* Hisilicon 6210 i2s controller Required properties: - compatible: should be one of the following: - "hisilicon,hi6210-i2s" - reg: physical base address of the i2s controller unit and length of memory mapped region. - interrupts: should contain the i2s interrupt. - clocks: a list of phandle + clock-specifier pairs, one for each entry in clock-names. - clock-names: should contain following: - "dacodec" - "i2s-base" - dmas: DMA specifiers for tx dma. See the DMA client binding, Documentation/devicetree/bindings/dma/dma.txt - dma-names: should be "tx" and "rx" - hisilicon,sysctrl-syscon: phandle to sysctrl syscon - #sound-dai-cells: Should be set to 1 (for multi-dai) - The dai cell indexes reference the following interfaces: 0: S2 interface (Currently that is the only one available, but more may be supported in the future) Example for the hi6210 i2s controller: i2s0: i2s@f7118000{ compatible = "hisilicon,hi6210-i2s"; reg = <0x0 0xf7118000 0x0 0x8000>; /* i2s unit */ interrupts = ; /* 155 "DigACodec_intr"-32 */ clocks = <&sys_ctrl HI6220_DACODEC_PCLK>, <&sys_ctrl HI6220_BBPPLL0_DIV>; clock-names = "dacodec", "i2s-base"; dmas = <&dma0 15 &dma0 14>; dma-names = "rx", "tx"; hisilicon,sysctrl-syscon = <&sys_ctrl>; #sound-dai-cells = <1>; }; Then when referencing the i2s controller: sound-dai = <&i2s0 0>; /* index 0 => S2 interface */