Freescale i.MX audio complex with SGTL5000 codec Required properties: - compatible : "fsl,imx-audio-sgtl5000" - model : The user-visible name of this sound complex - ssi-controller : The phandle of the i.MX SSI controller - audio-codec : The phandle of the SGTL5000 audio codec - audio-routing : A list of the connections between audio components. Each entry is a pair of strings, the first being the connection's sink, the second being the connection's source. Valid names could be power supplies, SGTL5000 pins, and the jacks on the board: Power supplies: * Mic Bias SGTL5000 pins: * MIC_IN * LINE_IN * HP_OUT * LINE_OUT Board connectors: * Mic Jack * Line In Jack * Headphone Jack * Line Out Jack * Ext Spk - mux-int-port : The internal port of the i.MX audio muxer (AUDMUX) - mux-ext-port : The external port of the i.MX audio muxer Note: The AUDMUX port numbering should start at 1, which is consistent with hardware manual. Example: sound { compatible = "fsl,imx51-babbage-sgtl5000", "fsl,imx-audio-sgtl5000"; model = "imx51-babbage-sgtl5000"; ssi-controller = <&ssi1>; audio-codec = <&sgtl5000>; audio-routing = "MIC_IN", "Mic Jack", "Mic Jack", "Mic Bias", "Headphone Jack", "HP_OUT"; mux-int-port = <1>; mux-ext-port = <3>; };