/* * Copyright 2013 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. */ /dts-v1/; #include "vf610.dtsi" / { model = "VF610 Tower Board"; compatible = "fsl,vf610-twr", "fsl,vf610"; chosen { bootargs = "console=ttyLP1,115200"; }; memory { reg = <0x80000000 0x8000000>; }; audio_ext: mclk_osc { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <24576000>; }; enet_ext: eth_osc { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; }; regulators { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <0>; reg_3p3v: regulator@0 { compatible = "regulator-fixed"; reg = <0>; regulator-name = "3P3V"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; reg_vcc_3v3_mcu: regulator@1 { compatible = "regulator-fixed"; reg = <1>; regulator-name = "vcc_3v3_mcu"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; }; sound { compatible = "simple-audio-card"; simple-audio-card,format = "i2s"; simple-audio-card,widgets = "Microphone", "Microphone Jack", "Headphone", "Headphone Jack", "Speaker", "Speaker Ext", "Line", "Line In Jack"; simple-audio-card,routing = "MIC_IN", "Microphone Jack", "Microphone Jack", "Mic Bias", "LINE_IN", "Line In Jack", "Headphone Jack", "HP_OUT", "Speaker Ext", "LINE_OUT"; simple-audio-card,cpu { sound-dai = <&sai2>; frame-master; bitclock-master; }; simple-audio-card,codec { sound-dai = <&codec>; frame-master; bitclock-master; }; }; }; &adc0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_adc0_ad5>; vref-supply = <®_vcc_3v3_mcu>; status = "okay"; }; &clks { clocks = <&sxosc>, <&fxosc>, <&enet_ext>, <&audio_ext>; clock-names = "sxosc", "fxosc", "enet_ext", "audio_ext"; }; &dspi0 { bus-num = <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dspi0>; status = "okay"; sflash: at26df081a@0 { #address-cells = <1>; #size-cells = <1>; compatible = "atmel,at26df081a"; spi-max-frequency = <16000000>; spi-cpol; spi-cpha; reg = <0>; }; }; &edma0 { status = "okay"; }; &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; bus-width = <4>; cd-gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; status = "okay"; }; &fec0 { phy-mode = "rmii"; phy-handle = <ðphy0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec0>; status = "okay"; mdio { #address-cells = <1>; #size-cells = <0>; ethphy0: ethernet-phy@0 { reg = <0>; }; ethphy1: ethernet-phy@1 { reg = <1>; }; }; }; &fec1 { phy-mode = "rmii"; phy-handle = <ðphy1>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec1>; status = "okay"; }; &i2c0 { clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; status = "okay"; codec: sgtl5000@0a { #sound-dai-cells = <0>; compatible = "fsl,sgtl5000"; reg = <0x0a>; VDDA-supply = <®_3p3v>; VDDIO-supply = <®_3p3v>; clocks = <&clks VF610_CLK_SAI2>; }; }; &iomuxc { vf610-twr { pinctrl_adc0_ad5: adc0ad5grp { fsl,pins = < VF610_PAD_PTC30__ADC0_SE5 0xa1 >; }; pinctrl_dspi0: dspi0grp { fsl,pins = < VF610_PAD_PTB19__DSPI0_CS0 0x1182 VF610_PAD_PTB20__DSPI0_SIN 0x1181 VF610_PAD_PTB21__DSPI0_SOUT 0x1182 VF610_PAD_PTB22__DSPI0_SCK 0x1182 >; }; pinctrl_esdhc1: esdhc1grp { fsl,pins = < VF610_PAD_PTA24__ESDHC1_CLK 0x31ef VF610_PAD_PTA25__ESDHC1_CMD 0x31ef VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef VF610_PAD_PTA7__GPIO_134 0x219d >; }; pinctrl_fec0: fec0grp { fsl,pins = < VF610_PAD_PTA6__RMII_CLKIN 0x30d1 VF610_PAD_PTC0__ENET_RMII0_MDC 0x30d3 VF610_PAD_PTC1__ENET_RMII0_MDIO 0x30d1 VF610_PAD_PTC2__ENET_RMII0_CRS 0x30d1 VF610_PAD_PTC3__ENET_RMII0_RXD1 0x30d1 VF610_PAD_PTC4__ENET_RMII0_RXD0 0x30d1 VF610_PAD_PTC5__ENET_RMII0_RXER 0x30d1 VF610_PAD_PTC6__ENET_RMII0_TXD1 0x30d2 VF610_PAD_PTC7__ENET_RMII0_TXD0 0x30d2 VF610_PAD_PTC8__ENET_RMII0_TXEN 0x30d2 >; }; pinctrl_fec1: fec1grp { fsl,pins = < VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1 VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 >; }; pinctrl_i2c0: i2c0grp { fsl,pins = < VF610_PAD_PTB14__I2C0_SCL 0x30d3 VF610_PAD_PTB15__I2C0_SDA 0x30d3 >; }; pinctrl_pwm0: pwm0grp { fsl,pins = < VF610_PAD_PTB0__FTM0_CH0 0x1582 VF610_PAD_PTB1__FTM0_CH1 0x1582 VF610_PAD_PTB2__FTM0_CH2 0x1582 VF610_PAD_PTB3__FTM0_CH3 0x1582 >; }; pinctrl_sai2: sai2grp { fsl,pins = < VF610_PAD_PTA16__SAI2_TX_BCLK 0x02ed VF610_PAD_PTA18__SAI2_TX_DATA 0x02ee VF610_PAD_PTA19__SAI2_TX_SYNC 0x02ed VF610_PAD_PTA21__SAI2_RX_BCLK 0x02ed VF610_PAD_PTA22__SAI2_RX_DATA 0x02ed VF610_PAD_PTA23__SAI2_RX_SYNC 0x02ed VF610_PAD_PTB18__EXT_AUDIO_MCLK 0x02ed >; }; pinctrl_uart1: uart1grp { fsl,pins = < VF610_PAD_PTB4__UART1_TX 0x21a2 VF610_PAD_PTB5__UART1_RX 0x21a1 >; }; pinctrl_uart2: uart2grp { fsl,pins = < VF610_PAD_PTB6__UART2_TX 0x21a2 VF610_PAD_PTB7__UART2_RX 0x21a1 >; }; }; }; &pwm0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm0>; status = "okay"; }; &sai2 { #sound-dai-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sai2>; status = "okay"; }; &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; status = "okay"; }; &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; status = "okay"; }; &usbdev0 { disable-over-current; status = "okay"; }; &usbh1 { disable-over-current; status = "okay"; }; &usbmisc0 { status = "okay"; }; &usbmisc1 { status = "okay"; }; &usbphy0 { status = "okay"; }; &usbphy1 { status = "okay"; };