// SPDX-License-Identifier: (GPL-2.0+ OR MIT) // Copyright (C) 2020 Arm Ltd. // based on the H6 dtsi, which is: // Copyright (C) 2017 Icenowy Zheng #include #include #include #include #include #include / { interrupt-parent = <&gic>; #address-cells = <2>; #size-cells = <2>; cpus { #address-cells = <1>; #size-cells = <0>; cpu0: cpu@0 { compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0>; enable-method = "psci"; clocks = <&ccu CLK_CPUX>; }; cpu1: cpu@1 { compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <1>; enable-method = "psci"; clocks = <&ccu CLK_CPUX>; }; cpu2: cpu@2 { compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <2>; enable-method = "psci"; clocks = <&ccu CLK_CPUX>; }; cpu3: cpu@3 { compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <3>; enable-method = "psci"; clocks = <&ccu CLK_CPUX>; }; }; reserved-memory { #address-cells = <2>; #size-cells = <2>; ranges; /* * 256 KiB reserved for Trusted Firmware-A (BL31). * This is added by BL31 itself, but some bootloaders fail * to propagate this into the DTB handed to kernels. */ secmon@40000000 { reg = <0x0 0x40000000 0x0 0x40000>; no-map; }; }; osc24M: osc24M-clk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; clock-output-names = "osc24M"; }; pmu { compatible = "arm,cortex-a53-pmu"; interrupts = , , , ; interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; }; psci { compatible = "arm,psci-0.2"; method = "smc"; }; timer { compatible = "arm,armv8-timer"; arm,no-tick-in-suspend; interrupts = , , , ; }; soc { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x0 0x0 0x40000000>; syscon: syscon@3000000 { compatible = "allwinner,sun50i-h616-system-control"; reg = <0x03000000 0x1000>; #address-cells = <1>; #size-cells = <1>; ranges; sram_c: sram@28000 { compatible = "mmio-sram"; reg = <0x00028000 0x30000>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x00028000 0x30000>; }; }; ccu: clock@3001000 { compatible = "allwinner,sun50i-h616-ccu"; reg = <0x03001000 0x1000>; clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>; clock-names = "hosc", "losc", "iosc"; #clock-cells = <1>; #reset-cells = <1>; }; watchdog: watchdog@30090a0 { compatible = "allwinner,sun50i-h616-wdt", "allwinner,sun6i-a31-wdt"; reg = <0x030090a0 0x20>; interrupts = ; clocks = <&osc24M>; }; pio: pinctrl@300b000 { compatible = "allwinner,sun50i-h616-pinctrl"; reg = <0x0300b000 0x400>; interrupts = , , , , , , , ; clocks = <&ccu CLK_APB1>, <&osc24M>, <&rtc CLK_OSC32K>; clock-names = "apb", "hosc", "losc"; gpio-controller; #gpio-cells = <3>; interrupt-controller; #interrupt-cells = <3>; ext_rgmii_pins: rgmii-pins { pins = "PI0", "PI1", "PI2", "PI3", "PI4", "PI5", "PI7", "PI8", "PI9", "PI10", "PI11", "PI12", "PI13", "PI14", "PI15", "PI16"; function = "emac0"; drive-strength = <40>; }; i2c0_pins: i2c0-pins { pins = "PI6", "PI7"; function = "i2c0"; }; i2c3_ph_pins: i2c3-ph-pins { pins = "PH4", "PH5"; function = "i2c3"; }; ir_rx_pin: ir-rx-pin { pins = "PH10"; function = "ir_rx"; }; mmc0_pins: mmc0-pins { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; function = "mmc0"; drive-strength = <30>; bias-pull-up; }; /omit-if-no-ref/ mmc1_pins: mmc1-pins { pins = "PG0", "PG1", "PG2", "PG3", "PG4", "PG5"; function = "mmc1"; drive-strength = <30>; bias-pull-up; }; mmc2_pins: mmc2-pins { pins = "PC0", "PC1", "PC5", "PC6", "PC8", "PC9", "PC10", "PC11", "PC13", "PC14", "PC15", "PC16"; function = "mmc2"; drive-strength = <30>; bias-pull-up; }; /omit-if-no-ref/ spi0_pins: spi0-pins { pins = "PC0", "PC2", "PC4"; function = "spi0"; }; /omit-if-no-ref/ spi0_cs0_pin: spi0-cs0-pin { pins = "PC3"; function = "spi0"; }; /omit-if-no-ref/ spi1_pins: spi1-pins { pins = "PH6", "PH7", "PH8"; function = "spi1"; }; /omit-if-no-ref/ spi1_cs0_pin: spi1-cs0-pin { pins = "PH5"; function = "spi1"; }; uart0_ph_pins: uart0-ph-pins { pins = "PH0", "PH1"; function = "uart0"; }; /omit-if-no-ref/ uart1_pins: uart1-pins { pins = "PG6", "PG7"; function = "uart1"; }; /omit-if-no-ref/ uart1_rts_cts_pins: uart1-rts-cts-pins { pins = "PG8", "PG9"; function = "uart1"; }; }; gic: interrupt-controller@3021000 { compatible = "arm,gic-400"; reg = <0x03021000 0x1000>, <0x03022000 0x2000>, <0x03024000 0x2000>, <0x03026000 0x2000>; interrupts = ; interrupt-controller; #interrupt-cells = <3>; }; mmc0: mmc@4020000 { compatible = "allwinner,sun50i-h616-mmc", "allwinner,sun50i-a100-mmc"; reg = <0x04020000 0x1000>; clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>; clock-names = "ahb", "mmc"; resets = <&ccu RST_BUS_MMC0>; reset-names = "ahb"; interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; status = "disabled"; max-frequency = <150000000>; cap-sd-highspeed; cap-mmc-highspeed; mmc-ddr-3_3v; cap-sdio-irq; #address-cells = <1>; #size-cells = <0>; }; mmc1: mmc@4021000 { compatible = "allwinner,sun50i-h616-mmc", "allwinner,sun50i-a100-mmc"; reg = <0x04021000 0x1000>; clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>; clock-names = "ahb", "mmc"; resets = <&ccu RST_BUS_MMC1>; reset-names = "ahb"; interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; status = "disabled"; max-frequency = <150000000>; cap-sd-highspeed; cap-mmc-highspeed; mmc-ddr-3_3v; cap-sdio-irq; #address-cells = <1>; #size-cells = <0>; }; mmc2: mmc@4022000 { compatible = "allwinner,sun50i-h616-emmc", "allwinner,sun50i-a100-emmc"; reg = <0x04022000 0x1000>; clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>; clock-names = "ahb", "mmc"; resets = <&ccu RST_BUS_MMC2>; reset-names = "ahb"; interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins>; status = "disabled"; max-frequency = <150000000>; cap-sd-highspeed; cap-mmc-highspeed; mmc-ddr-3_3v; cap-sdio-irq; #address-cells = <1>; #size-cells = <0>; }; uart0: serial@5000000 { compatible = "snps,dw-apb-uart"; reg = <0x05000000 0x400>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART0>; resets = <&ccu RST_BUS_UART0>; status = "disabled"; }; uart1: serial@5000400 { compatible = "snps,dw-apb-uart"; reg = <0x05000400 0x400>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART1>; resets = <&ccu RST_BUS_UART1>; status = "disabled"; }; uart2: serial@5000800 { compatible = "snps,dw-apb-uart"; reg = <0x05000800 0x400>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART2>; resets = <&ccu RST_BUS_UART2>; status = "disabled"; }; uart3: serial@5000c00 { compatible = "snps,dw-apb-uart"; reg = <0x05000c00 0x400>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART3>; resets = <&ccu RST_BUS_UART3>; status = "disabled"; }; uart4: serial@5001000 { compatible = "snps,dw-apb-uart"; reg = <0x05001000 0x400>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART4>; resets = <&ccu RST_BUS_UART4>; status = "disabled"; }; uart5: serial@5001400 { compatible = "snps,dw-apb-uart"; reg = <0x05001400 0x400>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART5>; resets = <&ccu RST_BUS_UART5>; status = "disabled"; }; i2c0: i2c@5002000 { compatible = "allwinner,sun50i-h616-i2c", "allwinner,sun8i-v536-i2c", "allwinner,sun6i-a31-i2c"; reg = <0x05002000 0x400>; interrupts = ; clocks = <&ccu CLK_BUS_I2C0>; resets = <&ccu RST_BUS_I2C0>; pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; i2c1: i2c@5002400 { compatible = "allwinner,sun50i-h616-i2c", "allwinner,sun8i-v536-i2c", "allwinner,sun6i-a31-i2c"; reg = <0x05002400 0x400>; interrupts = ; clocks = <&ccu CLK_BUS_I2C1>; resets = <&ccu