// SPDX-License-Identifier: GPL-2.0+ OR MIT /* * Copyright 2014-2020 Toradex * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. */ /dts-v1/; #include #include #include "imx6dl.dtsi" #include "imx6qdl-colibri.dtsi" / { model = "Toradex Colibri iMX6DL/S on Colibri Evaluation Board V3"; compatible = "toradex,colibri_imx6dl-eval-v3", "toradex,colibri_imx6dl", "fsl,imx6dl"; /* Will be filled by the bootloader */ memory@10000000 { device_type = "memory"; reg = <0x10000000 0>; }; aliases { i2c0 = &i2c2; i2c1 = &i2c3; }; aliases { rtc0 = &rtc_i2c; rtc1 = &snvs_rtc; }; chosen { stdout-path = "serial0:115200n8"; }; /* Fixed crystal dedicated to mcp251x */ clk16m: clock-16m { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <16000000>; clock-output-names = "clk16m"; }; gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; wakeup { label = "Wake-Up"; gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* SODIMM 45 */ linux,code = ; debounce-interval = <10>; wakeup-source; }; }; lcd_display: disp0 { compatible = "fsl,imx-parallel-display"; #address-cells = <1>; #size-cells = <0>; interface-pix-fmt = "bgr666"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ipu1_lcdif>; status = "okay"; port@0 { reg = <0>; lcd_display_in: endpoint { remote-endpoint = <&ipu1_di0_disp0>; }; }; port@1 { reg = <1>; lcd_display_out: endpoint { remote-endpoint = <&lcd_panel_in>; }; }; }; panel: panel { /* * edt,et057090dhu: EDT 5.7" LCD TFT * edt,et070080dh6: EDT 7.0" LCD TFT */ compatible = "edt,et057090dhu"; backlight = <&backlight>; port { lcd_panel_in: endpoint { remote-endpoint = <&lcd_display_out>; }; }; }; }; &backlight { brightness-levels = <0 127 191 223 239 247 251 255>; default-brightness-level = <1>; status = "okay"; }; /* Colibri SSP */ &ecspi4 { status = "okay"; mcp251x0: mcp251x@0 { compatible = "microchip,mcp2515"; reg = <0>; clocks = <&clk16m>; interrupt-parent = <&gpio3>; interrupts = <27 0x2>; spi-max-frequency = <10000000>; status = "okay"; }; }; &hdmi { status = "okay"; }; /* * Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board) */ &i2c3 { status = "okay"; /* * Touchscreen is using SODIMM 28/30, also used for PWM, PWM, * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms */ touchscreen@4a { compatible = "atmel,maxtouch"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcap_1>; reg = <0x4a>; interrupt-parent = <&gpio1>; interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 28 */ reset-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; /* SODIMM 30 */ status = "disabled"; }; /* M41T0M6 real time clock on carrier board */ rtc_i2c: rtc@68 { compatible = "st,m41t0"; reg = <0x68>; }; }; &iomuxc { pinctrl-names = "default"; pinctrl-0 = < &pinctrl_weim_gpio_1 &pinctrl_weim_gpio_2 &pinctrl_weim_gpio_3 &pinctrl_weim_gpio_4 &pinctrl_weim_gpio_5 &pinctrl_weim_gpio_6 &pinctrl_usbh_oc_1 &pinctrl_usbc_id_1 >; pinctrl_pcap_1: pcap1grp { fsl,pins = < MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 /* SODIMM 28 */ MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 /* SODIMM 30 */ >; }; pinctrl_mxt_ts: mxttsgrp { fsl,pins = < MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x130b0 /* SODIMM 107 */ MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x130b0 /* SODIMM 106 */ >; }; }; &ipu1_di0_disp0 { remote-endpoint = <&lcd_display_in>; }; &pwm1 { status = "okay"; }; &pwm2 { status = "okay"; }; &pwm3 { status = "okay"; }; &pwm4 { status = "okay"; }; ®_usb_host_vbus { status = "okay"; }; &uart1 { status = "okay"; }; &uart2 { status = "okay"; }; &uart3 { status = "okay"; }; &usbh1 { vbus-supply = <®_usb_host_vbus>; status = "okay"; }; &usbotg { status = "okay"; }; /* Colibri MMC */ &usdhc1 { status = "okay"; }; &weim { status = "okay"; /* weim memory map: 32MB on CS0, CS1, CS2 and CS3 */ ranges = <0 0 0x08000000 0x02000000 1 0 0x0a000000 0x02000000 2 0 0x0c000000 0x02000000 3 0 0x0e000000 0x02000000>; /* SRAM on Colibri nEXT_CS0 */ sram@0,0 { compatible = "cypress,cy7c1019dv33-10zsxi", "mtd-ram"; reg = <0 0 0x00010000>; #address-cells = <1>; #size-cells = <1>; bank-width = <2>; fsl,weim-cs-timing = <0x00010081 0x00000000 0x04000000 0x00000000 0x04000040 0x00000000>; }; /* SRAM on Colibri nEXT_CS1 */ sram@1,0 { compatible = "cypress,cy7c1019dv33-10zsxi", "mtd-ram"; reg = <1 0 0x00010000>; #address-cells = <1>; #size-cells = <1>; bank-width = <2>; fsl,weim-cs-timing = <0x00010081 0x00000000 0x04000000 0x00000000 0x04000040 0x00000000>; }; };