/* * Copyright 2013-2014 Freescale Semiconductor, Inc. * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual * licensing only applies to this file, and not this project as a * whole. * * a) This file is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public * License along with this file; if not, write to the Free * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, * MA 02110-1301 USA * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following * conditions: * * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; #include "ls1021a.dtsi" / { model = "LS1021A QDS Board"; aliases { enet0_rgmii_phy = &rgmii_phy1; enet1_rgmii_phy = &rgmii_phy2; enet2_rgmii_phy = &rgmii_phy3; enet0_sgmii_phy = &sgmii_phy1c; enet1_sgmii_phy = &sgmii_phy1d; }; sys_mclk: clock-mclk { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <24576000>; }; regulators { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <0>; reg_3p3v: regulator@0 { compatible = "regulator-fixed"; reg = <0>; regulator-name = "3P3V"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; }; sound { compatible = "simple-audio-card"; simple-audio-card,format = "i2s"; simple-audio-card,widgets = "Microphone", "Microphone Jack", "Headphone", "Headphone Jack", "Speaker", "Speaker Ext", "Line", "Line In Jack"; simple-audio-card,routing = "MIC_IN", "Microphone Jack", "Microphone Jack", "Mic Bias", "LINE_IN", "Line In Jack", "Headphone Jack", "HP_OUT", "Speaker Ext", "LINE_OUT"; simple-audio-card,cpu { sound-dai = <&sai2>; frame-master; bitclock-master; }; simple-audio-card,codec { sound-dai = <&codec>; frame-master; bitclock-master; }; }; }; &dspi0 { bus-num = <0>; status = "okay"; dspiflash: at45db021d@0 { #address-cells = <1>; #size-cells = <1>; compatible = "atmel,at45db021d", "atmel,at45", "atmel,dataflash"; spi-max-frequency = <16000000>; spi-cpol; spi-cpha; reg = <0>; }; }; &enet0 { tbi-handle = <&tbi0>; phy-handle = <&sgmii_phy1c>; phy-connection-type = "sgmii"; status = "okay"; }; &enet1 { tbi-handle = <&tbi0>; phy-handle = <&sgmii_phy1d>; phy-connection-type = "sgmii"; status = "okay"; }; &enet2 { phy-handle = <&rgmii_phy3>; phy-connection-type = "rgmii-id"; status = "okay"; }; &i2c0 { status = "okay"; pca9547: mux@77 { compatible = "nxp,pca9547"; reg = <0x77>; #address-cells = <1>; #size-cells = <0>; i2c@0 { #address-cells = <1>; #size-cells = <0>; reg = <0x0>; ds3232: rtc@68 { compatible = "dallas,ds3232"; reg = <0x68>; interrupts = ; }; }; i2c@2 { #address-cells = <1>; #size-cells = <0>; reg = <0x2>; ina220@40 { compatible = "ti,ina220"; reg = <0x40>; shunt-resistor = <1000>; }; ina220@41 { compatible = "ti,ina220"; reg = <0x41>; shunt-resistor = <1000>; }; }; i2c@3 { #address-cells = <1>; #size-cells = <0>; reg = <0x3>; eeprom@56 { compatible = "atmel,24c512"; reg = <0x56>; }; eeprom@57 { compatible = "atmel,24c512"; reg = <0x57>; }; adt7461a@4c { compatible = "adi,adt7461a"; reg = <0x4c>; }; }; i2c@4 { #address-cells = <1>; #size-cells = <0>; reg = <0x4>; codec: sgtl5000@2a { #sound-dai-cells = <0>; compatible = "fsl,sgtl5000"; reg = <0x2a>; VDDA-supply = <®_3p3v>; VDDIO-supply = <®_3p3v>; clocks = <&sys_mclk 1>; }; }; }; }; &ifc { #address-cells = <2>; #size-cells = <1>; /* NOR, NAND Flashes and FPGA on board */ ranges = <0x0 0x0 0x0 0x60000000 0x08000000 0x2 0x0 0x0 0x7e800000 0x00010000 0x3 0x0 0x0 0x7fb00000 0x00000100>; status = "okay"; nor@0,0 { #address-cells = <1>; #size-cells = <1>; compatible = "cfi-flash"; reg = <0x0 0x0 0x8000000>; bank-width = <2>; device-width = <1>; }; fpga: board-control@3,0 { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; reg = <0x3 0x0 0x0000100>; bank-width = <1>; device-width = <1>; ranges = <0 3 0 0x100>; mdio-mux-emi1 { compatible = "mdio-mux-mmioreg"; mdio-parent-bus = <&mdio0>; #address-cells = <1>; #size-cells = <0>; reg = <0x54 1>; /* BRDCFG4 */ mux-mask = <0xe0>; /* EMI1[2:0] */ /* Onboard PHYs */ ls1021amdio0: mdio@0 { reg = <0>; #address-cells = <1>; #size-cells = <0>; rgmii_phy1: ethernet-phy@1 { reg = <0x1>; }; }; ls1021amdio1: mdio@20 { reg = <0x20>; #address-cells = <1>; #size-cells = <0>; rgmii_phy2: ethernet-phy@2 { reg = <0x2>; }; }; ls1021amdio2: mdio@40 { reg = <0x40>; #address-cells = <1>; #size-cells = <0>; rgmii_phy3: ethernet-phy@3 { reg = <0x3>; }; }; ls1021amdio3: mdio@60 { reg = <0x60>; #address-cells = <1>; #size-cells = <0>; sgmii_phy1c: ethernet-phy@1c { reg = <0x1c>; }; }; ls1021amdio4: mdio@80 { reg = <0x80>; #address-cells = <1>; #size-cells = <0>; sgmii_phy1d: ethernet-phy@1d { reg = <0x1d>; }; }; }; }; }; &lpuart0 { status = "okay"; }; &mdio0 { tbi0: tbi-phy@8 { reg = <0x8>; device_type = "tbi-phy"; }; }; &sai2 { status = "okay"; }; &uart0 { status = "okay"; }; &uart1 { status = "okay"; };