* Device tree bindings for Texas Instruments DaVinci timer This document provides bindings for the 64-bit timer in the DaVinci architecture devices. The timer can be configured as a general-purpose 64-bit timer, dual general-purpose 32-bit timers. When configured as dual 32-bit timers, each half can operate in conjunction (chain mode) or independently (unchained mode) of each other. The timer is a free running up-counter and can generate interrupts when the counter reaches preset counter values. Also see ../watchdog/davinci-wdt.txt for timers that are configurable as watchdog timers. Required properties: - compatible : should be "ti,da830-timer". - reg : specifies base physical address and count of the registers. - interrupts : interrupts generated by the timer. - interrupt-names: should be "tint12", "tint34", "cmpint0", "cmpint1", "cmpint2", "cmpint3", "cmpint4", "cmpint5", "cmpint6", "cmpint7" ("cmpintX" may be omitted if not present in the hardware). - clocks : the clock feeding the timer clock. Example: clocksource: timer@20000 { compatible = "ti,da830-timer"; reg = <0x20000 0x1000>; interrupts = <21>, <22>, <74>, <75>, <76>, <77>, <78>, <79>, <80>, <81>; interrupt-names = "tint12", "tint34", "cmpint0", "cmpint1", "cmpint2", "cmpint3", "cmpint4", "cmpint5", "cmpint6", "cmpint7"; clocks = <&pll0_auxclk>; };