Davicom DM9000 Fast Ethernet controller Required properties: - compatible = "davicom,dm9000"; - reg : physical addresses and sizes of registers, must contain 2 entries: first entry : address register, second entry : data register. - interrupts : interrupt specifier specific to interrupt controller Optional properties: - davicom,no-eeprom : Configuration EEPROM is not available - davicom,ext-phy : Use external PHY - reset-gpios : phandle of gpio that will be used to reset chip during probe - vcc-supply : phandle of regulator that will be used to enable power to chip Example: ethernet@18000000 { compatible = "davicom,dm9000"; reg = <0x18000000 0x2 0x18000004 0x2>; interrupt-parent = <&gpn>; interrupts = <7 4>; local-mac-address = [00 00 de ad be ef]; davicom,no-eeprom; reset-gpios = <&gpf 12 GPIO_ACTIVE_LOW>; vcc-supply = <ð0_power>; };