RT1011 Mono Class D Audio Amplifier This device supports I2C only. Required properties: - compatible : "realtek,rt1011". - reg : The I2C address of the device. This I2C address decide by two input pins (ASEL1 and ASEL2). ------------------------------------- | ASEL2 | ASEL1 | Address | ------------------------------------- | 0 | 0 | 0x38 | ------------------------------------- | 0 | 1 | 0x39 | ------------------------------------- | 1 | 0 | 0x3a | ------------------------------------- | 1 | 1 | 0x3b | ------------------------------------- Optional properties: - realtek,temperature_calib u32. The temperature was measured while doing the calibration. Units: Celsius degree - realtek,r0_calib u32. This is r0 calibration data which was measured in factory mode. Pins on the device (for linking into audio routes) for RT1011: * SPO Example: rt1011: codec@38 { compatible = "realtek,rt1011"; reg = <0x38>; realtek,temperature_calib = <25>; realtek,r0_calib = <0x224050>; };