Freescale i.MX audio complex with WM8962 codec Required properties: - compatible : "fsl,imx-audio-wm8962" - model : The user-visible name of this sound complex - ssi-controller : The phandle of the i.MX SSI controller - audio-codec : The phandle of the WM8962 audio codec - audio-routing : A list of the connections between audio components. Each entry is a pair of strings, the first being the connection's sink, the second being the connection's source. Valid names could be power supplies, WM8962 pins, and the jacks on the board: Power supplies: * Mic Bias Board connectors: * Mic Jack * Headphone Jack * Ext Spk - mux-int-port : The internal port of the i.MX audio muxer (AUDMUX) - mux-ext-port : The external port of the i.MX audio muxer Note: The AUDMUX port numbering should start at 1, which is consistent with hardware manual. Example: sound { compatible = "fsl,imx6q-sabresd-wm8962", "fsl,imx-audio-wm8962"; model = "wm8962-audio"; ssi-controller = <&ssi2>; audio-codec = <&codec>; audio-routing = "Headphone Jack", "HPOUTL", "Headphone Jack", "HPOUTR", "Ext Spk", "SPKOUTL", "Ext Spk", "SPKOUTR", "MICBIAS", "AMIC", "IN3R", "MICBIAS", "DMIC", "MICBIAS", "DMICDAT", "DMIC"; mux-int-port = <2>; mux-ext-port = <3>; };