* NI XGE Ethernet controller Required properties: - compatible: Should be "ni,xge-enet-2.00" - reg: Address and length of the register set for the device - interrupts: Should contain tx and rx interrupt - interrupt-names: Should be "rx" and "tx" - phy-mode: See ethernet.txt file in the same directory. - phy-handle: See ethernet.txt file in the same directory. - nvmem-cells: Phandle of nvmem cell containing the MAC address - nvmem-cell-names: Should be "address" Examples (10G generic PHY): nixge0: ethernet@40000000 { compatible = "ni,xge-enet-2.00"; reg = <0x40000000 0x6000>; nvmem-cells = <ð1_addr>; nvmem-cell-names = "address"; interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>, <0 30 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "rx", "tx"; interrupt-parent = <&intc>; phy-mode = "xgmii"; phy-handle = <ðernet_phy1>; ethernet_phy1: ethernet-phy@4 { compatible = "ethernet-phy-ieee802.3-c45"; reg = <4>; }; };