V3 Semiconductor V360 EPC PCI bridge This bridge is found in the ARM Integrator/AP (Application Platform) Required properties: - compatible: should be one of: "v3,v360epc-pci" "arm,integrator-ap-pci", "v3,v360epc-pci" - reg: should contain two register areas: first the base address of the V3 host bridge controller, 64KB second the configuration area register space, 16MB - interrupts: should contain a reference to the V3 error interrupt as routed on the system. - bus-range: see pci.txt - ranges: this follows the standard PCI bindings in the IEEE Std 1275-1994 (see pci.txt) with the following restriction: - The non-prefetchable and prefetchable memory windows must each be exactly 256MB (0x10000000) in size. - The prefetchable memory window must be immediately adjacent to the non-prefetcable memory window - dma-ranges: three ranges for the inbound memory region. The ranges must be aligned to a 1MB boundary, and may be 1MB, 2MB, 4MB, 8MB, 16MB, 32MB, 64MB, 128MB, 256MB, 512MB, 1GB or 2GB in size. The memory should be marked as pre-fetchable. Two ranges are supported by the hardware. Integrator-specific required properties: - syscon: should contain a link to the syscon device node, since on the Integrator, some registers in the syscon are required to operate the V3 host bridge. Example: pci: pciv3@62000000 { compatible = "arm,integrator-ap-pci", "v3,v360epc-pci"; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; reg = <0x62000000 0x10000>, <0x61000000 0x01000000>; interrupt-parent = <&pic>; interrupts = <17>; /* Bus error IRQ */ clocks = <&pciclk>; bus-range = <0x00 0xff>; ranges = 0x01000000 0 0x00000000 /* I/O space @00000000 */ 0x60000000 0 0x01000000 /* 16 MiB @ LB 60000000 */ 0x02000000 0 0x40000000 /* non-prefectable memory @40000000 */ 0x40000000 0 0x10000000 /* 256 MiB @ LB 40000000 1:1 */ 0x42000000 0 0x50000000 /* prefetchable memory @50000000 */ 0x50000000 0 0x10000000>; /* 256 MiB @ LB 50000000 1:1 */ dma-ranges = <0x02000000 0 0x20000000 /* EBI memory space */ 0x20000000 0 0x20000000 /* 512 MB @ LB 20000000 1:1 */ 0x02000000 0 0x80000000 /* Core module alias memory */ 0x80000000 0 0x40000000>; /* 1GB @ LB 80000000 */ interrupt-map-mask = <0xf800 0 0 0x7>; interrupt-map = < /* IDSEL 9 */ 0x4800 0 0 1 &pic 13 /* INT A on slot 9 is irq 13 */ 0x4800 0 0 2 &pic 14 /* INT B on slot 9 is irq 14 */ 0x4800 0 0 3 &pic 15 /* INT C on slot 9 is irq 15 */ 0x4800 0 0 4 &pic 16 /* INT D on slot 9 is irq 16 */ /* IDSEL 10 */ 0x5000 0 0 1 &pic 14 /* INT A on slot 10 is irq 14 */ 0x5000 0 0 2 &pic 15 /* INT B on slot 10 is irq 15 */ 0x5000 0 0 3 &pic 16 /* INT C on slot 10 is irq 16 */ 0x5000 0 0 4 &pic 13 /* INT D on slot 10 is irq 13 */ /* IDSEL 11 */ 0x5800 0 0 1 &pic 15 /* INT A on slot 11 is irq 15 */ 0x5800 0 0 2 &pic 16 /* INT B on slot 11 is irq 16 */ 0x5800 0 0 3 &pic 13 /* INT C on slot 11 is irq 13 */ 0x5800 0 0 4 &pic 14 /* INT D on slot 11 is irq 14 */ /* IDSEL 12 */ 0x6000 0 0 1 &pic 16 /* INT A on slot 12 is irq 16 */ 0x6000 0 0 2 &pic 13 /* INT B on slot 12 is irq 13 */ 0x6000 0 0 3 &pic 14 /* INT C on slot 12 is irq 14 */ 0x6000 0 0 4 &pic 15 /* INT D on slot 12 is irq 15 */ >; };