* Marvell PXA168 Ethernet Controller Required properties: - compatible: should be "marvell,pxa168-eth". - reg: address and length of the register set for the device. - interrupts: interrupt for the device. - clocks: pointer to the clock for the device. Optional properties: - port-id: Ethernet port number. Should be '0','1' or '2'. - #address-cells: must be 1 when using sub-nodes. - #size-cells: must be 0 when using sub-nodes. - phy-handle: see ethernet.txt file in the same directory. The MAC address will be determined using the optional properties defined in ethernet.txt. Sub-nodes: Each PHY can be represented as a sub-node. This is not mandatory. Sub-nodes required properties: - reg: the MDIO address of the PHY. Example: eth0: ethernet@f7b90000 { compatible = "marvell,pxa168-eth"; reg = <0xf7b90000 0x10000>; clocks = <&chip CLKID_GETH0>; interrupts = ; #address-cells = <1>; #size-cells = <0>; phy-handle = <ðphy0>; ethphy0: ethernet-phy@0 { reg = <0>; }; };