Texas Instruments TAS5086 6-channel PWM Processor Required properties: - compatible: Should contain "ti,tas5086". - reg: The i2c address. Should contain <0x1b>. Optional properties: - reset-gpio: A GPIO spec to define which pin is connected to the chip's !RESET pin. If specified, the driver will assert a hardware reset at probe time. - ti,charge-period: This property should contain the time in microseconds that closely matches the external single-ended split-capacitor charge period. The hardware chip waits for this period of time before starting the PWM signals. This helps reduce pops and clicks. When not specified, the hardware default of 1300ms is retained. - ti,mid-z-channel-X: Boolean properties, X being a number from 1 to 6. If given, channel X will start with the Mid-Z start sequence, otherwise the default Low-Z scheme is used. The correct configuration depends on how the power stages connected to the PWM output pins work. Not all power stages are compatible to Mid-Z - please refer to the datasheets for more details. Most systems should not set any of these properties. - avdd-supply: Power supply for AVDD, providing 3.3V - dvdd-supply: Power supply for DVDD, providing 3.3V Examples: i2c_bus { tas5086@1b { compatible = "ti,tas5086"; reg = <0x1b>; reset-gpio = <&gpio 23 0>; ti,charge-period = <156000>; avdd-supply = <&vdd_3v3_reg>; dvdd-supply = <&vdd_3v3_reg>; }; };