// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2018 Amlogic, Inc. All rights reserved. */ #include #include #include #include #include #include #include #include / { interrupt-parent = <&gic>; #address-cells = <2>; #size-cells = <2>; chosen { #address-cells = <2>; #size-cells = <2>; ranges; simplefb_cvbs: framebuffer-cvbs { compatible = "amlogic,simple-framebuffer", "simple-framebuffer"; amlogic,pipeline = "vpu-cvbs"; clocks = <&clkc CLKID_HDMI>, <&clkc CLKID_HTX_PCLK>, <&clkc CLKID_VPU_INTR>; status = "disabled"; }; simplefb_hdmi: framebuffer-hdmi { compatible = "amlogic,simple-framebuffer", "simple-framebuffer"; amlogic,pipeline = "vpu-hdmi"; clocks = <&clkc CLKID_HDMI>, <&clkc CLKID_HTX_PCLK>, <&clkc CLKID_VPU_INTR>; status = "disabled"; }; }; efuse: efuse { compatible = "amlogic,meson-gxbb-efuse"; clocks = <&clkc CLKID_EFUSE>; #address-cells = <1>; #size-cells = <1>; read-only; secure-monitor = <&sm>; }; gpu_opp_table: gpu-opp-table { compatible = "operating-points-v2"; opp-124999998 { opp-hz = /bits/ 64 <124999998>; opp-microvolt = <800000>; }; opp-249999996 { opp-hz = /bits/ 64 <249999996>; opp-microvolt = <800000>; }; opp-285714281 { opp-hz = /bits/ 64 <285714281>; opp-microvolt = <800000>; }; opp-399999994 { opp-hz = /bits/ 64 <399999994>; opp-microvolt = <800000>; }; opp-499999992 { opp-hz = /bits/ 64 <499999992>; opp-microvolt = <800000>; }; opp-666666656 { opp-hz = /bits/ 64 <666666656>; opp-microvolt = <800000>; }; opp-799999987 { opp-hz = /bits/ 64 <799999987>; opp-microvolt = <800000>; }; }; psci { compatible = "arm,psci-1.0"; method = "smc"; }; reserved-memory { #address-cells = <2>; #size-cells = <2>; ranges; /* 3 MiB reserved for ARM Trusted Firmware (BL31) */ secmon_reserved: secmon@5000000 { reg = <0x0 0x05000000 0x0 0x300000>; no-map; }; linux,cma { compatible = "shared-dma-pool"; reusable; size = <0x0 0x10000000>; alignment = <0x0 0x400000>; linux,cma-default; }; }; sm: secure-monitor { compatible = "amlogic,meson-gxbb-sm"; }; soc { compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; ranges; pcie: pcie@fc000000 { compatible = "amlogic,g12a-pcie", "snps,dw-pcie"; reg = <0x0 0xfc000000 0x0 0x400000 0x0 0xff648000 0x0 0x2000 0x0 0xfc400000 0x0 0x200000>; reg-names = "elbi", "cfg", "config"; interrupts = ; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &gic GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; bus-range = <0x0 0xff>; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; ranges = <0x81000000 0 0 0x0 0xfc600000 0 0x00100000 0x82000000 0 0xfc700000 0x0 0xfc700000 0 0x1900000>; clocks = <&clkc CLKID_PCIE_PHY &clkc CLKID_PCIE_COMB &clkc CLKID_PCIE_PLL>; clock-names = "general", "pclk", "port"; resets = <&reset RESET_PCIE_CTRL_A>, <&reset RESET_PCIE_APB>; reset-names = "port", "apb"; num-lanes = <1>; phys = <&usb3_pcie_phy PHY_TYPE_PCIE>; phy-names = "pcie"; status = "disabled"; }; thermal-zones { cpu_thermal: cpu-thermal { polling-delay = <1000>; polling-delay-passive = <100>; thermal-sensors = <&cpu_temp>; trips { cpu_passive: cpu-passive { temperature = <85000>; /* millicelsius */ hysteresis = <2000>; /* millicelsius */ type = "passive"; }; cpu_hot: cpu-hot { temperature = <95000>; /* millicelsius */ hysteresis = <2000>; /* millicelsius */ type = "hot"; }; cpu_critical: cpu-critical { temperature = <110000>; /* millicelsius */ hysteresis = <2000>; /* millicelsius */ type = "critical"; }; }; }; ddr_thermal: ddr-thermal { polling-delay = <1000>; polling-delay-passive = <100>; thermal-sensors = <&ddr_temp>; trips { ddr_passive: ddr-passive { temperature = <85000>; /* millicelsius */ hysteresis = <2000>; /* millicelsius */ type = "passive"; }; ddr_critical: ddr-critical { temperature = <110000>; /* millicelsius */ hysteresis = <2000>; /* millicelsius */ type = "critical"; }; }; cooling-maps { map { trip = <&ddr_passive>; cooling-device = <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; }; ethmac: ethernet@ff3f0000 { compatible = "amlogic,meson-g12a-dwmac", "snps,dwmac-3.70a", "snps,dwmac"; reg = <0x0 0xff3f0000 0x0 0x10000>, <0x0 0xff634540 0x0 0x8>; interrupts = ; interrupt-names = "macirq"; clocks = <&clkc CLKID_ETH>, <&clkc CLKID_FCLK_DIV2>, <&clkc CLKID_MPLL2>, <&clkc CLKID_FCLK_DIV2>; clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment"; rx-fifo-depth = <4096>; tx-fifo-depth = <2048>; resets = <&reset RESET_ETHERNET>; reset-names = "stmmaceth"; status = "disabled"; mdio0: mdio { #address-cells = <1>; #size-cells = <0>; compatible = "snps,dwmac-mdio"; }; }; apb: bus@ff600000 { compatible = "simple-bus"; reg = <0x0 0xff600000 0x0 0x200000>; #address-cells = <2>; #size-cells = <2>; ranges = <0x0 0x0 0x0 0xff600000 0x0 0x200000>; hdmi_tx: hdmi-tx@0 { compatible = "amlogic,meson-g12a-dw-hdmi"; reg = <0x0 0x0 0x0 0x10000>; interrupts = ; resets = <&reset RESET_HDMITX_CAPB3>, <&reset RESET_HDMITX_PHY>, <&reset RESET_HDMITX>; reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy"; clocks = <&clkc CLKID_HDMI>, <&clkc CLKID_HTX_PCLK>, <&clkc CLKID_VPU_INTR>; clock-names = "isfr", "iahb", "venci"; #address-cells = <1>; #size-cells = <0>; #sound-dai-cells = <0>; status = "disabled"; /* VPU VENC Input */ hdmi_tx_venc_port: port@0 { reg = <0>; hdmi_tx_in: endpoint { remote-endpoint = <&hdmi_tx_out>; }; }; /* TMDS Output */ hdmi_tx_tmds_port: port@1 { reg = <1>; }; }; apb_efuse: bus@30000 { compatible = "simple-bus"; reg = <0x0 0x30000 0x0 0x2000>; #address-cells = <2>; #size-cells = <2>; ranges = <0x0 0x0 0x0 0x30000 0x0 0x2000>; hwrng: rng@218 { compatible = "amlogic,meson-rng"; reg = <0x0 0x218 0x0 0x4>; clocks = <&clkc CLKID_RNG0>; clock-names = "core"; }; }; acodec: audio-controller@32000 { compatible = "amlogic,t9015"; reg = <0x0 0x32000 0x0 0x14>; #sound-dai-cells = <0>; sound-name-prefix = "ACODEC"; clocks = <&clkc CLKID_AUDIO_CODEC>; clock-names = "pclk"; resets = <&reset RESET_AUDIO_CODEC>; status = "disabled"; }; periphs: bus@34400 { compatible = "simple-bus"; reg = <0x0 0x34400 0x0 0x400>; #address-cells = <2>; #size-cells = <2>; ranges = <0x0 0x0 0x0 0x34400 0x0 0x400>; periphs_pinctrl: pinctrl@40 { compatible = "amlogic,meson-g12a-periphs-pinctrl"; #address-cells = <2>; #size-cells = <2>; ranges; gpio: bank@40 { reg = <0x0 0x40 0x0 0x4c>, <0x0 0xe8 0x0 0x18>, <0x0 0x120 0x0 0x18>, <0x0 0x2c0 0x0 0x40>, <0x0 0x340 0x0 0x1c>; reg-names = "gpio", "pull", "pull-enable", "mux", "ds"; gpio-controller; #gpio-cells = <2>; gpio-ranges = <&periphs_pinctrl 0 0 86>; }; cec_ao_a_h_pins: cec_ao_a_h { mux { groups = "cec_ao_a_h"; function = "cec_ao_a_h"; bias-disable; }; }; cec_ao_b_h_pins: cec_ao_b_h { mux { groups = "cec_ao_b_h"; function = "cec_ao_b_h"; bias-disable; }; }; emmc_ctrl_pins: emmc-ctrl { mux-0 { groups = "emmc_cmd"; function = "emmc"; bias-pull-up; drive-strength-microamp = <4000>; }; mux-1 { groups = "emmc_clk"; function = "emmc"; bias-disable; drive-strength-microamp = <4000>; }; }; emmc_data_4b_pins: emmc-data-4b { mux-0 { groups = "emmc_nand_d0", "emmc_nand_d1", "emmc_nand_d2", "emmc_nand_d3"; function = "emmc"; bias-pull-up; drive-strength-microamp = <4000>; }; }; emmc_data_8b_pins: emmc-data-8b { mux-0 { groups = "emmc_nand_d0", "emmc_nand_d1", "emmc_nand_d2", "emmc_nand_d3", "emmc_nand_d4", "emmc_nand_d5", "emmc_nand_d6", "emmc_nand_d7"; function = "emmc"; bias-pull-up; drive-strength-microamp = <4000>; }; }; emmc_ds_pins: emmc-ds { mux { groups = "emmc_nand_ds"; function = "emmc"; bias-pull-down; drive-strength-microamp = <4000>; }; }; emmc_clk_gate_pins: emmc_clk_gate { mux { groups = "BOOT_8"; function = "gpio_periphs"; bias-pull-down; drive-strength-microamp = <4000>; }; }; hdmitx_ddc_pins: hdmitx_ddc { mux { groups = "hdmitx_sda", "hdmitx_sck"; function = "hdmitx"; bias-disable; drive-strength-microamp = <4000>; }; }; hdmitx_hpd_pins: hdmitx_hpd { mux { groups = "hdmitx_hpd_in"; function = "hdmitx"; bias-disable; }; }; i2c0_sda_c_pins: i2c0-sda-c { mux { groups = "i2c0_sda_c"; function = "i2c0"; bias-disable; drive-strength-microamp = <3000>; }; }; i2c0_sck_c_pins: i2c0-sck-c { mux { groups = "i2c0_sck_c"; function = "i2c0"; bias-disable; drive-strength-microamp = <3000>; }; }; i2c0_sda_z0_pins: i2c0-sda-z0 { mux { groups = "i2c0_sda_z0"; function = "i2c0"; bias-disable; drive-strength-microamp = <3000>; }; }; i2c0_sck_z1_pins: i2c0-sck-z1 { mux { groups = "i2c0_sck_z1"; function = "i2c0"; bias-disable; drive-strength-microamp = <3000>; }; }; i2c0_sda_z7_pins: i2c0-sda-z7 { mux { groups = "i2c0_sda_z7"; function = "i2c0"; bias-disable; drive-strength-microamp = <3000>; }; }; i2c0_sda_z8_pins: i2c0-sda-z8 { mux { groups = "i2c0_sda_z8"; function = "i2c0"; bias-disable; drive-strength-microamp = <3000>; }; }; i2c1_sda_x_pins: i2c1-sda-x { mux { groups = "i2c1_sda_x"; function = "i2c1"; bias-disable; drive-strength-microamp = <3000>; }; }; i2c1_sck_x_pins: i2c1-sck-x { mux { groups = "i2c1_sck_x"; function = "i2c1"; bias-disable; drive-strength-microamp = <3000>; }; }; i2c1_sda_h2_pins: i2c1-sda-h2 { mux { groups = "i2c1_sda_h2"; function = "i2c1"; bias-disable; drive-strength-microamp = <3000>; }; }; i2c1_sck_h3_pins: i2c1-sck-h3 { mux { groups = "i2c1_sck_h3"; function = "i2c1"; bias-disable; drive-strength-microamp = <3000>; }; }; i2c1_sda_h6_pins: i2c1-sda-h6 { mux { groups = "i2c1_sda_h6"; function = "i2c1"; bias-disable; drive-strength-microamp = <3000>; }; }; i2c1_sck_h7_pins: i2c1-sck-h7 { mux { groups = "i2c1_sck_h7"; function = "i2c1"; bias-disable; drive-strength-microamp = <3000>; }; }; i2c2_sda_x_pins: i2c2-sda-x { mux { groups = "i2c2_sda_x"; function = "i2c2"; bias-disable; drive-strength-microamp = <3000>; }; }; i2c2_sck_x_pins: i2c2-sck-x { mux { groups = "i2c2_sck_x"; function = "i2c2"; bias-disable; drive-strength-microamp = <3000>; }; }; i2c2_sda_z_pins: i2c2-sda-z { mux { groups = "i2c2_sda_z"; function = "i2c2"; bias-disable; drive-strength-microamp = <3000>; }; }; i2c2_sck_z_pins: i2c2-sck-z { mux { groups = "i2c2_sck_z"; function = "i2c2"; bias-disable; drive-strength-microamp = <3000>; }; }; i2c3_sda_h_pins: i2c3-sda-h { mux { groups = "i2c3_sda_h"; function = "i2c3"; bias-disable; drive-strength-microamp = <3000>; }; }; i2c3_sck_h_pins: i2c3-sck-h { mux { groups = "i2c3_sck_h"; function = "i2c3"; bias-disable; drive-strength-microamp = <3000>; }; }; i2c3_sda_a_pins: i2c3-sda-a { mux { groups = "i2c3_sda_a"; function = "i2c3"; bias-disable; drive-strength-microamp = <3000>; }; }; i2c3_sck_a_pins: i2c3-sck-a { mux { groups = "i2c3_sck_a"; function = "i2c3"; bias-disable; drive-strength-microamp = <3000>; }; }; mclk0_a_pins: mclk0-a { mux { groups = "mclk0_a"; function = "mclk0"; bias-disable; drive-strength-microamp = <3000>; }; }; mclk1_a_pins: mclk1-a { mux { groups = "mclk1_a"; function = "mclk1"; bias-disable; drive-strength-microamp = <3000>; }; }; mclk1_x_pins: mclk1-x { mux { groups = "mclk1_x"; function = "mclk1"; bias-disable; drive-strength-microamp = <3000>; }; }; mclk1_z_pins: mclk1-z { mux { groups = "mclk1_z"; function = "mclk1"; bias-disable; drive-strength-microamp = <3000>; }; }; nor_pins: nor { mux { groups = "nor_d", "nor_q", "nor_c", "nor_cs"; function = "nor"; bias-disable; }; }; pdm_din0_a_pins: pdm-din0-a { mux { groups = "pdm_din0_a"; function = "pdm"; bias-disable; }; }; pdm_din0_c_pins: pdm-din0-c { mux { groups = "pdm_din0_c"; function = "pdm"; bias-disable; }; }; pdm_din0_x_pins: pdm-din0-x { mux { groups = "pdm_din0_x"; function = "pdm"; bias-disable; }; }; pdm_din0_z_pins: pdm-din0-z { mux { groups = "pdm_din0_z"; function = "pdm"; bias-disable; }; }; pdm_din1_a_pins: pdm-din1-a { mux { groups = "pdm_din1_a"; function = "pdm"; bias-disable; }; }; pdm_din1_c_pins: pdm-din1-c { mux { groups = "pdm_din1_c"; function = "pdm"; bias-disable; }; }; pdm_din1_x_pins: pdm-din1-x { mux { groups = "pdm_din1_x"; function = "pdm"; bias-disable; }; }; pdm_din1_z_pins: pdm-din1-z { mux { groups = "pdm_din1_z"; function = "pdm"; bias-disable; }; }; pdm_din2_a_pins: pdm-din2-a { mux { groups = "pdm_din2_a"; function = "pdm"; bias-disable; }; }; pdm_din2_c_pins: pdm-din2-c { mux { groups = "pdm_din2_c"; function = "pdm"; bias-disable; }; }; pdm_din2_x_pins: pdm-din2-x { mux { groups = "pdm_din2_x"; function = "pdm"; bias-disable; }; }; pdm_din2_z_pins: pdm-din2-z { mux { groups = "pdm_din2_z"; function = "pdm"; bias-disable; }; }; pdm_din3_a_pins: pdm-din3-a { mux { groups = "pdm_din3_a"; function = "pdm"; bias-disable; }; }; pdm_din3_c_pins: pdm-din3-c { mux { groups = "pdm_din3_c"; function = "pdm"; bias-disable; }; }; pdm_din3_x_pins: pdm-din3-x { mux { groups = "pdm_din3_x"; function = "pdm"; bias-disable; }; }; pdm_din3_z_pins: pdm-din3-z { mux { groups = "pdm_din3_z"; function = "pdm"; bias-disable; }; }; pdm_dclk_a_pins: pdm-dclk-a { mux { groups = "pdm_dclk_a"; function = "pdm"; bias-disable; drive-strength-microamp = <500>; }; }; pdm_dclk_c_pins: pdm-dclk-c { mux { groups = "pdm_dclk_c"; function = "pdm"; bias-disable; drive-strength-microamp = <500>; }; }; pdm_dclk_x_pins: pdm-dclk-x { mux { groups = "pdm_dclk_x"; function = "pdm"; bias-disable; drive-strength-microamp = <500>; }; }; pdm_dclk_z_pins: pdm-dclk-z { mux { groups = "pdm_dclk_z"; function = "pdm"; bias-disable; drive-strength-microamp = <500>; }; }; pwm_a_pins: pwm-a { mux { groups = "pwm_a"; function = "pwm_a"; bias-disable; }; }; pwm_b_x7_pins: pwm-b-x7 { mux { groups = "pwm_b_x7"; function = "pwm_b"; bias-disable; }; }; pwm_b_x19_pins: pwm-b-x19 { mux { groups = "pwm_b_x19"; function = "pwm_b"; bias-disable; }; }; pwm_c_c_pins: pwm-c-c { mux { groups = "pwm_c_c"; function = "pwm_c"; bias-disable; }; }; pwm_c_x5_pins: pwm-c-x5 { mux { groups = "pwm_c_x5"; function = "pwm_c"; bias-disable; }; }; pwm_c_x8_pins: pwm-c-x8 { mux { groups = "pwm_c_x8"; function = "pwm_c"; bias-disable; }; }; pwm_d_x3_pins: pwm-d-x3 { mux { groups = "pwm_d_x3"; function = "pwm_d"; bias-disable; }; }; pwm_d_x6_pins: pwm-d-x6 { mux { groups = "pwm_d_x6"; function = "pwm_d"; bias-disable; }; }; pwm_e_pins: pwm-e { mux { groups = "pwm_e"; function = "pwm_e"; bias-disable; }; }; pwm_f_x_pins: pwm-f-x { mux { groups = "pwm_f_x"; function = "pwm_f"; bias-disable; }; }; pwm_f_h_pins: pwm-f-h { mux { groups = "pwm_f_h"; function = "pwm_f"; bias-disable; }; }; sdcard_c_pins: sdcard_c { mux-0 { groups = "sdcard_d0_c", "sdcard_d1_c", "sdcard_d2_c", "sdcard_d3_c", "sdcard_cmd_c"; function = "sdcard"; bias-pull-up; drive-strength-microamp = <4000>; }; mux-1 { groups = "sdcard_clk_c"; function = "sdcard"; bias-disable; drive-strength-microamp = <4000>; }; }; sdcard_clk_gate_c_pins: sdcard_clk_gate_c { mux { groups = "GPIOC_4"; function = "gpio_periphs"; bias-pull-down; drive-strength-microamp = <4000>; }; }; sdcard_z_pins: sdcard_z { mux-0 { groups = "sdcard_d0_z", "sdcard_d1_z", "sdcard_d2_z", "sdcard_d3_z", "sdcard_cmd_z"; function = "sdcard"; bias-pull-up; drive-strength-microamp = <4000>; }; mux-1 { groups = "sdcard_clk_z"; function = "sdcard"; bias-disable; drive-strength-microamp = <4000>; }; }; sdcard_clk_gate_z_pins: sdcard_clk_gate_z { mux { groups = "GPIOZ_6"; function = "gpio_periphs"; bias-pull-down; drive-strength-microamp = <4000>; }; }; sdio_pins: sdio { mux { groups = "sdio_d0", "sdio_d1", "sdio_d2", "sdio_d3", "sdio_clk", "sdio_cmd"; function = "sdio"; bias-disable; drive-strength-microamp = <4000>; }; }; sdio_clk_gate_pins: sdio_clk_gate { mux { groups = "GPIOX_4"; function = "gpio_periphs"; bias-pull-down; drive-strength-microamp = <4000>; }; }; spdif_in_a10_pins: spdif-in-a10 { mux { groups = "spdif_in_a10"; function = "spdif_in"; bias-disable; }; }; spdif_in_a12_pins: spdif-in-a12 { mux { groups = "spdif_in_a12"; function = "spdif_in"; bias-disable; }; }; spdif_in_h_pins: spdif-in-h { mux { groups = "spdif_in_h"; function = "spdif_in"; bias-disable; }; }; spdif_out_h_pins: spdif-out-h { mux { groups = "spdif_out_h"; function = "spdif_out"; drive-strength-microamp = <500>; bias-disable; }; }; spdif_out_a11_pins: spdif-out-a11 { mux { groups = "spdif_out_a11"; function = "spdif_out"; drive-strength-microamp = <500>; bias-disable; }; }; spdif_out_a13_pins: spdif-out-a13 { mux { groups = "spdif_out_a13"; function = "spdif_out"; drive-strength-microamp = <500>; bias-disable; }; }; spicc0_x_pins: spicc0-x { mux { groups = "spi0_mosi_x", "spi0_miso_x", "spi0_clk_x"; function = "spi0"; drive-strength-microamp = <4000>; bias-disable; }; }; spicc0_ss0_x_pins: spicc0-ss0-x { mux { groups = "spi0_ss0_x"; function = "spi0"; drive-strength-microamp = <4000>; bias-disable; }; }; spicc0_c_pins: spicc0-c { mux { groups = "spi0_mosi_c", "spi0_miso_c", "spi0_ss0_c", "spi0_clk_c"; function = "spi0"; drive-strength-microamp = <4000>; bias-disable; }; }; spicc1_pins: spicc1 { mux { groups = "spi1_mosi", "spi1_miso", "spi1_clk"; function = "spi1"; drive-strength-microamp = <4000>; }; }; spicc1_ss0_pins: spicc1-ss0 { mux { groups = "spi1_ss0"; function = "spi1"; drive-strength-microamp = <4000>; bias-disable; }; }; tdm_a_din0_pins: tdm-a-din0 { mux { groups = "tdm_a_din0"; function = "tdm_a"; bias-disable; }; }; tdm_a_din1_pins: tdm-a-din1 { mux { groups = "tdm_a_din1"; function = "tdm_a"; bias-disable; }; }; tdm_a_dout0_pins: tdm-a-dout0 { mux { groups = "tdm_a_dout0"; function = "tdm_a"; bias-disable; drive-strength-microamp = <3000>; }; }; tdm_a_dout1_pins: tdm-a-dout1 { mux { groups = "tdm_a_dout1"; function = "tdm_a"; bias-disable; drive-strength-microamp = <3000>; }; }; tdm_a_fs_pins: tdm-a-fs { mux { groups = "tdm_a_fs"; function = "tdm_a"; bias-disable; drive-strength-microamp = <3000>; }; }; tdm_a_sclk_pins: tdm-a-sclk { mux { groups = "tdm_a_sclk"; function = "tdm_a"; bias-disable; drive-strength-microamp = <3000>; }; }; tdm_a_slv_fs_pins: tdm-a-slv-fs { mux { groups = "tdm_a_slv_fs"; function = "tdm_a"; bias-disable; }; }; tdm_a_slv_sclk_pins: tdm-a-slv-sclk { mux { groups = "tdm_a_slv_sclk"; function = "tdm_a"; bias-disable; }; }; tdm_b_din0_pins: tdm-b-din0 { mux { groups = "tdm_b_din0"; function = "tdm_b"; bias-disable; }; }; tdm_b_din1_pins: tdm-b-din1 { mux { groups = "tdm_b_din1"; function = "tdm_b"; bias-disable; }; }; tdm_b_din2_pins: tdm-b-din2 { mux { groups = "tdm_b_din2"; function = "tdm_b"; bias-disable; }; }; tdm_b_din3_a_pins: tdm-b-din3-a { mux { groups = "tdm_b_din3_a"; function = "tdm_b"; bias-disable; }; }; tdm_b_din3_h_pins: tdm-b-din3-h { mux { groups = "tdm_b_din3_h"; function = "tdm_b"; bias-disable; }; }; tdm_b_dout0_pins: tdm-b-dout0 { mux { groups = "tdm_b_dout0"; function = "tdm_b"; bias-disable; drive-strength-microamp = <3000>; }; }; tdm_b_dout1_pins: tdm-b-dout1 { mux { groups = "tdm_b_dout1"; function = "tdm_b"; bias-disable; drive-strength-microamp = <3000>; }; }; tdm_b_dout2_pins: tdm-b-dout2 { mux { groups = "tdm_b_dout2"; function = "tdm_b"; bias-disable; drive-strength-microamp = <3000>; }; }; tdm_b_dout3_a_pins: tdm-b-dout3-a { mux { groups = "tdm_b_dout3_a"; function = "tdm_b"; bias-disable; drive-strength-microamp = <3000>; }; }; tdm_b_dout3_h_pins: tdm-b-dout3-h { mux { groups = "tdm_b_dout3_h"; function = "tdm_b"; bias-disable; drive-strength-microamp = <3000>; }; }; tdm_b_fs_pins: tdm-b-fs { mux { groups = "tdm_b_fs"; function = "tdm_b"; bias-disable; drive-strength-microamp = <3000>; }; }; tdm_b_sclk_pins: tdm-b-sclk { mux { groups = "tdm_b_sclk"; function = "tdm_b"; bias-disable; drive-strength-microamp = <3000>; }; }; tdm_b_slv_fs_pins: tdm-b-slv-fs { mux { groups = "tdm_b_slv_fs"; function = "tdm_b"; bias-disable; }; }; tdm_b_slv_sclk_pins: tdm-b-slv-sclk { mux { groups = "tdm_b_slv_sclk"; function = "tdm_b"; bias-disable; }; }; tdm_c_din0_a_pins: tdm-c-din0-a { mux { groups = "tdm_c_din0_a"; function = "tdm_c"; bias-disable; }; }; tdm_c_din0_z_pins: tdm-c-din0-z { mux { groups = "tdm_c_din0_z"; function = "tdm_c"; bias-disable; }; }; tdm_c_din1_a_pins: tdm-c-din1-a { mux { groups = "tdm_c_din1_a"; function = "tdm_c"; bias-disable; }; }; tdm_c_din1_z_pins: tdm-c-din1-z { mux { groups = "tdm_c_din1_z"; function = "tdm_c"; bias-disable; }; }; tdm_c_din2_a_pins: tdm-c-din2-a { mux { groups = "tdm_c_din2_a"; function = "tdm_c"; bias-disable; }; }; eth_leds_pins: eth-leds { mux { groups = "eth_link_led", "eth_act_led"; function = "eth"; bias-disable; }; }; eth_pins: eth { mux { groups = "eth_mdio", "eth_mdc", "eth_rgmii_rx_clk", "eth_rx_dv", "eth_rxd0", "eth_rxd1", "eth_txen", "eth_txd0", "eth_txd1"; function = "eth"; drive-strength-microamp = <4000>; bias-disable; }; }; eth_rgmii_pins: eth-rgmii { mux { groups = "eth_rxd2_rgmii", "eth_rxd3_rgmii", "eth_rgmii_tx_clk", "eth_txd2_rgmii", "eth_txd3_rgmii"; function = "eth"; drive-strength-microamp = <4000>; bias-disable; }; }; tdm_c_din2_z_pins: tdm-c-din2-z { mux { groups = "tdm_c_din2_z"; function = "tdm_c"; bias-disable; }; }; tdm_c_din3_a_pins: tdm-c-din3-a { mux { groups = "tdm_c_din3_a"; function = "tdm_c"; bias-disable; }; }; tdm_c_din3_z_pins: tdm-c-din3-z { mux { groups = "tdm_c_din3_z"; function = "tdm_c"; bias-disable; }; }; tdm_c_dout0_a_pins: tdm-c-dout0-a { mux { groups = "tdm_c_dout0_a"; function = "tdm_c"; bias-disable; drive-strength-microamp = <3000>; }; }; tdm_c_dout0_z_pins: tdm-c-dout0-z { mux { groups = "tdm_c_dout0_z"; function = "tdm_c"; bias-disable; drive-strength-microamp = <3000>; }; }; tdm_c_dout1_a_pins: tdm-c-dout1-a { mux { groups = "tdm_c_dout1_a"; function = "tdm_c"; bias-disable; drive-strength-microamp = <3000>; }; }; tdm_c_dout1_z_pins: tdm-c-dout1-z { mux { groups = "tdm_c_dout1_z"; function = "tdm_c"; bias-disable; drive-strength-microamp = <3000>; }; }; tdm_c_dout2_a_pins: tdm-c-dout2-a { mux { groups = "tdm_c_dout2_a"; function = "tdm_c"; bias-disable; drive-strength-microamp = <3000>; }; }; tdm_c_dout2_z_pins: tdm-c-dout2-z { mux { groups = "tdm_c_dout2_z"; function = "tdm_c"; bias-disable; drive-strength-microamp = <3000>; }; }; tdm_c_dout3_a_pins: tdm-c-dout3-a { mux { groups = "tdm_c_dout3_a"; function = "tdm_c"; bias-disable; drive-strength-microamp = <3000>; }; }; tdm_c_dout3_z_pins: tdm-c-dout3-z { mux { groups = "tdm_c_dout3_z"; function = "tdm_c"; bias-disable; drive-strength-microamp = <3000>; }; }; tdm_c_fs_a_pins: tdm-c-fs-a { mux { groups = "tdm_c_fs_a"; function = "tdm_c"; bias-disable; drive-strength-microamp = <3000>; }; }; tdm_c_fs_z_pins: tdm-c-fs-z { mux { groups = "tdm_c_fs_z"; function = "tdm_c"; bias-disable; drive-strength-microamp = <3000>; }; }; tdm_c_sclk_a_pins: tdm-c-sclk-a { mux { groups = "tdm_c_sclk_a"; function = "tdm_c"; bias-disable; drive-strength-microamp = <3000>; }; }; tdm_c_sclk_z_pins: tdm-c-sclk-z { mux { groups = "tdm_c_sclk_z"; function = "tdm_c"; bias-disable; drive-strength-microamp = <3000>; }; }; tdm_c_slv_fs_a_pins: tdm-c-slv-fs-a { mux { groups = "tdm_c_slv_fs_a"; function = "tdm_c"; bias-disable; }; }; tdm_c_slv_fs_z_pins: tdm-c-slv-fs-z { mux { groups = "tdm_c_slv_fs_z"; function = "tdm_c"; bias-disable; }; }; tdm_c_slv_sclk_a_pins: tdm-c-slv-sclk-a { mux { groups = "tdm_c_slv_sclk_a"; function = "tdm_c"; bias-disable; }; }; tdm_c_slv_sclk_z_pins: tdm-c-slv-sclk-z { mux { groups = "tdm_c_slv_sclk_z"; function = "tdm_c"; bias-disable; }; }; uart_a_pins: uart-a { mux { groups = "uart_a_tx", "uart_a_rx"; function = "uart_a"; bias-disable; }; }; uart_a_cts_rts_pins: uart-a-cts-rts { mux { groups = "uart_a_cts", "uart_a_rts"; function = "uart_a"; bias-disable; }; }; uart_b_pins: uart-b { mux { groups = "uart_b_tx", "uart_b_rx"; function = "uart_b"; bias-disable; }; }; uart_c_pins: uart-c { mux { groups = "uart_c_tx", "uart_c_rx"; function = "uart_c"; bias-disable; }; }; uart_c_cts_rts_pins: uart-c-cts-rts { mux { groups = "uart_c_cts", "uart_c_rts"; function = "uart_c"; bias-disable; }; }; }; }; cpu_temp: temperature-sensor@34800 { compatible = "amlogic,g12a-cpu-thermal", "amlogic,g12a-thermal"; reg = <0x0 0x34800 0x0 0x50>; interrupts = ; clocks = <&clkc CLKID_TS>; #thermal-sensor-cells = <0>; amlogic,ao-secure = <&sec_AO>; }; ddr_temp: temperature-sensor@34c00 { compatible = "amlogic,g12a-ddr-thermal", "amlogic,g12a-thermal"; reg = <0x0 0x34c00 0x0 0x50>; interrupts = ; clocks = <&clkc CLKID_TS>; #thermal-sensor-cells = <0>; amlogic,ao-secure = <&sec_AO>; }; usb2_phy0: phy@36000 { compatible = "amlogic,g12a-usb2-phy"; reg = <0x0 0x36000 0x0 0x2000>; clocks = <&xtal>; clock-names = "xtal"; resets = <&reset RESET_USB_PHY20>; reset-names = "phy"; #phy-cells = <0>; }; dmc: bus@38000 { compatible = "simple-bus"; reg = <0x0 0x38000 0x0 0x400>; #address-cells = <2>; #size-cells = <2>; ranges = <0x0 0x0 0x0 0x38000 0x0 0x400>; canvas: video-lut@48 { compatible = "amlogic,canvas"; reg = <0x0 0x48 0x0 0x14>; }; }; usb2_phy1: phy@3a000 { compatible = "amlogic,g12a-usb2-phy"; reg = <0x0 0x3a000 0x0 0x2000>; clocks = <&xtal>; clock-names = "xtal"; resets = <&reset RESET_USB_PHY21>; reset-names = "phy"; #phy-cells = <0>; }; hiu: bus@3c000 { compatible = "simple-bus"; reg = <0x0 0x3c000 0x0 0x1400>; #address-cells = <2>; #size-cells = <2>; ranges = <0x0 0x0 0x0 0x3c000 0x0 0x1400>; hhi: system-controller@0 { compatible = "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon"; reg = <0 0 0 0x400>; clkc: clock-controller { compatible = "amlogic,g12a-clkc"; #clock-cells = <1>; clocks = <&xtal>; clock-names = "xtal"; }; pwrc: power-controller { compatible = "amlogic,meson-g12a-pwrc"; #power-domain-cells = <1>; amlogic,ao-sysctrl = <&rti>; resets = <&reset RESET_VIU>, <&reset RESET_VENC>, <&reset RESET_VCBUS>, <&reset RESET_BT656>, <&reset RESET_RDMA>, <&reset RESET_VENCI>, <&reset RESET_VENCP>, <&reset RESET_VDAC>, <&reset RESET_VDI6>, <&reset RESET_VENCL>, <&reset RESET_VID_LOCK>; reset-names = "viu", "venc", "vcbus", "bt656", "rdma", "venci", "vencp", "vdac", "vdi6", "vencl", "vid_lock"; clocks = <&clkc CLKID_VPU>, <&clkc CLKID_VAPB>; clock-names = "vpu", "vapb"; /* * VPU clocking is provided by two identical clock paths * VPU_0 and VPU_1 muxed to a single clock by a glitch * free mux to safely change frequency while running. * Same for VAPB but with a final gate after the glitch free mux. */ assigned-clocks = <&clkc CLKID_VPU_0_SEL>, <&clkc CLKID_VPU_0>, <&clkc CLKID_VPU>, /* Glitch free mux */ <&clkc CLKID_VAPB_0_SEL>, <&clkc CLKID_VAPB_0>, <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */ assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>, <0>, /* Do Nothing */ <&clkc CLKID_VPU_0>, <&clkc CLKID_FCLK_DIV4>, <0>, /* Do Nothing */ <&clkc CLKID_VAPB_0>; assigned-clock-rates = <0>, /* Do Nothing */ <666666666>, <0>, /* Do Nothing */ <0>, /* Do Nothing */ <250000000>, <0>; /* Do Nothing */ }; }; }; usb3_pcie_phy: phy@46000 { compatible = "amlogic,g12a-usb3-pcie-phy"; reg = <0x0 0x46000 0x0 0x2000>; clocks = <&clkc CLKID_PCIE_PLL>; clock-names = "ref_clk"; resets = <&reset RESET_PCIE_PHY>; reset-names = "phy"; assigned-clocks = <&clkc CLKID_PCIE_PLL>; assigned-clock-rates = <100000000>; #phy-cells = <1>; }; eth_phy: mdio-multiplexer@4c000 { compatible = "amlogic,g12a-mdio-mux"; reg = <0x0 0x4c000 0x0 0xa4>; clocks = <&clkc CLKID_ETH_PHY>, <&xtal>, <&clkc CLKID_MPLL_50M>; clock-names = "pclk", "clkin0", "clkin1"; mdio-parent-bus = <&mdio0>; #address-cells = <1>; #size-cells = <0>; ext_mdio: mdio@0 { reg = <0>; #address-cells = <1>; #size-cells = <0>; }; int_mdio: mdio@1 { reg = <1>; #address-cells = <1>; #size-cells = <0>; internal_ephy: ethernet_phy@8 { compatible = "ethernet-phy-id0180.3301", "ethernet-phy-ieee802.3-c22"; interrupts = ; reg = <8>; max-speed = <100>; }; }; }; }; aobus: bus@ff800000 { compatible = "simple-bus"; reg = <0x0 0xff800000 0x0 0x100000>; #address-cells = <2>; #size-cells = <2>; ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>; rti: sys-ctrl@0 { compatible = "amlogic,meson-gx-ao-sysctrl", "simple-mfd", "syscon"; reg = <0x0 0x0 0x0 0x100>; #address-cells = <2>; #size-cells = <2>; ranges = <0x0 0x0 0x0 0x0 0x0 0x100>; clkc_AO: clock-controller { compatible = "amlogic,meson-g12a-aoclkc"; #clock-cells = <1>; #reset-cells = <1>; clocks = <&xtal>, <&clkc CLKID_CLK81>; clock-names = "xtal", "mpeg-clk"; }; ao_pinctrl: pinctrl@14 { compatible = "amlogic,meson-g12a-aobus-pinctrl"; #address-cells = <2>; #size-cells = <2>; ranges; gpio_ao: bank@14 { reg = <0x0 0x14 0x0 0x8>, <0x0 0x1c 0x0 0x8>, <0x0 0x24 0x0 0x14>; reg-names = "mux", "ds", "gpio"; gpio-controller; #gpio-cells = <2>; gpio-ranges = <&ao_pinctrl 0 0 15>; }; i2c_ao_sck_pins: i2c_ao_sck_pins { mux { groups = "i2c_ao_sck"; function = "i2c_ao"; bias-disable; drive-strength-microamp = <3000>; }; }; i2c_ao_sda_pins: i2c_ao_sda { mux { groups = "i2c_ao_sda"; function = "i2c_ao"; bias-disable; drive-strength-microamp = <3000>; }; }; i2c_ao_sck_e_pins: i2c_ao_sck_e { mux { groups = "i2c_ao_sck_e"; function = "i2c_ao"; bias-disable; drive-strength-microamp = <3000>; }; }; i2c_ao_sda_e_pins: i2c_ao_sda_e { mux { groups = "i2c_ao_sda_e"; function = "i2c_ao"; bias-disable; drive-strength-microamp = <3000>; }; }; mclk0_ao_pins: mclk0-ao { mux { groups = "mclk0_ao"; function = "mclk0_ao"; bias-disable; drive-strength-microamp = <3000>; }; }; tdm_ao_b_din0_pins: tdm-ao-b-din0 { mux { groups = "tdm_ao_b_din0"; function = "tdm_ao_b"; bias-disable; }; }; spdif_ao_out_pins: spdif-ao-out { mux { groups = "spdif_ao_out"; function = "spdif_ao_out"; drive-strength-microamp = <500>; bias-disable; }; }; tdm_ao_b_din1_pins: tdm-ao-b-din1 { mux { groups = "tdm_ao_b_din1"; function = "tdm_ao_b"; bias-disable; }; }; tdm_ao_b_din2_pins: tdm-ao-b-din2 { mux { groups = "tdm_ao_b_din2"; function = "tdm_ao_b"; bias-disable; }; }; tdm_ao_b_dout0_pins: tdm-ao-b-dout0 { mux { groups = "tdm_ao_b_dout0"; function = "tdm_ao_b"; bias-disable; drive-strength-microamp = <3000>; }; }; tdm_ao_b_dout1_pins: tdm-ao-b-dout1 { mux { groups = "tdm_ao_b_dout1"; function = "tdm_ao_b"; bias-disable; drive-strength-microamp = <3000>; }; }; tdm_ao_b_dout2_pins: tdm-ao-b-dout2 { mux { groups = "tdm_ao_b_dout2"; function = "tdm_ao_b"; bias-disable; drive-strength-microamp = <3000>; }; }; tdm_ao_b_fs_pins: tdm-ao-b-fs { mux { groups = "tdm_ao_b_fs"; function = "tdm_ao_b"; bias-disable; drive-strength-microamp = <3000>; }; }; tdm_ao_b_sclk_pins: tdm-ao-b-sclk { mux { groups = "tdm_ao_b_sclk"; function = "tdm_ao_b"; bias-disable; drive-strength-microamp = <3000>; }; }; tdm_ao_b_slv_fs_pins: tdm-ao-b-slv-fs { mux { groups = "tdm_ao_b_slv_fs"; function = "tdm_ao_b"; bias-disable; }; }; tdm_ao_b_slv_sclk_pins: tdm-ao-b-slv-sclk { mux { groups = "tdm_ao_b_slv_sclk"; function = "tdm_ao_b"; bias-disable; }; }; uart_ao_a_pins: uart-a-ao { mux { groups = "uart_ao_a_tx", "uart_ao_a_rx"; function = "uart_ao_a"; bias-disable; }; }; uart_ao_a_cts_rts_pins: uart-ao-a-cts-rts { mux { groups = "uart_ao_a_cts", "uart_ao_a_rts"; function = "uart_ao_a"; bias-disable; }; }; pwm_a_e_pins: pwm-a-e { mux { groups = "pwm_a_e"; function = "pwm_a_e"; bias-disable; }; }; pwm_ao_a_pins: pwm-ao-a { mux { groups = "pwm_ao_a"; function = "pwm_ao_a"; bias-disable; }; }; pwm_ao_b_pins: pwm-ao-b { mux { groups = "pwm_ao_b"; function = "pwm_ao_b"; bias-disable; }; }; pwm_ao_c_4_pins: pwm-ao-c-4 { mux { groups = "pwm_ao_c_4"; function = "pwm_ao_c"; bias-disable; }; }; pwm_ao_c_6_pins: pwm-ao-c-6 { mux { groups = "pwm_ao_c_6"; function = "pwm_ao_c"; bias-disable; }; }; pwm_ao_d_5_pins: pwm-ao-d-5 { mux { groups = "pwm_ao_d_5"; function = "pwm_ao_d"; bias-disable; }; }; pwm_ao_d_10_pins: pwm-ao-d-10 { mux { groups = "pwm_ao_d_10"; function = "pwm_ao_d"; bias-disable; }; }; pwm_ao_d_e_pins: pwm-ao-d-e { mux { groups = "pwm_ao_d_e"; function = "pwm_ao_d"; }; }; remote_input_ao_pins: remote-input-ao { mux { groups = "remote_ao_input"; function = "remote_ao_input"; bias-disable; }; }; }; }; vrtc: rtc@0a8 { compatible = "amlogic,meson-vrtc"; reg = <0x0 0x000a8 0x0 0x4>; }; cec_AO: cec@100 { compatible = "amlogic,meson-gx-ao-cec"; reg = <0x0 0x00100 0x0 0x14>; interrupts = ; clocks = <&clkc_AO CLKID_AO_CEC>; clock-names = "core"; status = "disabled"; }; sec_AO: ao-secure@140 { compatible = "amlogic,meson-gx-ao-secure", "syscon"; reg = <0x0 0x140 0x0 0x140>; amlogic,has-chip-id; }; cecb_AO: cec@280 { compatible = "amlogic,meson-g12a-ao-cec"; reg = <0x0 0x00280 0x0 0x1c>; interrupts = ; clocks = <&clkc_AO CLKID_AO_CTS_OSCIN>; clock-names = "oscin"; status = "disabled"; }; pwm_AO_cd: pwm@2000 { compatible = "amlogic,meson-g12a-ao-pwm-cd"; reg = <0x0 0x2000 0x0 0x20>; #pwm-cells = <3>; status = "disabled"; }; uart_AO: serial@3000 { compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; reg = <0x0 0x3000 0x0 0x18>; interrupts = ; clocks = <&xtal>, <&clkc_AO CLKID_AO_UART>, <&xtal>; clock-names = "xtal", "pclk", "baud"; status = "disabled"; }; uart_AO_B: serial@4000 { compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; reg = <0x0 0x4000 0x0 0x18>; interrupts = ; clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>; clock-names = "xtal", "pclk", "baud"; status = "disabled"; }; i2c_AO: i2c@5000 { compatible = "amlogic,meson-axg-i2c"; status = "disabled"; reg = <0x0 0x05000 0x0 0x20>; interrupts = ; #address-cells = <1>; #size-cells = <0>; clocks = <&clkc CLKID_I2C>; }; pwm_AO_ab: pwm@7000 { compatible = "amlogic,meson-g12a-ao-pwm-ab"; reg = <0x0 0x7000 0x0 0x20>; #pwm-cells = <3>; status = "disabled"; }; ir: ir@8000 { compatible = "amlogic,meson-gxbb-ir"; reg = <0x0 0x8000 0x0 0x20>; interrupts = ; status = "disabled"; }; saradc: adc@9000 { compatible = "amlogic,meson-g12a-saradc", "amlogic,meson-saradc"; reg = <0x0 0x9000 0x0 0x48>; #io-channel-cells = <1>; interrupts = ; clocks = <&xtal>, <&clkc_AO CLKID_AO_SAR_ADC>, <&clkc_AO CLKID_AO_SAR_ADC_CLK>, <&clkc_AO CLKID_AO_SAR_ADC_SEL>; clock-names = "clkin", "core", "adc_clk", "adc_sel"; status = "disabled"; }; }; vdec: video-decoder@ff620000 { compatible = "amlogic,g12a-vdec"; reg = <0x0 0xff620000 0x0 0x10000>, <0x0 0xffd0e180 0x0 0xe4>; reg-names = "dos", "esparser"; interrupts = , ; interrupt-names = "vdec", "esparser"; amlogic,ao-sysctrl = <&rti>; amlogic,canvas = <&canvas>; clocks = <&clkc CLKID_PARSER>, <&clkc CLKID_DOS>, <&clkc CLKID_VDEC_1>, <&clkc CLKID_VDEC_HEVC>, <&clkc CLKID_VDEC_HEVCF>; clock-names = "dos_parser", "dos", "vdec_1", "vdec_hevc", "vdec_hevcf"; resets = <&reset RESET_PARSER>; reset-names = "esparser"; }; vpu: vpu@ff900000 { compatible = "amlogic,meson-g12a-vpu"; reg = <0x0 0xff900000 0x0 0x100000>, <0x0 0xff63c000 0x0 0x1000>; reg-names = "vpu", "hhi"; interrupts = ; #address-cells = <1>; #size-cells = <0>; amlogic,canvas = <&canvas>; /* CVBS VDAC output port */ cvbs_vdac_port: port@0 { reg = <0>; }; /* HDMI-TX output port */ hdmi_tx_port: port@1 { reg = <1>; hdmi_tx_out: endpoint { remote-endpoint = <&hdmi_tx_in>; }; }; }; gic: interrupt-controller@ffc01000 { compatible = "arm,gic-400"; reg = <0x0 0xffc01000 0 0x1000>, <0x0 0xffc02000 0 0x2000>, <0x0 0xffc04000 0 0x2000>, <0x0 0xffc06000 0 0x2000>; interrupt-controller; interrupts = ; #interrupt-cells = <3>; #address-cells = <0>; }; cbus: bus@ffd00000 { compatible = "simple-bus"; reg = <0x0 0xffd00000 0x0 0x100000>; #address-cells = <2>; #size-cells = <2>; ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x100000>; reset: reset-controller@1004 { compatible = "amlogic,meson-axg-reset"; reg = <0x0 0x1004 0x0 0x9c>; #reset-cells = <1>; }; gpio_intc: interrupt-controller@f080 { compatible = "amlogic,meson-g12a-gpio-intc", "amlogic,meson-gpio-intc"; reg = <0x0 0xf080 0x0 0x10>; interrupt-controller; #interrupt-cells = <2>; amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>; }; spicc0: spi@13000 { compatible = "amlogic,meson-g12a-spicc"; reg = <0x0 0x13000 0x0 0x44>; interrupts = ; clocks = <&clkc CLKID_SPICC0>, <&clkc CLKID_SPICC0_SCLK>; clock-names = "core", "pclk"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; spicc1: spi@15000 { compatible = "amlogic,meson-g12a-spicc"; reg = <0x0 0x15000 0x0 0x44>; interrupts = ; clocks = <&clkc CLKID_SPICC1>, <&clkc CLKID_SPICC1_SCLK>; clock-names = "core", "pclk"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; spifc: spi@14000 { compatible = "amlogic,meson-gxbb-spifc"; status = "disabled"; reg = <0x0 0x14000 0x0 0x80>; #address-cells = <1>; #size-cells = <0>; clocks = <&clkc CLKID_CLK81>; }; pwm_ef: pwm@19000 { compatible = "amlogic,meson-g12a-ee-pwm"; reg = <0x0 0x19000 0x0 0x20>; #pwm-cells = <3>; status = "disabled"; }; pwm_cd: pwm@1a000 { compatible = "amlogic,meson-g12a-ee-pwm"; reg = <0x0 0x1a000 0x0 0x20>; #pwm-cells = <3>; status = "disabled"; }; pwm_ab: pwm@1b000 { compatible = "amlogic,meson-g12a-ee-pwm"; reg = <0x0 0x1b000 0x0 0x20>; #pwm-cells = <3>; status = "disabled"; }; i2c3: i2c@1c000 { compatible = "amlogic,meson-axg-i2c"; status = "disabled"; reg = <0x0 0x1c000 0x0 0x20>; interrupts = ; #address-cells = <1>; #size-cells = <0>; clocks = <&clkc CLKID_I2C>; }; i2c2: i2c@1d000 { compatible = "amlogic,meson-axg-i2c"; status = "disabled"; reg = <0x0 0x1d000 0x0 0x20>; interrupts = ; #address-cells = <1>; #size-cells = <0>; clocks = <&clkc CLKID_I2C>; }; i2c1: i2c@1e000 { compatible = "amlogic,meson-axg-i2c"; status = "disabled"; reg = <0x0 0x1e000 0x0 0x20>; interrupts = ; #address-cells = <1>; #size-cells = <0>; clocks = <&clkc CLKID_I2C>; }; i2c0: i2c@1f000 { compatible = "amlogic,meson-axg-i2c"; status = "disabled"; reg = <0x0 0x1f000 0x0 0x20>; interrupts = ; #address-cells = <1>; #size-cells = <0>; clocks = <&clkc CLKID_I2C>; }; clk_msr: clock-measure@18000 { compatible = "amlogic,meson-g12a-clk-measure"; reg = <0x0 0x18000 0x0 0x10>; }; uart_C: serial@22000 { compatible = "amlogic,meson-gx-uart"; reg = <0x0 0x22000 0x0 0x18>; interrupts = ; clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>; clock-names = "xtal", "pclk", "baud"; status = "disabled"; }; uart_B: serial@23000 { compatible = "amlogic,meson-gx-uart"; reg = <0x0 0x23000 0x0 0x18>; interrupts = ; clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>; clock-names = "xtal", "pclk", "baud"; status = "disabled"; }; uart_A: serial@24000 { compatible = "amlogic,meson-gx-uart"; reg = <0x0 0x24000 0x0 0x18>; interrupts = ; clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>; clock-names = "xtal", "pclk", "baud"; status = "disabled"; }; }; sd_emmc_a: sd@ffe03000 { compatible = "amlogic,meson-axg-mmc"; reg = <0x0 0xffe03000 0x0 0x800>; interrupts = ; status = "disabled"; clocks = <&clkc CLKID_SD_EMMC_A>, <&clkc CLKID_SD_EMMC_A_CLK0>, <&clkc CLKID_FCLK_DIV2>; clock-names = "core", "clkin0", "clkin1"; resets = <&reset RESET_SD_EMMC_A>; }; sd_emmc_b: sd@ffe05000 { compatible = "amlogic,meson-axg-mmc"; reg = <0x0 0xffe05000 0x0 0x800>; interrupts = ; status = "disabled"; clocks = <&clkc CLKID_SD_EMMC_B>, <&clkc CLKID_SD_EMMC_B_CLK0>, <&clkc CLKID_FCLK_DIV2>; clock-names = "core", "clkin0", "clkin1"; resets = <&reset RESET_SD_EMMC_B>; }; sd_emmc_c: mmc@ffe07000 { compatible = "amlogic,meson-axg-mmc"; reg = <0x0 0xffe07000 0x0 0x800>; interrupts = ; status = "disabled"; clocks = <&clkc CLKID_SD_EMMC_C>, <&clkc CLKID_SD_EMMC_C_CLK0>, <&clkc CLKID_FCLK_DIV2>; clock-names = "core", "clkin0", "clkin1"; resets = <&reset RESET_SD_EMMC_C>; }; usb: usb@ffe09000 { status = "disabled"; compatible = "amlogic,meson-g12a-usb-ctrl"; reg = <0x0 0xffe09000 0x0 0xa0>; interrupts = ; #address-cells = <2>; #size-cells = <2>; ranges; clocks = <&clkc CLKID_USB>; resets = <&reset RESET_USB>; dr_mode = "otg"; phys = <&usb2_phy0>, <&usb2_phy1>, <&usb3_pcie_phy PHY_TYPE_USB3>; phy-names = "usb2-phy0", "usb2-phy1", "usb3-phy0"; dwc2: usb@ff400000 { compatible = "amlogic,meson-g12a-usb", "snps,dwc2"; reg = <0x0 0xff400000 0x0 0x40000>; interrupts = ; clocks = <&clkc CLKID_USB1_DDR_BRIDGE>; clock-names = "otg"; phys = <&usb2_phy1>; phy-names = "usb2-phy"; dr_mode = "peripheral"; g-rx-fifo-size = <192>; g-np-tx-fifo-size = <128>; g-tx-fifo-size = <128 128 16 16 16>; }; dwc3: usb@ff500000 { compatible = "snps,dwc3"; reg = <0x0 0xff500000 0x0 0x100000>; interrupts = ; dr_mode = "host"; snps,dis_u2_susphy_quirk; snps,quirk-frame-length-adjustment; snps,parkmode-disable-ss-quirk; }; }; mali: gpu@ffe40000 { compatible = "amlogic,meson-g12a-mali", "arm,mali-bifrost"; reg = <0x0 0xffe40000 0x0 0x40000>; interrupt-parent = <&gic>; interrupts = , , ; interrupt-names = "job", "mmu", "gpu"; clocks = <&clkc CLKID_MALI>; resets = <&reset RESET_DVALIN_CAPB3>, <&reset RESET_DVALIN>; operating-points-v2 = <&gpu_opp_table>; #cooling-cells = <2>; }; }; timer { compatible = "arm,armv8-timer"; interrupts = , , , ; arm,no-tick-in-suspend; }; xtal: xtal-clk { compatible = "fixed-clock"; clock-frequency = <24000000>; clock-output-names = "xtal"; #clock-cells = <0>; }; };