# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/net/mediatek,star-emac.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: MediaTek STAR Ethernet MAC Controller maintainers: - Bartosz Golaszewski description: This Ethernet MAC is used on the MT8* family of SoCs from MediaTek. It's compliant with 802.3 standards and supports half- and full-duplex modes with flow-control as well as CRC offloading and VLAN tags. allOf: - $ref: "ethernet-controller.yaml#" properties: compatible: enum: - mediatek,mt8516-eth - mediatek,mt8518-eth - mediatek,mt8175-eth reg: maxItems: 1 interrupts: maxItems: 1 clocks: minItems: 3 maxItems: 3 clock-names: additionalItems: false items: - const: core - const: reg - const: trans mediatek,pericfg: $ref: /schemas/types.yaml#definitions/phandle description: Phandle to the device containing the PERICFG register range. This is used to control the MII mode. mdio: type: object description: Creates and registers an MDIO bus. required: - compatible - reg - interrupts - clocks - clock-names - mediatek,pericfg - phy-handle unevaluatedProperties: false examples: - | #include #include ethernet: ethernet@11180000 { compatible = "mediatek,mt8516-eth"; reg = <0x11180000 0x1000>; mediatek,pericfg = <&pericfg>; interrupts = ; clocks = <&topckgen CLK_TOP_RG_ETH>, <&topckgen CLK_TOP_66M_ETH>, <&topckgen CLK_TOP_133M_ETH>; clock-names = "core", "reg", "trans"; phy-handle = <ð_phy>; phy-mode = "rmii"; mdio { #address-cells = <1>; #size-cells = <0>; eth_phy: ethernet-phy@0 { reg = <0>; }; }; };