Binding for Thermal Sensor driver for STMicroelectronics STi series of SoCs. Required parameters: ------------------- compatible : Should be "st,stih407-thermal" clock-names : Should be "thermal". See: Documentation/devicetree/bindings/resource-names.txt clocks : Phandle of the clock used by the thermal sensor. See: Documentation/devicetree/bindings/clock/clock-bindings.txt Optional parameters: ------------------- reg : For non-sysconf based sensors, this should be the physical base address and length of the sensor's registers. interrupts : Standard way to define interrupt number. NB: For thermal sensor's for which no interrupt has been defined, a polling delay of 1000ms will be used to read the temperature from device. Example: temp0@91a0000 { compatible = "st,stih407-thermal"; reg = <0x91a0000 0x28>; clock-names = "thermal"; clocks = <&CLK_SYSIN>; interrupts = ; st,passive_cooling_temp = <110>; };