TI Keystone Soc USB Controller DWC3 GLUE Required properties: - compatible: should be "ti,keystone-dwc3". - #address-cells, #size-cells : should be '1' if the device has sub-nodes with 'reg' property. - reg : Address and length of the register set for the USB subsystem on the SOC. - interrupts : The irq number of this device that is used to interrupt the MPU. - ranges: allows valid 1:1 translation between child's address space and parent's address space. - clocks: Clock IDs array as required by the controller. - clock-names: names of clocks correseponding to IDs in the clock property. Sub-nodes: The dwc3 core should be added as subnode to Keystone DWC3 glue. - dwc3 : The binding details of dwc3 can be found in: Documentation/devicetree/bindings/usb/dwc3.txt Example: usb: usb@2680000 { compatible = "ti,keystone-dwc3"; #address-cells = <1>; #size-cells = <1>; reg = <0x2680000 0x10000>; clocks = <&clkusb>; clock-names = "usb"; interrupts = ; ranges; status = "disabled"; dwc3@2690000 { compatible = "synopsys,dwc3"; reg = <0x2690000 0x70000>; interrupts = ; usb-phy = <&usb_phy>, <&usb_phy>; }; };