings for Atmel's HLCDC (High LCD Controller) MFD driver Required properties: - compatible: value should be one of the following: "atmel,at91sam9n12-hlcdc" "atmel,at91sam9x5-hlcdc" "atmel,sama5d2-hlcdc" "atmel,sama5d3-hlcdc" "atmel,sama5d4-hlcdc" "microchip,sam9x60-hlcdc" - reg: base address and size of the HLCDC device registers. - clock-names: the name of the 3 clocks requested by the HLCDC device. Should contain "periph_clk", "sys_clk" and "slow_clk". - clocks: should contain the 3 clocks requested by the HLCDC device. - interrupts: should contain the description of the HLCDC interrupt line The HLCDC IP exposes two subdevices: - a PWM chip: see ../pwm/atmel-hlcdc-pwm.txt - a Display Controller: see ../display/atmel/hlcdc-dc.txt Example: hlcdc: hlcdc@f0030000 { compatible = "atmel,sama5d3-hlcdc"; reg = <0xf0030000 0x2000>; clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; clock-names = "periph_clk","sys_clk", "slow_clk"; interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>; hlcdc-display-controller { compatible = "atmel,hlcdc-display-controller"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>; #address-cells = <1>; #size-cells = <0>; port@0 { #address-cells = <1>; #size-cells = <0>; reg = <0>; hlcdc_panel_output: endpoint@0 { reg = <0>; remote-endpoint = <&panel_input>; }; }; }; hlcdc_pwm: hlcdc-pwm { compatible = "atmel,hlcdc-pwm"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lcd_pwm>; #pwm-cells = <3>; }; };