* Altera PCIe controller Required properties: - compatible : should contain "altr,pcie-root-port-1.0" - reg: a list of physical base address and length for TXS and CRA. - reg-names: must include the following entries: "Txs": TX slave port region "Cra": Control register access region - interrupt-parent: interrupt source phandle. - interrupts: specifies the interrupt source of the parent interrupt controller. The format of the interrupt specifier depends on the parent interrupt controller. - device_type: must be "pci" - #address-cells: set to <3> - #size-cells: set to <2> - #interrupt-cells: set to <1> - ranges: describes the translation of addresses for root ports and standard PCI regions. - interrupt-map-mask and interrupt-map: standard PCI properties to define the mapping of the PCIe interface to interrupt numbers. Optional properties: - msi-parent: Link to the hardware entity that serves as the MSI controller for this PCIe controller. - bus-range: PCI bus numbers covered Example pcie_0: pcie@0xc00000000 { compatible = "altr,pcie-root-port-1.0"; reg = <0xc0000000 0x20000000>, <0xff220000 0x00004000>; reg-names = "Txs", "Cra"; interrupt-parent = <&hps_0_arm_gic_0>; interrupts = <0 40 4>; interrupt-controller; #interrupt-cells = <1>; bus-range = <0x0 0xFF>; device_type = "pci"; msi-parent = <&msi_to_gic_gen_0>; #address-cells = <3>; #size-cells = <2>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0 0 0 1 &pcie_0 1>, <0 0 0 2 &pcie_0 2>, <0 0 0 3 &pcie_0 3>, <0 0 0 4 &pcie_0 4>; ranges = <0x82000000 0x00000000 0x00000000 0xc0000000 0x00000000 0x10000000 0x82000000 0x00000000 0x10000000 0xd0000000 0x00000000 0x10000000>; };