# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/sound/rockchip,i2s-tdm.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Rockchip I2S/TDM Controller description: The Rockchip I2S/TDM Controller is a Time Division Multiplexed audio interface found in various Rockchip SoCs, allowing up to 8 channels of audio over a serial interface. maintainers: - Nicolas Frattaroli allOf: - $ref: dai-common.yaml# properties: compatible: enum: - rockchip,px30-i2s-tdm - rockchip,rk1808-i2s-tdm - rockchip,rk3308-i2s-tdm - rockchip,rk3568-i2s-tdm - rockchip,rk3588-i2s-tdm - rockchip,rv1126-i2s-tdm reg: maxItems: 1 interrupts: maxItems: 1 dmas: minItems: 1 maxItems: 2 dma-names: minItems: 1 maxItems: 2 items: enum: - rx - tx clocks: minItems: 3 items: - description: clock for TX - description: clock for RX - description: AHB clock driving the interface - description: Parent clock for mclk_tx (only required when using mclk-calibrate) - description: Parent clock for mclk_rx (only required when using mclk-calibrate) - description: Clock for sample rates that are an integer multiple of 8000 (only required when using mclk-calibrate) - description: Clock for sample rates that are an integer multiple of 11025 (only required when using mclk-calibrate) clock-names: minItems: 3 items: - const: mclk_tx - const: mclk_rx - const: hclk - const: mclk_tx_src - const: mclk_rx_src - const: mclk_root0 - const: mclk_root1 resets: minItems: 1 maxItems: 2 description: resets for the tx and rx directions reset-names: minItems: 1 maxItems: 2 items: enum: - tx-m - rx-m port: $ref: audio-graph-port.yaml# unevaluatedProperties: false power-domains: maxItems: 1 rockchip,grf: $ref: /schemas/types.yaml#/definitions/phandle description: The phandle of the syscon node for the GRF register. rockchip,trcm-sync-tx-only: type: boolean description: Use TX BCLK/LRCK for both TX and RX. rockchip,trcm-sync-rx-only: type: boolean description: Use RX BCLK/LRCK for both TX and RX. "#sound-dai-cells": const: 0 rockchip,i2s-rx-route: $ref: /schemas/types.yaml#/definitions/uint32-array description: Defines the mapping of I2S RX sdis to I2S data bus lines. By default, they are mapped one-to-one. rockchip,i2s-rx-route = <3> would mean sdi3 is receiving from data0. maxItems: 4 items: enum: [0, 1, 2, 3] rockchip,i2s-tx-route: $ref: /schemas/types.yaml#/definitions/uint32-array description: Defines the mapping of I2S TX sdos to I2S data bus lines. By default, they are mapped one-to-one. rockchip,i2s-tx-route = <3> would mean sdo3 is sending to data0. maxItems: 4 items: enum: [0, 1, 2, 3] rockchip,io-multiplex: description: Specify that the GPIO lines on the I2S bus are multiplexed such that the direction (input/output) needs to be dynamically adjusted. type: boolean required: - compatible - reg - interrupts - dmas - dma-names - clocks - clock-names - resets - reset-names - "#sound-dai-cells" unevaluatedProperties: false examples: - | #include #include #include #include bus { #address-cells = <2>; #size-cells = <2>; i2s@fe410000 { compatible = "rockchip,rk3568-i2s-tdm"; reg = <0x0 0xfe410000 0x0 0x1000>; interrupts = ; clocks = <&cru MCLK_I2S1_8CH_TX>, <&cru MCLK_I2S1_8CH_RX>, <&cru HCLK_I2S1_8CH>; clock-names = "mclk_tx", "mclk_rx", "hclk"; dmas = <&dmac1 3>, <&dmac1 2>; dma-names = "rx", "tx"; resets = <&cru SRST_M_I2S1_8CH_TX>, <&cru SRST_M_I2S1_8CH_RX>; reset-names = "tx-m", "rx-m"; rockchip,trcm-sync-tx-only; rockchip,grf = <&grf>; #sound-dai-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_sclkrx &i2s1m0_lrcktx &i2s1m0_lrckrx &i2s1m0_sdi0 &i2s1m0_sdi1 &i2s1m0_sdi2 &i2s1m0_sdi3 &i2s1m0_sdo0 &i2s1m0_sdo1 &i2s1m0_sdo2 &i2s1m0_sdo3>; }; };