Anatop Voltage regulators Required properties: - compatible: Must be "fsl,anatop-regulator" - regulator-name: A string used as a descriptive name for regulator outputs - anatop-reg-offset: Anatop MFD register offset - anatop-vol-bit-shift: Bit shift for the register - anatop-vol-bit-width: Number of bits used in the register - anatop-min-bit-val: Minimum value of this register - anatop-min-voltage: Minimum voltage of this regulator - anatop-max-voltage: Maximum voltage of this regulator Optional properties: - anatop-delay-reg-offset: Anatop MFD step time register offset - anatop-delay-bit-shift: Bit shift for the step time register - anatop-delay-bit-width: Number of bits used in the step time register - vin-supply: The supply for this regulator - anatop-enable-bit: Regulator enable bit offset Any property defined as part of the core regulator binding, defined in regulator.txt, can also be used. Example: regulator-vddpu { compatible = "fsl,anatop-regulator"; regulator-name = "vddpu"; regulator-min-microvolt = <725000>; regulator-max-microvolt = <1300000>; regulator-always-on; anatop-reg-offset = <0x140>; anatop-vol-bit-shift = <9>; anatop-vol-bit-width = <5>; anatop-delay-reg-offset = <0x170>; anatop-delay-bit-shift = <24>; anatop-delay-bit-width = <2>; anatop-min-bit-val = <1>; anatop-min-voltage = <725000>; anatop-max-voltage = <1300000>; };