/* * DTS file for SPEAr1310 Evaluation Baord * * Copyright 2012 Viresh Kumar * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License * Version 2 or later at the following locations: * * http://www.opensource.org/licenses/gpl-license.html * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; /include/ "spear1310.dtsi" / { model = "ST SPEAr1310 Evaluation Board"; compatible = "st,spear1310-evb", "st,spear1310"; #address-cells = <1>; #size-cells = <1>; memory { reg = <0 0x40000000>; }; ahb { pinmux@e0700000 { pinctrl-names = "default"; pinctrl-0 = <&state_default>; state_default: pinmux { i2c0 { st,pins = "i2c0_grp"; st,function = "i2c0"; }; i2s0 { st,pins = "i2s0_grp"; st,function = "i2s0"; }; i2s1 { st,pins = "i2s1_grp"; st,function = "i2s1"; }; gpio { st,pins = "arm_gpio_grp"; st,function = "arm_gpio"; }; clcd { st,pins = "clcd_grp" , "clcd_high_res"; st,function = "clcd"; }; eth { st,pins = "gmii_grp"; st,function = "gmii"; }; ssp0 { st,pins = "ssp0_grp"; st,function = "ssp0"; }; kbd { st,pins = "keyboard_6x6_grp"; st,function = "keyboard"; }; sdhci { st,pins = "sdhci_grp"; st,function = "sdhci"; }; smi-pmx { st,pins = "smi_2_chips_grp"; st,function = "smi"; }; uart0 { st,pins = "uart0_grp"; st,function = "uart0"; }; rs485 { st,pins = "rs485_0_1_tdm_0_1_grp"; st,function = "rs485_0_1_tdm_0_1"; }; i2c1_2 { st,pins = "i2c_1_2_grp"; st,function = "i2c_1_2"; }; smii { st,pins = "smii_0_1_2_grp"; st,function = "smii_0_1_2"; }; nand { st,pins = "nand_8bit_grp", "nand_16bit_grp"; st,function = "nand"; }; sata { st,pins = "sata0_grp"; st,function = "sata"; }; pcie { st,pins = "pcie1_grp", "pcie2_grp"; st,function = "pci_express"; }; }; }; ahci@b1000000 { status = "okay"; }; miphy@eb800000 { status = "okay"; }; cf@b2800000 { status = "okay"; }; dma@ea800000 { status = "okay"; }; dma@eb000000 { status = "okay"; }; fsmc: flash@b0000000 { status = "okay"; partition@0 { label = "xloader"; reg = <0x0 0x80000>; }; partition@80000 { label = "u-boot"; reg = <0x80000 0x140000>; }; partition@1C0000 { label = "environment"; reg = <0x1C0000 0x40000>; }; partition@200000 { label = "dtb"; reg = <0x200000 0x40000>; }; partition@240000 { label = "linux"; reg = <0x240000 0xC00000>; }; partition@E40000 { label = "rootfs"; reg = <0xE40000 0x0>; }; }; gpio_keys { compatible = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; button@1 { label = "wakeup"; linux,code = <0x100>; gpios = <&gpio0 7 0x4>; debounce-interval = <20>; wakeup-source; }; }; gmac0: eth@e2000000 { phy-mode = "gmii"; status = "okay"; }; sdhci@b3000000 { status = "okay"; }; smi: flash@ea000000 { status = "okay"; clock-rate=<50000000>; flash@e6000000 { #address-cells = <1>; #size-cells = <1>; reg = <0xe6000000 0x800000>; st,smi-fast-mode; partition@0 { label = "xloader"; reg = <0x0 0x10000>; }; partition@10000 { label = "u-boot"; reg = <0x10000 0x50000>; }; partition@60000 { label = "environment"; reg = <0x60000 0x10000>; }; partition@70000 { label = "dtb"; reg = <0x70000 0x10000>; }; partition@80000 { label = "linux"; reg = <0x80000 0x310000>; }; partition@390000 { label = "rootfs"; reg = <0x390000 0x0>; }; }; }; ehci@e4800000 { status = "okay"; }; ehci@e5800000 { status = "okay"; }; ohci@e4000000 { status = "okay"; }; ohci@e5000000 { status = "okay"; }; apb { adc@e0080000 { status = "okay"; }; gpio0: gpio@e0600000 { status = "okay"; }; gpio1: gpio@e0680000 { status = "okay"; }; gpio@d8400000 { status = "okay"; }; i2c0: i2c@e0280000 { status = "okay"; }; kbd@e0300000 { linux,keymap = < 0x00000001 0x00010002 0x00020003 0x00030004 0x00040005 0x00050006 0x00060007 0x00070008 0x00080009 0x0100000a 0x0101000c 0x0102000d 0x0103000e 0x0104000f 0x01050010 0x01060011 0x01070012 0x01080013 0x02000014 0x02010015 0x02020016 0x02030017 0x02040018 0x02050019 0x0206001a 0x0207001b 0x0208001c 0x0300001d 0x0301001e 0x0302001f 0x03030020 0x03040021 0x03050022 0x03060023 0x03070024 0x03080025 0x04000026 0x04010027 0x04020028 0x04030029 0x0404002a 0x0405002b 0x0406002c 0x0407002d 0x0408002e 0x0500002f 0x05010030 0x05020031 0x05030032 0x05040033 0x05050034 0x05060035 0x05070036 0x05080037 0x06000038 0x06010039 0x0602003a 0x0603003b 0x0604003c 0x0605003d 0x0606003e 0x0607003f 0x06080040 0x07000041 0x07010042 0x07020043 0x07030044 0x07040045 0x07050046 0x07060047 0x07070048 0x07080049 0x0800004a 0x0801004b 0x0802004c 0x0803004d 0x0804004e 0x0805004f 0x08060050 0x08070051 0x08080052 >; autorepeat; st,mode = <0>; suspended_rate = <2000000>; status = "okay"; }; rtc@e0580000 { status = "okay"; }; serial@e0000000 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <>; }; spi0: spi@e0100000 { status = "okay"; num-cs = <3>; cs-gpios = <&gpio1 7 0>, <&spics 0 0>, <&spics 1 0>; stmpe610@0 { compatible = "st,stmpe610"; reg = <0>; #address-cells = <1>; #size-cells = <0>; spi-max-frequency = <1000000>; spi-cpha; pl022,hierarchy = <0>; pl022,interface = <0>; pl022,slave-tx-disable; pl022,com-mode = <0>; pl022,rx-level-trig = <0>; pl022,tx-level-trig = <0>; pl022,ctrl-len = <0x7>; pl022,wait-state = <0>; pl022,duplex = <0>; interrupts = <6 0x4>; interrupt-parent = <&gpio1>; irq-trigger = <0x2>; stmpe_touchscreen { compatible = "st,stmpe-ts"; ts,sample-time = <4>; ts,mod-12b = <1>; ts,ref-sel = <0>; ts,adc-freq = <1>; ts,ave-ctrl = <1>; ts,touch-det-delay = <2>; ts,settling = <2>; ts,fraction-z = <7>; ts,i-drive = <1>; }; }; m25p80@1 { compatible = "st,m25p80"; reg = <1>; spi-max-frequency = <12000000>; spi-cpol; spi-cpha; pl022,hierarchy = <0>; pl022,interface = <0>; pl022,slave-tx-disable; pl022,com-mode = <0x2>; pl022,rx-level-trig = <0>; pl022,tx-level-trig = <0>; pl022,ctrl-len = <0x11>; pl022,wait-state = <0>; pl022,duplex = <0>; }; spidev@2 { compatible = "spidev"; reg = <2>; spi-max-frequency = <25000000>; spi-cpha; pl022,hierarchy = <0>; pl022,interface = <0>; pl022,slave-tx-disable; pl022,com-mode = <0x2>; pl022,rx-level-trig = <0>; pl022,tx-level-trig = <0>; pl022,ctrl-len = <0x11>; pl022,wait-state = <0>; pl022,duplex = <0>; }; }; wdt@ec800620 { status = "okay"; }; }; }; };