// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ */ /dts-v1/; #include "omap36xx.dtsi" #include "omap3-evm-common.dtsi" #include "omap3-evm-processor-common.dtsi" / { model = "TI OMAP37XX EVM (TMDSEVM3730)"; compatible = "ti,omap3-evm-37xx", "ti,omap3630", "ti,omap3"; }; &omap3_pmx_core2 { pinctrl-names = "default"; pinctrl-0 = <&hsusb2_2_pins>; ehci_phy_pins: pinmux_ehci_phy_pins { pinctrl-single,pins = < /* EHCI PHY reset GPIO etk_d7.gpio_21 */ OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4) /* EHCI VBUS etk_d8.gpio_22 */ OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) >; }; /* Used by OHCI and EHCI. OHCI won't work without external phy */ hsusb2_2_pins: pinmux_hsusb2_2_pins { pinctrl-single,pins = < /* etk_d10.hsusb2_clk */ OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d12.hsusb2_dir */ OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) >; }; }; &gpmc { nand@0,0 { compatible = "ti,omap2-nand"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ interrupt-parent = <&gpmc>; interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ <1 IRQ_TYPE_NONE>; /* termcount */ linux,mtd-name= "hynix,h8kds0un0mer-4em"; nand-bus-width = <16>; gpmc,device-width = <2>; ti,nand-ecc-opt = "bch8"; gpmc,sync-clk-ps = <0>; gpmc,cs-on-ns = <0>; gpmc,cs-rd-off-ns = <44>; gpmc,cs-wr-off-ns = <44>; gpmc,adv-on-ns = <6>; gpmc,adv-rd-off-ns = <34>; gpmc,adv-wr-off-ns = <44>; gpmc,we-off-ns = <40>; gpmc,oe-off-ns = <54>; gpmc,access-ns = <64>; gpmc,rd-cycle-ns = <82>; gpmc,wr-cycle-ns = <82>; gpmc,wr-access-ns = <40>; gpmc,wr-data-mux-bus-ns = <0>; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "X-Loader"; reg = <0 0x80000>; }; partition@80000 { label = "U-Boot"; reg = <0x80000 0x1c0000>; }; partition@1c0000 { label = "Environment"; reg = <0x240000 0x40000>; }; partition@280000 { label = "Kernel"; reg = <0x280000 0x500000>; }; partition@780000 { label = "Filesystem"; reg = <0x780000 0x1f880000>; }; }; };