# SPDX-License-Identifier: GPL-2.0 %YAML 1.2 --- $id: http://devicetree.org/schemas/net/mdio-mux-mmioreg.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Properties for an MDIO bus multiplexer controlled by a memory-mapped device maintainers: - Andrew Lunn description: |+ This is a special case of a MDIO bus multiplexer. A memory-mapped device, like an FPGA, is used to control which child bus is connected. The mdio-mux node must be a child of the memory-mapped device. The driver currently only supports devices with 8, 16 or 32-bit registers. allOf: - $ref: /schemas/net/mdio-mux.yaml# properties: compatible: items: - const: mdio-mux-mmioreg - const: mdio-mux reg: description: Contains the offset of the register that controls the bus multiplexer. The size field in the 'reg' property is the size of register, and must therefore be 1, 2, or 4. maxItems: 1 mux-mask: $ref: /schemas/types.yaml#/definitions/uint32 description: Contains an eight-bit mask that specifies which bits in the register control the actual bus multiplexer. The 'reg' property of each child mdio-mux node must be constrained by this mask. required: - compatible - reg - mux-mask unevaluatedProperties: false examples: - | mdio-mux@9 { compatible = "mdio-mux-mmioreg", "mdio-mux"; mdio-parent-bus = <&xmdio0>; #address-cells = <1>; #size-cells = <0>; reg = <9 1>; // BRDCFG1 mux-mask = <0x6>; // EMI2 mdio@0 { // Slot 1 XAUI (FM2) reg = <0>; #address-cells = <1>; #size-cells = <0>; phy_xgmii_slot1: ethernet-phy@4 { compatible = "ethernet-phy-ieee802.3-c45"; reg = <4>; }; }; mdio@2 { // Slot 2 XAUI (FM1) reg = <2>; #address-cells = <1>; #size-cells = <0>; ethernet-phy@4 { compatible = "ethernet-phy-ieee802.3-c45"; reg = <4>; }; }; }; ...