/* * sama5d3xmb_cmp.dts - Device Tree file for SAMA5D3x CMP mother board * * Copyright (C) 2016 Atmel, * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual * licensing only applies to this file, and not this project as a * whole. * * a) This file is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following * conditions: * * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. */ #include "sama5d3xcm_cmp.dtsi" / { compatible = "atmel,sama5d3xmb-cmp", "atmel,sama5d3xcm-cmp", "atmel,sama5d3", "atmel,sama5"; ahb { apb { mmc0: mmc@f0000000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>; status = "okay"; slot@0 { reg = <0>; bus-width = <4>; cd-gpios = <&pioD 17 GPIO_ACTIVE_HIGH>; }; }; spi0: spi@f0004000 { dmas = <0>, <0>; /* Do not use DMA for spi0 */ m25p80@0 { compatible = "atmel,at25df321a"; spi-max-frequency = <50000000>; reg = <0>; }; }; ssc0: ssc@f0008000 { atmel,clk-from-rk-pin; }; /* * i2c0 conflicts with ISI: * disable it to allow the use of ISI * can not enable audio when i2c0 disabled */ i2c0: i2c@f0014000 { wm8904: wm8904@1a { compatible = "wlf,wm8904"; reg = <0x1a>; clocks = <&pck0>; clock-names = "mclk"; }; }; i2c1: i2c@f0018000 { ov2640: camera@30 { compatible = "ovti,ov2640"; reg = <0x30>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>; resetb-gpios = <&pioE 24 GPIO_ACTIVE_LOW>; pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>; /* use pck1 for the master clock of ov2640 */ clocks = <&pck1>; clock-names = "xvclk"; assigned-clocks = <&pck1>; assigned-clock-rates = <25000000>; port { ov2640_0: endpoint { remote-endpoint = <&isi_0>; bus-width = <8>; }; }; }; }; usart1: serial@f0020000 { dmas = <0>, <0>; /* Do not use DMA for usart1 */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>; status = "okay"; }; isi: isi@f0034000 { port { isi_0: endpoint { remote-endpoint = <&ov2640_0>; bus-width = <8>; vsync-active = <1>; hsync-active = <1>; }; }; }; mmc1: mmc@f8000000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>; status = "okay"; slot@0 { reg = <0>; bus-width = <4>; cd-gpios = <&pioD 18 GPIO_ACTIVE_HIGH>; }; }; adc0: adc@f8018000 { pinctrl-names = "default", "sleep"; pinctrl-0 = < &pinctrl_adc0_adtrg &pinctrl_adc0_ad0 &pinctrl_adc0_ad1 &pinctrl_adc0_ad2 &pinctrl_adc0_ad3 &pinctrl_adc0_ad4 >; pinctrl-1 = < &pinctrl_adc0_adtrg_sleep &pinctrl_adc0_ad0_sleep &pinctrl_adc0_ad1_sleep &pinctrl_adc0_ad2_sleep &pinctrl_adc0_ad3_sleep &pinctrl_adc0_ad4_sleep >; status = "okay"; }; macb1: ethernet@f802c000 { phy-mode = "rmii"; #address-cells = <1>; #size-cells = <0>; phy0: ethernet-phy@1 { /*interrupt-parent = <&pioE>;*/ /*interrupts = <30 IRQ_TYPE_EDGE_FALLING>;*/ reg = <1>; }; }; pinctrl@fffff200 { adc0 { pinctrl_adc0_adtrg_sleep: adc0_adtrg_1 { atmel,pins = ; }; pinctrl_adc0_ad0_sleep: adc0_ad0_1 { atmel,pins = ; }; pinctrl_adc0_ad1_sleep: adc0_ad1_1 { atmel,pins = ; }; pinctrl_adc0_ad2_sleep: adc0_ad2_1 { atmel,pins = ; }; pinctrl_adc0_ad3_sleep: adc0_ad3_1 { atmel,pins = ; }; pinctrl_adc0_ad4_sleep: adc0_ad4_1 { atmel,pins = ; }; }; board { pinctrl_gpio_keys: gpio_keys { atmel,pins = ; }; pinctrl_mmc0_cd: mmc0_cd { atmel,pins = ; }; pinctrl_mmc1_cd: mmc1_cd { atmel,pins = ; }; pinctrl_pck0_as_audio_mck: pck0_as_audio_mck { atmel,pins = ; }; pinctrl_pck1_as_isi_mck: pck1_as_isi_mck-0 { atmel,pins = ; }; pinctrl_sensor_reset: sensor_reset-0 { atmel,pins = ; }; pinctrl_sensor_power: sensor_power-0 { atmel,pins = ; }; pinctrl_usba_vbus: usba_vbus { atmel,pins = ; }; }; }; dbgu: serial@ffffee00 { dmas = <0>, <0>; /* Do not use DMA for dbgu */ status = "okay"; }; watchdog@fffffe40 { status = "okay"; }; }; usb0: gadget@500000 { atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usba_vbus>; status = "okay"; }; }; sound { compatible = "atmel,asoc-wm8904"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pck0_as_audio_mck>; atmel,model = "wm8904 @ SAMA5D3EK"; atmel,audio-routing = "Headphone Jack", "HPOUTL", "Headphone Jack", "HPOUTR", "IN2L", "Line In Jack", "IN2R", "Line In Jack", "Mic", "MICBIAS", "IN1L", "Mic"; atmel,ssc-controller = <&ssc0>; atmel,audio-codec = <&wm8904>; status = "disabled"; }; /* Conflict with LCD pins */ gpio_keys { compatible = "gpio-keys"; status = "okay"; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; pb_user1 { label = "pb_user1"; gpios = <&pioE 27 GPIO_ACTIVE_HIGH>; linux,code = <0x100>; wakeup-source; }; }; };