* Amlogic Meson GXL and GXM USB3 PHY and OTG detection binding Required properties: - compatible: Should be "amlogic,meson-gxl-usb3-phy" - #phys-cells: must be 0 (see phy-bindings.txt in this directory) - reg: The base address and length of the registers - interrupts: the interrupt specifier for the OTG detection - clocks: phandles to the clocks for - the USB3 PHY - and peripheral mode/OTG detection - clock-names: must contain "phy" and "peripheral" - resets: phandle to the reset lines for: - the USB3 PHY and - peripheral mode/OTG detection - reset-names: must contain "phy" and "peripheral" Optional properties: - phy-supply: see phy-bindings.txt in this directory Example: usb3_phy0: phy@78080 { compatible = "amlogic,meson-gxl-usb3-phy"; #phy-cells = <0>; reg = <0x0 0x78080 0x0 0x20>; interrupts = ; clocks = <&clkc CLKID_USB_OTG>, <&clkc_AO CLKID_AO_CEC_32K>; clock-names = "phy", "peripheral"; resets = <&reset RESET_USB_OTG>, <&reset RESET_USB_OTG>; reset-names = "phy", "peripheral"; };