/* * Copyright 2015 Vishnu Patekar * * Vishnu Patekar * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual * licensing only applies to this file, and not this project as a * whole. * * a) This file is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following * conditions: * * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. */ #include #include #include #include #include #include #include / { interrupt-parent = <&gic>; #address-cells = <1>; #size-cells = <1>; cpus { #address-cells = <1>; #size-cells = <0>; cpu0: cpu@0 { compatible = "arm,cortex-a7"; device_type = "cpu"; clocks = <&ccu CLK_C0CPUX>; operating-points-v2 = <&cpu0_opp_table>; cci-control-port = <&cci_control0>; enable-method = "allwinner,sun8i-a83t-smp"; reg = <0>; #cooling-cells = <2>; }; cpu@1 { compatible = "arm,cortex-a7"; device_type = "cpu"; clocks = <&ccu CLK_C0CPUX>; operating-points-v2 = <&cpu0_opp_table>; cci-control-port = <&cci_control0>; enable-method = "allwinner,sun8i-a83t-smp"; reg = <1>; #cooling-cells = <2>; }; cpu@2 { compatible = "arm,cortex-a7"; device_type = "cpu"; clocks = <&ccu CLK_C0CPUX>; operating-points-v2 = <&cpu0_opp_table>; cci-control-port = <&cci_control0>; enable-method = "allwinner,sun8i-a83t-smp"; reg = <2>; #cooling-cells = <2>; }; cpu@3 { compatible = "arm,cortex-a7"; device_type = "cpu"; clocks = <&ccu CLK_C0CPUX>; operating-points-v2 = <&cpu0_opp_table>; cci-control-port = <&cci_control0>; enable-method = "allwinner,sun8i-a83t-smp"; reg = <3>; #cooling-cells = <2>; }; cpu100: cpu@100 { compatible = "arm,cortex-a7"; device_type = "cpu"; clocks = <&ccu CLK_C1CPUX>; operating-points-v2 = <&cpu1_opp_table>; cci-control-port = <&cci_control1>; enable-method = "allwinner,sun8i-a83t-smp"; reg = <0x100>; #cooling-cells = <2>; }; cpu@101 { compatible = "arm,cortex-a7"; device_type = "cpu"; clocks = <&ccu CLK_C1CPUX>; operating-points-v2 = <&cpu1_opp_table>; cci-control-port = <&cci_control1>; enable-method = "allwinner,sun8i-a83t-smp"; reg = <0x101>; #cooling-cells = <2>; }; cpu@102 { compatible = "arm,cortex-a7"; device_type = "cpu"; clocks = <&ccu CLK_C1CPUX>; operating-points-v2 = <&cpu1_opp_table>; cci-control-port = <&cci_control1>; enable-method = "allwinner,sun8i-a83t-smp"; reg = <0x102>; #cooling-cells = <2>; }; cpu@103 { compatible = "arm,cortex-a7"; device_type = "cpu"; clocks = <&ccu CLK_C1CPUX>; operating-points-v2 = <&cpu1_opp_table>; cci-control-port = <&cci_control1>; enable-method = "allwinner,sun8i-a83t-smp"; reg = <0x103>; #cooling-cells = <2>; }; }; timer { compatible = "arm,armv7-timer"; interrupts = , , , ; }; clocks { #address-cells = <1>; #size-cells = <1>; ranges; /* TODO: PRCM block has a mux for this. */ osc24M: osc24M_clk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; clock-accuracy = <50000>; clock-output-names = "osc24M"; }; /* * This is called "internal OSC" in some places. * It is an internal RC-based oscillator. * TODO: Its controls are in the PRCM block. */ osc16M: osc16M_clk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <16000000>; clock-output-names = "osc16M"; }; osc16Md512: osc16Md512_clk { #clock-cells = <0>; compatible = "fixed-factor-clock"; clock-div = <512>; clock-mult = <1>; clocks = <&osc16M>; clock-output-names = "osc16M-d512"; }; }; de: display-engine { compatible = "allwinner,sun8i-a83t-display-engine"; allwinner,pipelines = <&mixer0>, <&mixer1>; status = "disabled"; }; cpu0_opp_table: opp_table0 { compatible = "operating-points-v2"; opp-shared; opp-480000000 { opp-hz = /bits/ 64 <480000000>; opp-microvolt = <840000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; opp-600000000 { opp-hz = /bits/ 64 <600000000>; opp-microvolt = <840000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; opp-720000000 { opp-hz = /bits/ 64 <720000000>; opp-microvolt = <840000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; opp-864000000 { opp-hz = /bits/ 64 <864000000>; opp-microvolt = <840000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; opp-912000000 { opp-hz = /bits/ 64 <912000000>; opp-microvolt = <840000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; opp-1008000000 { opp-hz = /bits/ 64 <1008000000>; opp-microvolt = <840000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; opp-1128000000 { opp-hz = /bits/ 64 <1128000000>; opp-microvolt = <840000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <840000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; }; cpu1_opp_table: opp_table1 { compatible = "operating-points-v2"; opp-shared; opp-480000000 { opp-hz = /bits/ 64 <480000000>; opp-microvolt = <840000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; opp-600000000 { opp-hz = /bits/ 64 <600000000>; opp-microvolt = <840000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; opp-720000000 { opp-hz = /bits/ 64 <720000000>; opp-microvolt = <840000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; opp-864000000 { opp-hz = /bits/ 64 <864000000>; opp-microvolt = <840000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; opp-912000000 { opp-hz = /bits/ 64 <912000000>; opp-microvolt = <840000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; opp-1008000000 { opp-hz = /bits/ 64 <1008000000>; opp-microvolt = <840000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; opp-1128000000 { opp-hz = /bits/ 64 <1128000000>; opp-microvolt = <840000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <840000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; }; soc { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; display_clocks: clock@1000000 { compatible = "allwinner,sun8i-a83t-de2-clk"; reg = <0x01000000 0x100000>; clocks = <&ccu CLK_PLL_DE>, <&ccu CLK_BUS_DE>; clock-names = "mod", "bus"; resets = <&ccu RST_BUS_DE>; #clock-cells = <1>; #reset-cells = <1>; }; mixer0: mixer@1100000 { compatible = "allwinner,sun8i-a83t-de2-mixer-0"; reg = <0x01100000 0x100000>; clocks = <&display_clocks CLK_BUS_MIXER0>, <&display_clocks CLK_MIXER0>; clock-names = "bus", "mod"; resets = <&display_clocks RST_MIXER0>; ports { #address-cells = <1>; #size-cells = <0>; mixer0_out: port@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; mixer0_out_tcon0: