Marvell 88PM800 regulator Required properties: - compatible: "marvell,88pm800" - reg: I2C slave address - regulators: A node that houses a sub-node for each regulator within the device. Each sub-node is identified using the node's name (or the deprecated regulator-compatible property if present), with valid values listed below. The content of each sub-node is defined by the standard binding for regulators; see regulator.txt. The valid names for regulators are: buck1, buck2, buck3, buck4, buck5, ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7, ldo8, ldo9, ldo10, ldo11, ldo12, ldo13, ldo14, ldo15, ldo16, ldo17, ldo18, ldo19 Example: pmic: 88pm800@31 { compatible = "marvell,88pm800"; reg = <0x31>; regulators { buck1 { regulator-min-microvolt = <600000>; regulator-max-microvolt = <3950000>; regulator-boot-on; regulator-always-on; }; ldo1 { regulator-min-microvolt = <600000>; regulator-max-microvolt = <15000000>; regulator-boot-on; regulator-always-on; }; ... }; };