# SPDX-License-Identifier: GPL-2.0-only %YAML 1.2 --- $id: http://devicetree.org/schemas/mfd/samsung,s2mps11.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Samsung S2MPS11/13/14/15 and S2MPU02 Power Management IC maintainers: - Krzysztof Kozlowski description: | This is a part of device tree bindings for S2M and S5M family of Power Management IC (PMIC). The Samsung S2MPS11/13/14/15 and S2MPU02 is a family of Power Management IC which include voltage and current regulators, RTC, clock outputs and other sub-blocks. properties: compatible: enum: - samsung,s2mps11-pmic - samsung,s2mps13-pmic - samsung,s2mps14-pmic - samsung,s2mps15-pmic - samsung,s2mpu02-pmic clocks: $ref: ../clock/samsung,s2mps11.yaml description: Child node describing clock provider. interrupts: maxItems: 1 reg: maxItems: 1 regulators: type: object description: List of child nodes that specify the regulators. samsung,s2mps11-acokb-ground: description: | Indicates that ACOKB pin of S2MPS11 PMIC is connected to the ground so the PMIC must manually set PWRHOLD bit in CTRL1 register to turn off the power. Usually the ACOKB is pulled up to VBATT so when PWRHOLD pin goes low, the rising ACOKB will trigger power off. type: boolean samsung,s2mps11-wrstbi-ground: description: | Indicates that WRSTBI pin of PMIC is pulled down. When the system is suspended it will always go down thus triggerring unwanted buck warm reset (setting buck voltages to default values). type: boolean wakeup-source: true required: - compatible - reg - regulators additionalProperties: false allOf: - if: properties: compatible: contains: const: samsung,s2mps11-pmic then: properties: regulators: $ref: ../regulator/samsung,s2mps11.yaml samsung,s2mps11-wrstbi-ground: false - if: properties: compatible: contains: const: samsung,s2mps13-pmic then: properties: regulators: $ref: ../regulator/samsung,s2mps13.yaml samsung,s2mps11-acokb-ground: false - if: properties: compatible: contains: const: samsung,s2mps14-pmic then: properties: regulators: $ref: ../regulator/samsung,s2mps14.yaml samsung,s2mps11-acokb-ground: false samsung,s2mps11-wrstbi-ground: false - if: properties: compatible: contains: const: samsung,s2mps15-pmic then: properties: regulators: $ref: ../regulator/samsung,s2mps15.yaml samsung,s2mps11-acokb-ground: false samsung,s2mps11-wrstbi-ground: false - if: properties: compatible: contains: const: samsung,s2mpu02-pmic then: properties: regulators: $ref: ../regulator/samsung,s2mpu02.yaml samsung,s2mps11-acokb-ground: false samsung,s2mps11-wrstbi-ground: false examples: - | #include i2c { #address-cells = <1>; #size-cells = <0>; pmic@66 { compatible = "samsung,s2mps11-pmic"; reg = <0x66>; interrupt-parent = <&gpx0>; interrupts = <4 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&s2mps11_irq>; samsung,s2mps11-acokb-ground; wakeup-source; clocks { compatible = "samsung,s2mps11-clk"; #clock-cells = <1>; clock-output-names = "s2mps11_ap", "s2mps11_cp", "s2mps11_bt"; }; regulators { LDO1 { regulator-name = "vdd_ldo1"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; }; LDO4 { regulator-name = "vdd_adc"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-state-mem { regulator-off-in-suspend; }; }; // .... BUCK1 { regulator-name = "vdd_mif"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1300000>; regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; BUCK2 { regulator-name = "vdd_arm"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1500000>; regulator-always-on; regulator-boot-on; regulator-coupled-with = <&buck3_reg>; regulator-coupled-max-spread = <300000>; regulator-state-mem { regulator-off-in-suspend; }; }; BUCK3 { regulator-name = "vdd_int"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1400000>; regulator-always-on; regulator-boot-on; regulator-coupled-with = <&buck2_reg>; regulator-coupled-max-spread = <300000>; regulator-state-mem { regulator-off-in-suspend; }; }; // ... }; }; }; - | #include i2c { #address-cells = <1>; #size-cells = <0>; pmic@66 { compatible = "samsung,s2mps14-pmic"; reg = <0x66>; interrupt-parent = <&gpx0>; interrupts = <7 IRQ_TYPE_LEVEL_LOW>; wakeup-source; clocks { compatible = "samsung,s2mps14-clk"; #clock-cells = <1>; clock-output-names = "s2mps14_ap", "unused", "s2mps14_bt"; }; regulators { LDO1 { regulator-name = "VLDO1_1.0V"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; regulator-state-mem { regulator-on-in-suspend; }; }; // ... BUCK1 { regulator-name = "VBUCK1_1.0V"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1000000>; regulator-always-on; regulator-state-mem { regulator-off-in-suspend; }; }; // ... }; }; };