endpoint@0 { reg = <0>; remote-endpoint = <&tcon0_in_mixer0>; }; mixer0_out_tcon1: endpoint@1 { reg = <1>; remote-endpoint = <&tcon1_in_mixer0>; }; }; }; }; mixer1: mixer@1200000 { compatible = "allwinner,sun8i-a83t-de2-mixer-1"; reg = <0x01200000 0x100000>; clocks = <&display_clocks CLK_BUS_MIXER1>, <&display_clocks CLK_MIXER1>; clock-names = "bus", "mod"; resets = <&display_clocks RST_WB>; ports { #address-cells = <1>; #size-cells = <0>; mixer1_out: port@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; mixer1_out_tcon0: endpoint@0 { reg = <0>; remote-endpoint = <&tcon0_in_mixer1>; }; mixer1_out_tcon1: endpoint@1 { reg = <1>; remote-endpoint = <&tcon1_in_mixer1>; }; }; }; }; cpucfg@1700000 { compatible = "allwinner,sun8i-a83t-cpucfg"; reg = <0x01700000 0x400>; }; cci@1790000 { compatible = "arm,cci-400"; #address-cells = <1>; #size-cells = <1>; reg = <0x01790000 0x10000>; ranges = <0x0 0x01790000 0x10000>; cci_control0: slave-if@4000 { compatible = "arm,cci-400-ctrl-if"; interface-type = "ace"; reg = <0x4000 0x1000>; }; cci_control1: slave-if@5000 { compatible = "arm,cci-400-ctrl-if"; interface-type = "ace"; reg = <0x5000 0x1000>; }; pmu@9000 { compatible = "arm,cci-400-pmu,r1"; reg = <0x9000 0x5000>; interrupts = , , , , , , , ; }; }; syscon: syscon@1c00000 { compatible = "allwinner,sun8i-a83t-system-controller", "syscon"; reg = <0x01c00000 0x1000>; }; dma: dma-controller@1c02000 { compatible = "allwinner,sun8i-a83t-dma"; reg = <0x01c02000 0x1000>; interrupts = ; clocks = <&ccu CLK_BUS_DMA>; resets = <&ccu RST_BUS_DMA>; #dma-cells = <1>; }; tcon0: lcd-controller@1c0c000 { compatible = "allwinner,sun8i-a83t-tcon-lcd"; reg = <0x01c0c000 0x1000>; interrupts = ; clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>; clock-names = "ahb", "tcon-ch0"; clock-output-names = "tcon-pixel-clock"; #clock-cells = <0>; resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>; reset-names = "lcd", "lvds"; ports { #address-cells = <1>; #size-cells = <0>; tcon0_in: port@0 { #address-cells = <1>; #size-cells = <0>; reg = <0>; tcon0_in_mixer0: endpoint@0 { reg = <0>; remote-endpoint = <&mixer0_out_tcon0>; }; tcon0_in_mixer1: endpoint@1 { reg = <1>; remote-endpoint = <&mixer1_out_tcon0>; }; }; tcon0_out: port@1 { reg = <1>; }; }; }; tcon1: lcd-controller@1c0d000 { compatible = "allwinner,sun8i-a83t-tcon-tv"; reg = <0x01c0d000 0x1000>; interrupts = ; clocks = <&ccu CLK_BUS_TCON1>, <&ccu CLK_TCON1>; clock-names = "ahb", "tcon-ch1"; resets = <&ccu RST_BUS_TCON1>; reset-names = "lcd"; ports { #address-cells = <1>; #size-cells = <0>; tcon1_in: port@0 { #address-cells = <1>; #size-cells = <0>; reg = <0>; tcon1_in_mixer0: endpoint@0 { reg = <0>; remote-endpoint = <&mixer0_out_tcon1>; }; tcon1_in_mixer1: endpoint@1 { reg = <1>; remote-endpoint = <&mixer1_out_tcon1>; }; }; tcon1_out: port@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; tcon1_out_hdmi: endpoint@1 { reg = <1>; remote-endpoint = <&hdmi_in_tcon1>; }; }; }; }; mmc0: mmc@1c0f000 { compatible = "allwinner,sun8i-a83t-mmc", "allwinner,sun7i-a20-mmc"; reg = <0x01c0f000 0x1000>; clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>, <&ccu CLK_MMC0_OUTPUT>, <&ccu CLK_MMC0_SAMPLE>; clock-names = "ahb", "mmc", "output", "sample"; resets = <&ccu RST_BUS_MMC0>; reset-names = "ahb"; interrupts = ; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; mmc1: mmc@1c10000 { compatible = "allwinner,sun8i-a83t-mmc", "allwinner,sun7i-a20-mmc"; reg = <0x01c10000 0x1000>; clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>, <&ccu CLK_MMC1_OUTPUT>, <&ccu CLK_MMC1_SAMPLE>; clock-names = "ahb", "mmc", "output", "sample"; resets = <&ccu RST_BUS_MMC1>; reset-names = "ahb"; interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; mmc2: mmc@1c11000 { compatible = "allwinner,sun8i-a83t-emmc"; reg = <0x01c11000 0x1000>; clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>, <&ccu CLK_MMC2_OUTPUT>, <&ccu CLK_MMC2_SAMPLE>; clock-names = "ahb", "mmc", "output", "sample"; resets = <&ccu RST_BUS_MMC2>; reset-names = "ahb"; interrupts = ; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; sid: eeprom@1c14000 { compatible = "allwinner,sun8i-a83t-sid"; reg = <0x1c14000 0x400>; }; usb_otg: usb@1c19000 { compatible = "allwinner,sun8i-a83t-musb", "allwinner,sun8i-a33-musb"; reg = <0x01c19000 0x0400>; clocks = <&ccu CLK_BUS_OTG>; resets = <&ccu RST_BUS_OTG>; interrupts = ; interrupt-names = "mc"; phys = <&usbphy 0>; phy-names = "usb"; extcon = <&usbphy 0>; dr_mode = "otg"; status = "disabled"; }; usbphy: phy@1c19400 { compatible = "allwinner,sun8i-a83t-usb-phy"; reg = <0x01c19400 0x10>, <0x01c1a800 0x14>, <0x01c1b800 0x14>; reg-names = "phy_ctrl", "pmu1", "pmu2"; clocks = <&ccu CLK_USB_PHY0>, <&ccu CLK_USB_PHY1>, <&ccu CLK_USB_HSIC>, <&ccu CLK_USB_HSIC_12M>; clock-names = "usb0_phy", "usb1_phy", "usb2_phy", "usb2_hsic_12M"; resets = <&ccu RST_USB_PHY0>, <&ccu RST_USB_PHY1>, <&ccu RST_USB_HSIC>; reset-names = "usb0_reset", "usb1_reset", "usb2_reset"; status = "disabled"; #phy-cells = <1>; }; ehci0: usb@1c1a000 { compatible = "allwinner,sun8i-a83t-ehci", "generic-ehci"; reg = <0x01c1a000 0x100>; interrupts = ; clocks = <&ccu CLK_BUS_EHCI0>; resets = <&ccu RST_BUS_EHCI0>; phys = <&usbphy 1>; status = "disabled"; }; ohci0: usb@1c1a400 { compatible = "allwinner,sun8i-a83t-ohci", "generic-ohci"; reg = <0x01c1a400 0x100>; interrupts = ; clocks = <&ccu CLK_BUS_OHCI0>, <&ccu CLK_USB_OHCI0>; resets = <&ccu RST_BUS_OHCI0>; phys = <&usbphy 1>; status = "disabled"; }; ehci1: usb@1c1b000 { compatible = "allwinner,sun8i-a83t-ehci", "generic-ehci"; reg = <0x01c1b000 0x100>; interrupts = ; clocks = <&ccu CLK_BUS_EHCI1>; resets = <&ccu RST_BUS_EHCI1>; phys = <&usbphy 2>; status = "disabled"; }; ccu: clock@1c20000 { compatible = "allwinner,sun8i-a83t-ccu"; reg = <0x01c20000 0x400>; clocks = <&osc24M>, <&osc16Md512>; clock-names = "hosc", "losc"; #clock-cells = <1>; #reset-cells = <1>; }; pio: pinctrl@1c20800 { compatible = "allwinner,sun8i-a83t-pinctrl"; interrupts = , , ; reg = <0x01c20800 0x400>; clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc16Md512>; clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller; #interrupt-cells = <3>; #gpio-cells = <3>; /omit-if-no-ref/ csi_8bit_parallel_pins: csi-8bit-parallel-pins { pins = "PE0", "PE2", "PE3", "PE6", "PE7", "PE8", "PE9", "PE10", "PE11", "PE12", "PE13"; function = "csi"; }; /omit-if-no-ref/ csi_mclk_pin: csi-mclk-pin { pins = "PE1"; function = "csi"; }; emac_rgmii_pins: emac-rgmii-pins { pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD11", "PD12", "PD13", "PD14", "PD18", "PD19", "PD21", "PD22", "PD23"; function = "gmac"; /* * data lines in RGMII mode use DDR mode * and need a higher signal drive strength */ drive-strength = <40>; }; hdmi_pins: hdmi-pins { pins = "PH6", "PH7", "PH8"; function = "hdmi"; }; i2c0_pins: i2c0-pins { pins = "PH0", "PH1"; function = "i2c0"; }; i2c1_pins: i2c1-pins { pins = "PH2", "PH3"; function = "i2c1"; }; /omit-if-no-ref/ i2c2_pe_pins: i2c2-pe-pins { pins = "PE14", "PE15"; function = "i2c2"; }; i2c2_ph_pins: i2c2-ph-pins { pins = "PH4", "PH5"; function = "i2c2"; }; i2s1_pins: i2s1-pins { /* I2S1 does not have external MCLK pin */ pins = "PG10", "PG11", "PG12", "PG13"; function = "i2s1"; }; lcd_lvds_pins: lcd-lvds-pins { pins = "PD18", "PD19", "PD20", "PD21", "PD22", "PD23", "PD24", "PD25", "PD26", "PD27"; function = "lvds0"; }; mmc0_pins: mmc0-pins { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; function = "mmc0"; drive-strength = <30>; bias-pull-up; }; mmc1_pins: mmc1-pins { pins = "PG0", "PG1", "PG2", "PG3", "PG4", "PG5"; function = "mmc1"; drive-strength = <30>; bias-pull-up; }; mmc2_8bit_emmc_pins: mmc2-8bit-emmc-pins { pins = "PC5", "PC6", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PC16"; function = "mmc2"; drive-strength = <30>; bias-pull-up; }; pwm_pin: pwm-pin { pins = "PD28"; function = "pwm"; }; spdif_tx_pin: spdif-tx-pin { pins = "PE18"; function = "spdif"; }; uart0_pb_pins: uart0-pb-pins { pins = "PB9", "PB10"; function = "uart0"; }; uart0_pf_pins: uart0-pf-pins { pins = "PF2", "PF4"; function = "uart0"; }; uart1_pins: uart1-pins { pins = "PG6", "PG7"; function = "uart1"; }; uart1_rts_cts_pins: uart1-rts-cts-pins { pins = "PG8", "PG9"; function = "uart1"; }; /omit-if-no-ref/ uart2_pb_pins: uart2-pb-pins { pins = "PB0", "PB1"; function = "uart2"; }; }; timer@1c20c00 { compatible = "allwinner,sun4i-a10-timer"; reg = <0x01c20c00 0xa0>; interrupts = , ; clocks = <&osc24M>; }; watchdog@1c20ca0 { compatible = "allwinner,sun6i-a31-wdt"; reg = <0x01c20ca0 0x20>; interrupts = ; clocks = <&osc24M>; }; spdif: spdif@1c21000 { #sound-dai-cells = <0>; compatible = "allwinner,sun8i-a83t-spdif", "allwinner,sun8i-h3-spdif"; reg = <0x01c21000 0x400>; interrupts = ; clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>; resets = <&ccu RST_BUS_SPDIF>; clock-names = "apb", "spdif"; dmas = <&dma 2>; dma-names = "tx"; pinctrl-names = "default"; pinctrl-0 = <&spdif_tx_pin>; status = "disabled"; }; i2s0: i2s@1c22000 { #sound-dai-cells = <0>; compatible = "allwinner,sun8i-a83t-i2s"; reg = <0x01c22000 0x400>; interrupts = ; clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>; clock-names = "apb", "mod"; dmas = <&dma 3>, <&dma 3>; resets = <&ccu RST_BUS_I2S0>; dma-names = "rx", "tx"; status = "disabled"; }; i2s1: i2s@1c22400 { #sound-dai-cells = <0>; compatible = "allwinner,sun8i-a83t-i2s"; reg = <0x01c22400 0x400>; interrupts = ; clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>; clock-names = "apb", "mod"; dmas = <&dma 4>, <&dma 4>; resets = <&ccu RST_BUS_I2S1>; dma-names = "rx", "tx"; pinctrl-names = "default"; pinctrl-0 = <&i2s1_pins>; status = "disabled"; }; i2s2: i2s@1c22800 { #sound-dai-cells = <0>; compatible = "allwinner,sun8i-a83t-i2s"; reg = <0x01c22800 0x400>; interrupts = ; clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>; clock-names = "apb", "mod"; dmas = <&dma 27>; resets = <&ccu RST_BUS_I2S2>; dma-names = "tx"; status = "disabled"; }; pwm: pwm@1c21400 { compatible = "allwinner,sun8i-a83t-pwm", "allwinner,sun8i-h3-pwm"; reg = <0x01c21400 0x400>; clocks = <&osc24M>; #pwm-cells = <3>; status = "disabled"; }; uart0: serial@1c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART0>; resets = <&ccu RST_BUS_UART0>; status = "disabled"; }; uart1: serial@1c28400 { compatible = "snps,dw-apb-uart"; reg = <0x01c28400 0x400>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART1>; resets = <&ccu RST_BUS_UART1>; status = "disabled"; }; uart2: serial@1c28800 { compatible = "snps,dw-apb-uart"; reg = <0x01c28800 0x400>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART2>; resets = <&ccu RST_BUS_UART2>; status = "disabled"; }; uart3: serial@1c28c00 { compatible = "snps,dw-apb-uart"; reg = <0x01c28c00 0x400>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART3>; resets = <&ccu RST_BUS_UART3>; status = "disabled"; }; uart4: serial@1c29000 { compatible = "snps,dw-apb-uart"; reg = <0x01c29000 0x400>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART4>; resets = <&ccu RST_BUS_UART4>; status = "disabled"; }; i2c0: i2c@1c2ac00 { compatible = "allwinner,sun8i-a83t-i2c", "allwinner,sun6i-a31-i2c"; reg = <0x01c2ac00 0x400>; interrupts = ; clocks = <&ccu CLK_BUS_I2C0>; resets = <&ccu RST_BUS_I2C0>; pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; i2c1: i2c@1c2b000 { compatible = "allwinner,sun8i-a83t-i2c", "allwinner,sun6i-a31-i2c"; reg = <0x01c2b000 0x400>; interrupts = ; clocks = <&ccu CLK_BUS_I2C1>; resets = <&ccu RST_BUS_I2C1>; pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; i2c2: i2c@1c2b400 { compatible = "allwinner,sun8i-a83t-i2c", "allwinner,sun6i-a31-i2c"; reg = <0x01c2b400 0x400>; interrupts = ; clocks = <&ccu CLK_BUS_I2C2>; resets = <&ccu RST_BUS_I2C2>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; emac: ethernet@1c30000 { compatible = "allwinner,sun8i-a83t-emac"; syscon = <&syscon>; reg = <0x01c30000 0x104>; interrupts = ; interrupt-names = "macirq"; resets = <&ccu 13>; reset-names = "stmmaceth"; clocks = <&ccu 27>; clock-names = "stmmaceth"; status = "disabled"; mdio: mdio { compatible = "snps,dwmac-mdio"; #address-cells = <1>; #size-cells = <0>; }; }; gic: interrupt-controller@1c81000 { compatible = "arm,gic-400"; reg = <0x01c81000 0x1000>, <0x01c82000 