* Denali NAND controller Required properties: - compatible : should be "denali,denali-nand-dt" - reg : should contain registers location and length for data and reg. - reg-names: Should contain the reg names "nand_data" and "denali_reg" - interrupts : The interrupt number. - dm-mask : DMA bit mask The device tree may optionally contain sub-nodes describing partitions of the address space. See partition.txt for more detail. Examples: nand: nand@ff900000 { #address-cells = <1>; #size-cells = <1>; compatible = "denali,denali-nand-dt"; reg = <0xff900000 0x100000>, <0xffb80000 0x10000>; reg-names = "nand_data", "denali_reg"; interrupts = <0 144 4>; dma-mask = <0xffffffff>; };