# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/microchip,lan966x-switch.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Microchip Lan966x Ethernet switch controller

maintainers:
  - Horatiu Vultur <horatiu.vultur@microchip.com>

description: |
  The lan966x switch is a multi-port Gigabit AVB/TSN Ethernet Switch with
  two integrated 10/100/1000Base-T PHYs. In addition to the integrated PHYs,
  it supports up to 2RGMII/RMII, up to 3BASE-X/SERDES/2.5GBASE-X and up to
  2 Quad-SGMII/Quad-USGMII interfaces.

properties:
  $nodename:
    pattern: "^switch@[0-9a-f]+$"

  compatible:
    const: microchip,lan966x-switch

  reg:
    items:
      - description: cpu target
      - description: general control block target

  reg-names:
    items:
      - const: cpu
      - const: gcb

  interrupts:
    minItems: 1
    items:
      - description: register based extraction
      - description: frame dma based extraction
      - description: analyzer interrupt
      - description: ptp interrupt
      - description: ptp external interrupt

  interrupt-names:
    minItems: 1
    items:
      - const: xtr
      - const: fdma
      - const: ana
      - const: ptp
      - const: ptp-ext

  resets:
    items:
      - description: Reset controller used for switch core reset (soft reset)

  reset-names:
    items:
      - const: switch

  ethernet-ports:
    type: object

    properties:
      '#address-cells':
        const: 1
      '#size-cells':
        const: 0

    additionalProperties: false

    patternProperties:
      "^port@[0-9a-f]+$":
        type: object

        $ref: /schemas/net/ethernet-controller.yaml#
        unevaluatedProperties: false

        properties:
          '#address-cells':
            const: 1
          '#size-cells':
            const: 0

          reg:
            description:
              Switch port number

          phys:
            description:
              Phandle of a Ethernet SerDes PHY

          phy-mode:
            description:
              This specifies the interface used by the Ethernet SerDes towards
              the PHY or SFP.
            enum:
              - gmii
              - sgmii
              - qsgmii
              - 1000base-x
              - 2500base-x

          phy-handle:
            description:
              Phandle of a Ethernet PHY.

          sfp:
            description:
              Phandle of an SFP.

          managed: true

        required:
          - reg
          - phys
          - phy-mode

        oneOf:
          - required:
              - phy-handle
          - required:
              - sfp
              - managed

required:
  - compatible
  - reg
  - reg-names
  - interrupts
  - interrupt-names
  - resets
  - reset-names
  - ethernet-ports

additionalProperties: false

examples:
  - |
    #include <dt-bindings/interrupt-controller/arm-gic.h>
    switch: switch@e0000000 {
      compatible = "microchip,lan966x-switch";
      reg =  <0xe0000000 0x0100000>,
             <0xe2000000 0x0800000>;
      reg-names = "cpu", "gcb";
      interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
      interrupt-names = "xtr";
      resets = <&switch_reset 0>;
      reset-names = "switch";
      ethernet-ports {
        #address-cells = <1>;
        #size-cells = <0>;

        port0: port@0 {
          reg = <0>;
          phy-handle = <&phy0>;
          phys = <&serdes 0 0>;
          phy-mode = "gmii";
        };

        port1: port@1 {
          reg = <1>;
          sfp = <&sfp_eth1>;
          managed = "in-band-status";
          phys = <&serdes 2 4>;
          phy-mode = "sgmii";
        };
      };
    };

...