* NXP LPC32xx SoC Ethernet Controller Required properties: - compatible: Should be "nxp,lpc-eth" - reg: Address and length of the register set for the device - interrupts: Should contain ethernet controller interrupt Optional properties: - phy-mode: See ethernet.txt file in the same directory. If the property is absent, "rmii" is assumed. - use-iram: Use LPC32xx internal SRAM (IRAM) for DMA buffering Optional subnodes: - mdio : specifies the mdio bus, used as a container for phy nodes according to phy.txt in the same directory Example: mac: ethernet@31060000 { compatible = "nxp,lpc-eth"; reg = <0x31060000 0x1000>; interrupt-parent = <&mic>; interrupts = <29 0>; phy-mode = "rmii"; use-iram; };