// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2020 Dongjin Kim */ #include "meson-sm1.dtsi" #include #include #include / { aliases { serial0 = &uart_AO; ethernet0 = ðmac; }; chosen { stdout-path = "serial0:115200n8"; }; memory@0 { device_type = "memory"; reg = <0x0 0x0 0x0 0x40000000>; }; emmc_pwrseq: emmc-pwrseq { compatible = "mmc-pwrseq-emmc"; reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; }; tflash_vdd: regulator-tflash_vdd { compatible = "regulator-fixed"; regulator-name = "TFLASH_VDD"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; gpio = <&gpio_ao GPIOAO_3 GPIO_OPEN_DRAIN>; enable-active-high; regulator-always-on; }; tf_io: gpio-regulator-tf_io { compatible = "regulator-gpio"; regulator-name = "TF_IO"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; vin-supply = <&vcc_5v>; enable-gpio = <&gpio GPIOE_2 GPIO_ACTIVE_HIGH>; enable-active-high; regulator-always-on; gpios = <&gpio_ao GPIOAO_6 GPIO_OPEN_SOURCE>; gpios-states = <0>; states = <3300000 0>, <1800000 1>; }; flash_1v8: regulator-flash_1v8 { compatible = "regulator-fixed"; regulator-name = "FLASH_1V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; vin-supply = <&vcc_3v3>; regulator-always-on; }; main_12v: regulator-main_12v { compatible = "regulator-fixed"; regulator-name = "12V"; regulator-min-microvolt = <12000000>; regulator-max-microvolt = <12000000>; regulator-always-on; }; vcc_5v: regulator-vcc_5v { compatible = "regulator-fixed"; regulator-name = "5V"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on; vin-supply = <&main_12v>; gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; enable-active-high; }; vcc_1v8: regulator-vcc_1v8 { compatible = "regulator-fixed"; regulator-name = "VCC_1V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; vin-supply = <&vcc_3v3>; regulator-always-on; }; vcc_3v3: regulator-vcc_3v3 { compatible = "regulator-fixed"; regulator-name = "VCC_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; vin-supply = <&vddao_3v3>; regulator-always-on; /* FIXME: actually controlled by VDDCPU_B_EN */ }; vddcpu: regulator-vddcpu { /* * MP8756GD Regulator. */ compatible = "pwm-regulator"; regulator-name = "VDDCPU"; regulator-min-microvolt = <721000>; regulator-max-microvolt = <1022000>; vin-supply = <&main_12v>; pwms = <&pwm_AO_cd 1 1250 0>; pwm-dutycycle-range = <100 0>; regulator-boot-on; regulator-always-on; }; usb_pwr_en: regulator-usb_pwr_en { compatible = "regulator-fixed"; regulator-name = "USB_PWR_EN"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; vin-supply = <&vcc_5v>; /* Connected to the microUSB port power enable */ gpio = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>; enable-active-high; }; vddao_1v8: regulator-vddao_1v8 { compatible = "regulator-fixed"; regulator-name = "VDDAO_1V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; vin-supply = <&vddao_3v3>; regulator-always-on; }; vddao_3v3: regulator-vddao_3v3 { compatible = "regulator-fixed"; regulator-name = "VDDAO_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; vin-supply = <&main_12v>; regulator-always-on; }; hdmi-connector { compatible = "hdmi-connector"; type = "a"; port { hdmi_connector_in: endpoint { remote-endpoint = <&hdmi_tx_tmds_out>; }; }; }; sound { compatible = "amlogic,axg-sound-card"; audio-aux-devs = <&tdmout_b>; audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", "TDMOUT_B IN 1", "FRDDR_B OUT 1", "TDMOUT_B IN 2", "FRDDR_C OUT 1", "TDM_B Playback", "TDMOUT_B OUT"; assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; assigned-clock-parents = <0>, <0>, <0>; assigned-clock-rates = <294912000>, <270950400>, <393216000>; status = "okay"; dai-link-0 { sound-dai = <&frddr_a>; }; dai-link-1 { sound-dai = <&frddr_b>; }; dai-link-2 { sound-dai = <&frddr_c>; }; /* 8ch hdmi interface */ dai-link-3 { sound-dai = <&tdmif_b>; dai-format = "i2s"; dai-tdm-slot-tx-mask-0 = <1 1>; dai-tdm-slot-tx-mask-1 = <1 1>; dai-tdm-slot-tx-mask-2 = <1 1>; dai-tdm-slot-tx-mask-3 = <1 