* Oxford Semiconductor OXNAS DWMAC Ethernet controller The device inherits all the properties of the dwmac/stmmac devices described in the file stmmac.txt in the current directory with the following changes. Required properties on all platforms: - compatible: For the OX820 SoC, it should be : - "oxsemi,ox820-dwmac" to select glue - "snps,dwmac-3.512" to select IP version. - clocks: Should contain phandles to the following clocks - clock-names: Should contain the following: - "stmmaceth" for the host clock - see stmmac.txt - "gmac" for the peripheral gate clock - oxsemi,sys-ctrl: a phandle to the system controller syscon node Example : etha: ethernet@40400000 { compatible = "oxsemi,ox820-dwmac", "snps,dwmac-3.512"; reg = <0x40400000 0x2000>; interrupts = , ; interrupt-names = "macirq", "eth_wake_irq"; mac-address = [000000000000]; /* Filled in by U-Boot */ phy-mode = "rgmii"; clocks = <&stdclk CLK_820_ETHA>, <&gmacclk>; clock-names = "gmac", "stmmaceth"; resets = <&reset RESET_MAC>; /* Regmap for sys registers */ oxsemi,sys-ctrl = <&sys>; };