* ROHM BD9571MWV Power Management Integrated Circuit (PMIC) bindings Required properties: - compatible : Should be "rohm,bd9571mwv". - reg : I2C slave address. - interrupt-parent : Phandle to the parent interrupt controller. - interrupts : The interrupt line the device is connected to. - interrupt-controller : Marks the device node as an interrupt controller. - #interrupt-cells : The number of cells to describe an IRQ, should be 2. The first cell is the IRQ number. The second cell is the flags, encoded as trigger masks from ../interrupt-controller/interrupts.txt. - gpio-controller : Marks the device node as a GPIO Controller. - #gpio-cells : Should be two. The first cell is the pin number and the second cell is used to specify flags. See ../gpio/gpio.txt for more information. - regulators: : List of child nodes that specify the regulator initialization data. Child nodes must be named after their hardware counterparts: - vd09 - vd18 - vd25 - vd33 - dvfs Each child node is defined using the standard binding for regulators. Example: pmic: pmic@30 { compatible = "rohm,bd9571mwv"; reg = <0x30>; interrupt-parent = <&gpio2>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <2>; gpio-controller; #gpio-cells = <2>; regulators { dvfs: dvfs { regulator-name = "dvfs"; regulator-min-microvolt = <750000>; regulator-max-microvolt = <1030000>; regulator-boot-on; regulator-always-on; }; }; };