* Dialog Semiconductor DA9211/DA9212/DA9213/DA9214/DA9215 Voltage Regulator Required properties: - compatible: "dlg,da9211" or "dlg,da9212" or "dlg,da9213" or "dlg,da9214" or "dlg,da9215" - reg: I2C slave address, usually 0x68. - interrupts: the interrupt outputs of the controller - regulators: A node that houses a sub-node for each regulator within the device. Each sub-node is identified using the node's name, with valid values listed below. The content of each sub-node is defined by the standard binding for regulators; see regulator.txt. BUCKA and BUCKB. Optional properties: - enable-gpios: platform gpio for control of BUCKA/BUCKB. - Any optional property defined in regulator.txt Example 1) DA9211 pmic: da9211@68 { compatible = "dlg,da9211"; reg = <0x68>; interrupts = <3 27>; regulators { BUCKA { regulator-name = "VBUCKA"; regulator-min-microvolt = < 300000>; regulator-max-microvolt = <1570000>; regulator-min-microamp = <2000000>; regulator-max-microamp = <5000000>; enable-gpios = <&gpio 27 0>; }; }; }; Example 2) DA9212 pmic: da9212@68 { compatible = "dlg,da9212"; reg = <0x68>; interrupts = <3 27>; regulators { BUCKA { regulator-name = "VBUCKA"; regulator-min-microvolt = < 300000>; regulator-max-microvolt = <1570000>; regulator-min-microamp = <2000000>; regulator-max-microamp = <5000000>; enable-gpios = <&gpio 27 0>; }; BUCKB { regulator-name = "VBUCKB"; regulator-min-microvolt = < 300000>; regulator-max-microvolt = <1570000>; regulator-min-microamp = <2000000>; regulator-max-microamp = <5000000>; enable-gpios = <&gpio 17 0>; }; }; }; Example 3) DA9213 pmic: da9213@68 { compatible = "dlg,da9213"; reg = <0x68>; interrupts = <3 27>; regulators { BUCKA { regulator-name = "VBUCKA"; regulator-min-microvolt = < 300000>; regulator-max-microvolt = <1570000>; regulator-min-microamp = <3000000>; regulator-max-microamp = <6000000>; enable-gpios = <&gpio 27 0>; }; }; }; Example 4) DA9214 pmic: da9214@68 { compatible = "dlg,da9214"; reg = <0x68>; interrupts = <3 27>; regulators { BUCKA { regulator-name = "VBUCKA"; regulator-min-microvolt = < 300000>; regulator-max-microvolt = <1570000>; regulator-min-microamp = <3000000>; regulator-max-microamp = <6000000>; enable-gpios = <&gpio 27 0>; }; BUCKB { regulator-name = "VBUCKB"; regulator-min-microvolt = < 300000>; regulator-max-microvolt = <1570000>; regulator-min-microamp = <3000000>; regulator-max-microamp = <6000000>; enable-gpios = <&gpio 17 0>; }; }; }; Example 5) DA9215 pmic: da9215@68 { compatible = "dlg,da9215"; reg = <0x68>; interrupts = <3 27>; regulators { BUCKA { regulator-name = "VBUCKA"; regulator-min-microvolt = < 300000>; regulator-max-microvolt = <1570000>; regulator-min-microamp = <4000000>; regulator-max-microamp = <7000000>; enable-gpios = <&gpio 27 0>; }; BUCKB { regulator-name = "VBUCKB"; regulator-min-microvolt = < 300000>; regulator-max-microvolt = <1570000>; regulator-min-microamp = <4000000>; regulator-max-microamp = <7000000>; enable-gpios = <&gpio 17 0>; }; }; };