0x2000>, <0x01c84000 0x2000>, <0x01c86000 0x2000>; interrupt-controller; #interrupt-cells = <3>; interrupts = ; }; csi: camera@1cb0000 { compatible = "allwinner,sun8i-a83t-csi"; reg = <0x01cb0000 0x1000>; interrupts = ; clocks = <&ccu CLK_BUS_CSI>, <&ccu CLK_CSI_SCLK>, <&ccu CLK_DRAM_CSI>; clock-names = "bus", "mod", "ram"; resets = <&ccu RST_BUS_CSI>; status = "disabled"; csi_in: port { }; }; hdmi: hdmi@1ee0000 { compatible = "allwinner,sun8i-a83t-dw-hdmi"; reg = <0x01ee0000 0x10000>; reg-io-width = <1>; interrupts = ; clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>, <&ccu CLK_HDMI>; clock-names = "iahb", "isfr", "tmds"; resets = <&ccu RST_BUS_HDMI1>; reset-names = "ctrl"; phys = <&hdmi_phy>; phy-names = "hdmi-phy"; pinctrl-names = "default"; pinctrl-0 = <&hdmi_pins>; status = "disabled"; ports { #address-cells = <1>; #size-cells = <0>; hdmi_in: port@0 { reg = <0>; hdmi_in_tcon1: endpoint { remote-endpoint = <&tcon1_out_hdmi>; }; }; hdmi_out: port@1 { reg = <1>; }; }; }; hdmi_phy: hdmi-phy@1ef0000 { compatible = "allwinner,sun8i-a83t-hdmi-phy"; reg = <0x01ef0000 0x10000>; clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>; clock-names = "bus", "mod"; resets = <&ccu RST_BUS_HDMI0>; reset-names = "phy"; #phy-cells = <0>; }; r_intc: interrupt-controller@1f00c00 { compatible = "allwinner,sun8i-a83t-r-intc", "allwinner,sun6i-a31-r-intc"; interrupt-controller; #interrupt-cells = <2>; reg = <0x01f00c00 0x400>; interrupts = ; }; r_ccu: clock@1f01400 { compatible = "allwinner,sun8i-a83t-r-ccu"; reg = <0x01f01400 0x400>; clocks = <&osc24M>, <&osc16Md512>, <&osc16M>, <&ccu 6>; clock-names = "hosc", "losc", "iosc", "pll-periph"; #clock-cells = <1>; #reset-cells = <1>; }; r_cpucfg@1f01c00 { compatible = "allwinner,sun8i-a83t-r-cpucfg"; reg = <0x1f01c00 0x400>; }; r_cir: ir@1f02000 { compatible = "allwinner,sun8i-a83t-ir", "allwinner,sun5i-a13-ir"; clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>; clock-names = "apb", "ir"; resets = <&r_ccu RST_APB0_IR>; interrupts = ; reg = <0x01f02000 0x400>; pinctrl-names = "default"; pinctrl-0 = <&r_cir_pin>; status = "disabled"; }; r_lradc: lradc@1f03c00 { compatible = "allwinner,sun8i-a83t-r-lradc"; reg = <0x01f03c00 0x100>; interrupts = ; status = "disabled"; }; r_pio: pinctrl@1f02c00 { compatible = "allwinner,sun8i-a83t-r-pinctrl"; reg = <0x01f02c00 0x400>; interrupts = ; clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, <&osc16Md512>; clock-names = "apb", "hosc", "losc"; gpio-controller; #gpio-cells = <3>; interrupt-controller; #interrupt-cells = <3>; r_cir_pin: r-cir-pin { pins = "PL12"; function = "s_cir_rx"; }; r_rsb_pins: r-rsb-pins { pins = "PL0", "PL1"; function = "s_rsb"; drive-strength = <20>; bias-pull-up; }; }; r_rsb: rsb@1f03400 { compatible = "allwinner,sun8i-a83t-rsb", "allwinner,sun8i-a23-rsb"; reg = <0x01f03400 0x400>; interrupts = ; clocks = <&r_ccu CLK_APB0_RSB>; clock-frequency = <3000000>; resets = <&r_ccu RST_APB0_RSB>; pinctrl-names = "default"; pinctrl-0 = <&r_rsb_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; }; };