* Marvell MVEBU SATA PHY Power control for the SATA phy found on Marvell MVEBU SoCs. This document extends the binding described in phy-bindings.txt Required properties : - reg : Offset and length of the register set for the SATA device - compatible : Should be "marvell,mvebu-sata-phy" - clocks : phandle of clock and specifier that supplies the device - clock-names : Should be "sata" Example: sata-phy@84000 { compatible = "marvell,mvebu-sata-phy"; reg = <0x84000 0x0334>; clocks = <&gate_clk 15>; clock-names = "sata"; #phy-cells = <0>; }; Armada 375 USB cluster ---------------------- Armada 375 comes with an USB2 host and device controller and an USB3 controller. The USB cluster control register allows to manage common features of both USB controllers. Required properties: - compatible: "marvell,armada-375-usb-cluster" - reg: Should contain usb cluster register location and length. - #phy-cells : from the generic phy bindings, must be 1. Possible values are 1 (USB2), 2 (USB3). Example: usbcluster: usb-cluster@18400 { compatible = "marvell,armada-375-usb-cluster"; reg = <0x18400 0x4>; #phy-cells = <1> };