RST_BUS_I2C1>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; i2c2: i2c@5002800 { compatible = "allwinner,sun50i-h616-i2c", "allwinner,sun8i-v536-i2c", "allwinner,sun6i-a31-i2c"; reg = <0x05002800 0x400>; interrupts = ; clocks = <&ccu CLK_BUS_I2C2>; resets = <&ccu RST_BUS_I2C2>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; i2c3: i2c@5002c00 { compatible = "allwinner,sun50i-h616-i2c", "allwinner,sun8i-v536-i2c", "allwinner,sun6i-a31-i2c"; reg = <0x05002c00 0x400>; interrupts = ; clocks = <&ccu CLK_BUS_I2C3>; resets = <&ccu RST_BUS_I2C3>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; i2c4: i2c@5003000 { compatible = "allwinner,sun50i-h616-i2c", "allwinner,sun8i-v536-i2c", "allwinner,sun6i-a31-i2c"; reg = <0x05003000 0x400>; interrupts = ; clocks = <&ccu CLK_BUS_I2C4>; resets = <&ccu RST_BUS_I2C4>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; spi0: spi@5010000 { compatible = "allwinner,sun50i-h616-spi", "allwinner,sun8i-h3-spi"; reg = <0x05010000 0x1000>; interrupts = ; clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>; clock-names = "ahb", "mod"; resets = <&ccu RST_BUS_SPI0>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; spi1: spi@5011000 { compatible = "allwinner,sun50i-h616-spi", "allwinner,sun8i-h3-spi"; reg = <0x05011000 0x1000>; interrupts = ; clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>; clock-names = "ahb", "mod"; resets = <&ccu RST_BUS_SPI1>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; emac0: ethernet@5020000 { compatible = "allwinner,sun50i-h616-emac0", "allwinner,sun50i-a64-emac"; reg = <0x05020000 0x10000>; interrupts = ; interrupt-names = "macirq"; clocks = <&ccu CLK_BUS_EMAC0>; clock-names = "stmmaceth"; resets = <&ccu RST_BUS_EMAC0>; reset-names = "stmmaceth"; syscon = <&syscon>; status = "disabled"; mdio0: mdio { compatible = "snps,dwmac-mdio"; #address-cells = <1>; #size-cells = <0>; }; }; rtc: rtc@7000000 { compatible = "allwinner,sun50i-h616-rtc"; reg = <0x07000000 0x400>; interrupts = ; clocks = <&r_ccu CLK_R_APB1_RTC>, <&osc24M>, <&ccu CLK_PLL_SYSTEM_32K>; clock-names = "bus", "hosc", "pll-32k"; #clock-cells = <1>; }; r_ccu: clock@7010000 { compatible = "allwinner,sun50i-h616-r-ccu"; reg = <0x07010000 0x210>; clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>, <&ccu CLK_PLL_PERIPH0>; clock-names = "hosc", "losc", "iosc", "pll-periph"; #clock-cells = <1>; #reset-cells = <1>; }; r_pio: pinctrl@7022000 { compatible = "allwinner,sun50i-h616-r-pinctrl"; reg = <0x07022000 0x400>; clocks = <&r_ccu CLK_R_APB1>, <&osc24M>, <&rtc CLK_OSC32K>; clock-names = "apb", "hosc", "losc"; gpio-controller; #gpio-cells = <3>; /omit-if-no-ref/ r_i2c_pins: r-i2c-pins { pins = "PL0", "PL1"; function = "s_i2c"; }; r_rsb_pins: r-rsb-pins { pins = "PL0", "PL1"; function = "s_rsb"; }; }; ir: ir@7040000 { compatible = "allwinner,sun50i-h616-ir", "allwinner,sun6i-a31-ir"; reg = <0x07040000 0x400>; interrupts = ; clocks = <&r_ccu CLK_R_APB1_IR>, <&r_ccu CLK_IR>; clock-names = "apb", "ir"; resets = <&r_ccu RST_R_APB1_IR>; pinctrl-names = "default"; pinctrl-0 = <&ir_rx_pin>; status = "disabled"; }; r_i2c: i2c@7081400 { compatible = "allwinner,sun50i-h616-i2c", "allwinner,sun8i-v536-i2c", "allwinner,sun6i-a31-i2c"; reg = <0x07081400 0x400>; interrupts = ; clocks = <&r_ccu CLK_R_APB2_I2C>; resets = <&r_ccu RST_R_APB2_I2C>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; r_rsb: rsb@7083000 { compatible = "allwinner,sun50i-h616-rsb", "allwinner,sun8i-a23-rsb"; reg = <0x07083000 0x400>; interrupts = ; clocks = <&r_ccu CLK_R_APB2_RSB>; clock-frequency = <3000000>; resets = <&r_ccu RST_R_APB2_RSB>; pinctrl-names = "default"; pinctrl-0 = <&r_rsb_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; }; };