* Broadcom BCM7xxx Ethernet Systemport Controller (SYSTEMPORT) Required properties: - compatible: should be one of "brcm,systemport-v1.00" or "brcm,systemport" - reg: address and length of the register set for the device. - interrupts: interrupts for the device, first cell must be for the rx interrupts, and the second cell should be for the transmit queues. An optional third interrupt cell for Wake-on-LAN can be specified - local-mac-address: Ethernet MAC address (48 bits) of this adapter - phy-mode: Should be a string describing the PHY interface to the Ethernet switch/PHY, see Documentation/devicetree/bindings/net/ethernet.txt - fixed-link: see Documentation/devicetree/bindings/net/fixed-link.txt for the property specific details Optional properties: - systemport,num-tier2-arb: number of tier 2 arbiters, an integer - systemport,num-tier1-arb: number of tier 1 arbiters, an integer - systemport,num-txq: number of HW transmit queues, an integer - systemport,num-rxq: number of HW receive queues, an integer Example: ethernet@f04a0000 { compatible = "brcm,systemport-v1.00"; reg = <0xf04a0000 0x4650>; local-mac-address = [ 00 11 22 33 44 55 ]; fixed-link = <0 1 1000 0 0>; phy-mode = "gmii"; interrupts = <0x0 0x16 0x0>, <0x0 0x17 0x0>; };