// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright 2022 Broadcom Ltd. */ #include #include / { compatible = "brcm,bcm6756", "brcm,bcmbca"; #address-cells = <1>; #size-cells = <1>; interrupt-parent = <&gic>; cpus { #address-cells = <1>; #size-cells = <0>; CA7_0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x0>; next-level-cache = <&L2_0>; enable-method = "psci"; }; CA7_1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x1>; next-level-cache = <&L2_0>; enable-method = "psci"; }; CA7_2: cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x2>; next-level-cache = <&L2_0>; enable-method = "psci"; }; CA7_3: cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x3>; next-level-cache = <&L2_0>; enable-method = "psci"; }; L2_0: l2-cache0 { compatible = "cache"; }; }; timer { compatible = "arm,armv7-timer"; interrupts = , , , ; arm,cpu-registers-not-fw-configured; }; pmu: pmu { compatible = "arm,cortex-a7-pmu"; interrupts = , , , ; interrupt-affinity = <&CA7_0>, <&CA7_1>, <&CA7_2>, <&CA7_3>; }; clocks: clocks { periph_clk: periph-clk { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <200000000>; }; uart_clk: uart-clk { compatible = "fixed-factor-clock"; #clock-cells = <0>; clocks = <&periph_clk>; clock-div = <4>; clock-mult = <1>; }; }; psci { compatible = "arm,psci-0.2"; method = "smc"; }; axi@81000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x81000000 0x8000>; gic: interrupt-controller@1000 { compatible = "arm,cortex-a7-gic"; #interrupt-cells = <3>; interrupt-controller; interrupts = ; reg = <0x1000 0x1000>, <0x2000 0x2000>, <0x4000 0x2000>, <0x6000 0x2000>; }; }; bus@ff800000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0 0xff800000 0x800000>; uart0: serial@12000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x12000 0x1000>; interrupts = ; clocks = <&uart_clk>, <&uart_clk>; clock-names = "uartclk", "apb_pclk"; status = "disabled"; }; }; };