* HiSilicon SAS controller The HiSilicon SAS controller supports SAS/SATA. Main node required properties: - compatible : value should be as follows: (a) "hisilicon,hip05-sas-v1" for v1 hw in hip05 chipset - sas-addr : array of 8 bytes for host SAS address - reg : Address and length of the SAS register - hisilicon,sas-syscon: phandle of syscon used for sas control - ctrl-reset-reg : offset to controller reset register in ctrl reg - ctrl-reset-sts-reg : offset to controller reset status register in ctrl reg - ctrl-clock-ena-reg : offset to controller clock enable register in ctrl reg - queue-count : number of delivery and completion queues in the controller - phy-count : number of phys accessible by the controller - interrupts : Interrupts for phys, completion queues, and fatal sources; the interrupts are ordered in 3 groups, as follows: - Phy interrupts - Completion queue interrupts - Fatal interrupts Phy interrupts : Each phy has 3 interrupt sources: - broadcast - phyup - abnormal The phy interrupts are ordered into groups of 3 per phy (broadcast, phyup, and abnormal) in increasing order. Completion queue interrupts : each completion queue has 1 interrupt source. The interrupts are ordered in increasing order. Fatal interrupts : the fatal interrupts are ordered as follows: - ECC - AXI bus Example: sas0: sas@c1000000 { compatible = "hisilicon,hip05-sas-v1"; sas-addr = [50 01 88 20 16 00 00 0a]; reg = <0x0 0xc1000000 0x0 0x10000>; hisilicon,sas-syscon = <&pcie_sas>; ctrl-reset-reg = <0xa60>; ctrl-reset-sts-reg = <0x5a30>; ctrl-clock-ena-reg = <0x338>; queue-count = <32>; phy-count = <8>; dma-coherent; interrupt-parent = <&mbigen_dsa>; interrupts = <259 4>,<263 4>,<264 4>,/* phy0 */ <269 4>,<273 4>,<274 4>,/* phy1 */ <279 4>,<283 4>,<284 4>,/* phy2 */ <289 4>,<293 4>,<294 4>,/* phy3 */ <299 4>,<303 4>,<304 4>,/* phy4 */ <309 4>,<313 4>,<314 4>,/* phy5 */ <319 4>,<323 4>,<324 4>,/* phy6 */ <329 4>,<333 4>,<334 4>,/* phy7 */ <336 1>,<337 1>,<338 1>,/* cq0-2 */ <339 1>,<340 1>,<341 1>,/* cq3-5 */ <342 1>,<343 1>,<344 1>,/* cq6-8 */ <345 1>,<346 1>,<347 1>,/* cq9-11 */ <348 1>,<349 1>,<350 1>,/* cq12-14 */ <351 1>,<352 1>,<353 1>,/* cq15-17 */ <354 1>,<355 1>,<356 1>,/* cq18-20 */ <357 1>,<358 1>,<359 1>,/* cq21-23 */ <360 1>,<361 1>,<362 1>,/* cq24-26 */ <363 1>,<364 1>,<365 1>,/* cq27-29 */ <366 1>,<367 1>/* cq30-31 */ <376 4>,/* fatal ecc */ <381 4>;/* fatal axi */ status = "disabled"; };