// SPDX-License-Identifier: GPL-2.0-or-later OR MIT // Copyright (c) 2018, Robert Marko #include "qcom-ipq4019.dtsi" #include #include / { model = "8devices Jalapeno"; compatible = "8dev,jalapeno"; }; &tlmm { mdio_pins: mdio_pinmux { pinmux_1 { pins = "gpio53"; function = "mdio"; }; pinmux_2 { pins = "gpio52"; function = "mdc"; }; pinconf { pins = "gpio52", "gpio53"; bias-pull-up; }; }; serial_pins: serial_pinmux { mux { pins = "gpio60", "gpio61"; function = "blsp_uart0"; bias-disable; }; }; spi_0_pins: spi_0_pinmux { pin { function = "blsp_spi0"; pins = "gpio55", "gpio56", "gpio57"; drive-strength = <2>; bias-disable; }; pin_cs { function = "gpio"; pins = "gpio54", "gpio59"; drive-strength = <2>; bias-disable; output-high; }; }; }; &watchdog { status = "okay"; }; &prng { status = "okay"; }; &blsp_dma { status = "okay"; }; &blsp1_spi1 { status = "okay"; pinctrl-0 = <&spi_0_pins>; pinctrl-names = "default"; cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>; flash@0 { status = "okay"; compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <24000000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "SBL1"; reg = <0x00000000 0x00040000>; read-only; }; partition@40000 { label = "MIBIB"; reg = <0x00040000 0x00020000>; read-only; }; partition@60000 { label = "QSEE"; reg = <0x00060000 0x00060000>; read-only; }; partition@c0000 { label = "CDT"; reg = <0x000c0000 0x00010000>; read-only; }; partition@d0000 { label = "DDRPARAMS"; reg = <0x000d0000 0x00010000>; read-only; }; partition@e0000 { label = "u-boot-env"; reg = <0x000e0000 0x00010000>; }; partition@f0000 { label = "u-boot"; reg = <0x000f0000 0x00080000>; read-only; }; partition@170000 { label = "ART"; reg = <0x00170000 0x00010000>; read-only; }; }; }; spi-nand@1 { status = "okay"; compatible = "spi-nand"; reg = <1>; spi-max-frequency = <24000000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "ubi1"; reg = <0x00000000 0x04000000>; }; partition@4000000 { label = "ubi2"; reg = <0x04000000 0x04000000>; }; }; }; }; &blsp1_uart1 { status = "okay"; pinctrl-0 = <&serial_pins>; pinctrl-names = "default"; }; &cryptobam { status = "okay"; }; &crypto { status = "okay"; }; &mdio { status = "okay"; pinctrl-0 = <&mdio_pins>; pinctrl-names = "default"; }; &wifi0 { status = "okay"; qcom,ath10k-calibration-variant = "8devices-Jalapeno"; }; &wifi1 { status = "okay"; qcom,ath10k-calibration-variant = "8devices-Jalapeno"; }; &usb3_ss_phy { status = "okay"; }; &usb3_hs_phy { status = "okay"; }; &usb3 { status = "okay"; }; &usb2_hs_phy { status = "okay"; }; &usb2 { status = "okay"; };