* Rockchip I2S controller The I2S bus (Inter-IC sound bus) is a serial link for digital audio data transfer between devices in the system. Required properties: - compatible: should be one of the following: - "rockchip,rk3066-i2s": for rk3066 - "rockchip,rk3036-i2s", "rockchip,rk3066-i2s": for rk3036 - "rockchip,rk3188-i2s", "rockchip,rk3066-i2s": for rk3188 - "rockchip,rk3228-i2s", "rockchip,rk3066-i2s": for rk3228 - "rockchip,rk3288-i2s", "rockchip,rk3066-i2s": for rk3288 - "rockchip,rk3328-i2s", "rockchip,rk3066-i2s": for rk3328 - "rockchip,rk3366-i2s", "rockchip,rk3066-i2s": for rk3366 - "rockchip,rk3368-i2s", "rockchip,rk3066-i2s": for rk3368 - "rockchip,rk3399-i2s", "rockchip,rk3066-i2s": for rk3399 - reg: physical base address of the controller and length of memory mapped region. - interrupts: should contain the I2S interrupt. - dmas: DMA specifiers for tx and rx dma. See the DMA client binding, Documentation/devicetree/bindings/dma/dma.txt - dma-names: should include "tx" and "rx". - clocks: a list of phandle + clock-specifer pairs, one for each entry in clock-names. - clock-names: should contain the following: - "i2s_hclk": clock for I2S BUS - "i2s_clk" : clock for I2S controller - rockchip,playback-channels: max playback channels, if not set, 8 channels default. - rockchip,capture-channels: max capture channels, if not set, 2 channels default. Required properties for controller which support multi channels playback/capture: - rockchip,grf: the phandle of the syscon node for GRF register. Example for rk3288 I2S controller: i2s@ff890000 { compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s"; reg = <0xff890000 0x10000>; interrupts = ; dmas = <&pdma1 0>, <&pdma1 1>; dma-names = "tx", "rx"; clock-names = "i2s_hclk", "i2s_clk"; clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>; rockchip,playback-channels = <8>; rockchip,capture-channels = <2>; };