1>; mclk-fs = <256>; codec { sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; }; }; /* hdmi glue */ dai-link-4 { sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; codec { sound-dai = <&hdmi_tx>; }; }; }; }; &arb { status = "okay"; }; &clkc_audio { status = "okay"; }; &cpu0 { cpu-supply = <&vddcpu>; operating-points-v2 = <&cpu_opp_table>; clocks = <&clkc CLKID_CPU_CLK>; clock-latency = <50000>; }; &cpu1 { cpu-supply = <&vddcpu>; operating-points-v2 = <&cpu_opp_table>; clocks = <&clkc CLKID_CPU1_CLK>; clock-latency = <50000>; }; &cpu2 { cpu-supply = <&vddcpu>; operating-points-v2 = <&cpu_opp_table>; clocks = <&clkc CLKID_CPU2_CLK>; clock-latency = <50000>; }; &cpu3 { cpu-supply = <&vddcpu>; operating-points-v2 = <&cpu_opp_table>; clocks = <&clkc CLKID_CPU3_CLK>; clock-latency = <50000>; }; &ext_mdio { external_phy: ethernet-phy@0 { /* Realtek RTL8211F (0x001cc916) */ reg = <0>; max-speed = <1000>; interrupt-parent = <&gpio_intc>; /* MAC_INTR on GPIOZ_14 */ interrupts = <26 IRQ_TYPE_LEVEL_LOW>; }; }; ðmac { pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; pinctrl-names = "default"; status = "okay"; phy-mode = "rgmii"; phy-handle = <&external_phy>; amlogic,tx-delay-ns = <2>; }; &frddr_a { status = "okay"; }; &frddr_b { status = "okay"; }; &frddr_c { status = "okay"; }; &gpio { gpio-line-names = /* GPIOZ */ "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", /* GPIOH */ "", "", "", "", "", "PIN_36", /* GPIOH_5 */ "PIN_26", /* GPIOH_6 */ "PIN_32", /* GPIOH_7 */ "", /* BOOT */ "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", /* GPIOC */ "", "", "", "", "", "", "", "", /* GPIOA */ "", "", "", "", "", "", "", "", "", "", "", "", "", "", "PIN_27", /* GPIOA_14 */ "PIN_28", /* GPIOA_15 */ /* GPIOX */ "PIN_16", /* GPIOX_0 */ "PIN_18", /* GPIOX_1 */ "PIN_22", /* GPIOX_2 */ "PIN_11", /* GPIOX_3 */ "PIN_13", /* GPIOX_4 */ "PIN_7", /* GPIOX_5 */ "PIN_33", /* GPIOX_6 */ "PIN_15", /* GPIOX_7 */ "PIN_19", /* GPIOX_8 */ "PIN_21", /* GPIOX_9 */ "PIN_24", /* GPIOX_10 */ "PIN_23", /* GPIOX_11 */ "PIN_8", /* GPIOX_12 */ "PIN_10", /* GPIOX_13 */ "PIN_29", /* GPIOX_14 */ "PIN_31", /* GPIOX_15 */ "PIN_12", /* GPIOX_16 */ "PIN_3", /* GPIOX_17 */ "PIN_5", /* GPIOX_18 */ "PIN_35"; /* GPIOX_19 */ }; &gpio_ao { gpio-line-names = /* GPIOAO */ "", "", "", "", "PIN_47", /* GPIOAO_4 */ "", "", "PIN_45", /* GPIOAO_7 */ "PIN_46", /* GPIOAO_8 */ "PIN_44", /* GPIOAO_9 */ "PIN_42", /* GPIOAO_10 */ "", /* GPIOE */ "", "", ""; }; &hdmi_tx { status = "okay"; pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; pinctrl-names = "default"; hdmi-supply = <&vcc_5v>; }; &hdmi_tx_tmds_port { hdmi_tx_tmds_out: endpoint { remote-endpoint = <&hdmi_connector_in>; }; }; &ir { status = "okay"; pinctrl-0 = <&remote_input_ao_pins>; pinctrl-names = "default"; }; &pwm_AO_cd { pinctrl-0 = <&pwm_ao_d_e_pins>; pinctrl-names = "default"; clocks = <&xtal>; clock-names = "clkin1"; status = "okay"; }; &saradc { status = "okay"; }; /* SD card */ &sd_emmc_b { status = "okay"; pinctrl-0 = <&sdcard_c_pins>; pinctrl-1 = <&sdcard_clk_gate_c_pins>; pinctrl-names = "default", "clk-gate"; bus-width = <4>; cap-sd-highspeed; max-frequency = <200000000>; sd-uhs-sdr12; sd-uhs-sdr25; sd-uhs-sdr50; sd-uhs-sdr104; disable-wp; cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&tflash_vdd>; vqmmc-supply = <&tf_io>; }; /* eMMC */ &sd_emmc_c { status = "okay"; pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; pinctrl-1 = <&emmc_clk_gate_pins>; pinctrl-names = "default", "clk-gate"; bus-width = <8>; cap-mmc-highspeed; mmc-ddr-1_8v; mmc-hs200-1_8v; max-frequency = <200000000>; disable-wp; mmc-pwrseq = <&emmc_pwrseq>; vmmc-supply = <&vcc_3v3>; vqmmc-supply = <&flash_1v8>; }; &tdmif_b { status = "okay"; }; &tdmout_b { status = "okay"; }; &tohdmitx { status = "okay"; }; &uart_AO { status = "okay"; pinctrl-0 = <&uart_ao_a_pins>; pinctrl-names = "default"; }; &usb { status = "okay"; vbus-supply = <&usb_pwr_en>; }; &usb2_phy0 { phy-supply = <&vcc_5v>; };