Motorola CPCAP PMIC device tree binding Required properties: - compatible : One or both of "motorola,cpcap" or "ste,6556002" - reg : SPI chip select - interrupt-parent : The parent interrupt controller - interrupts : The interrupt line the device is connected to - interrupt-controller : Marks the device node as an interrupt controller - #interrupt-cells : The number of cells to describe an IRQ, should be 2 - #address-cells : Child device offset number of cells, should be 1 - #size-cells : Child device size number of cells, should be 0 - spi-max-frequency : Typically set to 3000000 - spi-cs-high : SPI chip select direction Example: &mcspi1 { cpcap: pmic@0 { compatible = "motorola,cpcap", "ste,6556002"; reg = <0>; /* cs0 */ interrupt-parent = <&gpio1>; interrupts = <7 IRQ_TYPE_EDGE_RISING>; interrupt-controller; #interrupt-cells = <2>; #address-cells = <1>; #size-cells = <0>; spi-max-frequency = <3000000>; spi-cs-high; }; };