Broadcom BCM43xx Fullmac wireless SDIO devices This node provides properties for controlling the Broadcom wireless device. The node is expected to be specified as a child node to the SDIO controller that connects the device to the system. Required properties: - compatible : Should be "brcm,bcm4329-fmac". Optional properties: - brcm,drive-strength : drive strength used for SDIO pins on device in mA (default = 6). - interrupts : specifies attributes for the out-of-band interrupt (host-wake). When not specified the device will use in-band SDIO interrupts. - interrupt-names : name of the out-of-band interrupt, which must be set to "host-wake". Example: mmc3: mmc@1c12000 { #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&mmc3_pins_a>; vmmc-supply = <®_vmmc3>; bus-width = <4>; non-removable; brcmf: wifi@1 { reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&pio>; interrupts = <10 8>; /* PH10 / EINT10 */ interrupt-names = "host-wake"; }; };