// SPDX-License-Identifier: GPL-2.0-only /* Copyright (c) 2014-2015, The Linux Foundation. All rights reserved. */ #include #include #include #include #include #include #include / { interrupt-parent = <&intc>; #address-cells = <2>; #size-cells = <2>; chosen { }; clocks { xo_board: xo_board { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <19200000>; clock-output-names = "xo_board"; }; sleep_clk: sleep_clk { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32764>; clock-output-names = "sleep_clk"; }; }; cpus { #address-cells = <2>; #size-cells = <0>; CPU0: cpu@0 { device_type = "cpu"; compatible = "qcom,kryo"; reg = <0x0 0x0>; enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; capacity-dmips-mhz = <1024>; clocks = <&kryocc 0>; operating-points-v2 = <&cluster0_opp>; #cooling-cells = <2>; next-level-cache = <&L2_0>; L2_0: l2-cache { compatible = "cache"; cache-level = <2>; }; }; CPU1: cpu@1 { device_type = "cpu"; compatible = "qcom,kryo"; reg = <0x0 0x1>; enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; capacity-dmips-mhz = <1024>; clocks = <&kryocc 0>; operating-points-v2 = <&cluster0_opp>; #cooling-cells = <2>; next-level-cache = <&L2_0>; }; CPU2: cpu@100 { device_type = "cpu"; compatible = "qcom,kryo"; reg = <0x0 0x100>; enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; capacity-dmips-mhz = <1024>; clocks = <&kryocc 1>; operating-points-v2 = <&cluster1_opp>; #cooling-cells = <2>; next-level-cache = <&L2_1>; L2_1: l2-cache { compatible = "cache"; cache-level = <2>; }; }; CPU3: cpu@101 { device_type = "cpu"; compatible = "qcom,kryo"; reg = <0x0 0x101>; enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; capacity-dmips-mhz = <1024>; clocks = <&kryocc 1>; operating-points-v2 = <&cluster1_opp>; #cooling-cells = <2>; next-level-cache = <&L2_1>; }; cpu-map { cluster0 { core0 { cpu = <&CPU0>; }; core1 { cpu = <&CPU1>; }; }; cluster1 { core0 { cpu = <&CPU2>; }; core1 { cpu = <&CPU3>; }; }; }; idle-states { entry-method = "psci"; CPU_SLEEP_0: cpu-sleep-0 { compatible = "arm,idle-state"; idle-state-name = "standalone-power-collapse"; arm,psci-suspend-param = <0x00000004>; entry-latency-us = <130>; exit-latency-us = <80>; min-residency-us = <300>; }; }; }; cluster0_opp: opp_table0 { compatible = "operating-points-v2-kryo-cpu"; nvmem-cells = <&speedbin_efuse>; opp-shared; /* Nominal fmax for now */ opp-307200000 { opp-hz = /bits/ 64 <307200000>; opp-supported-hw = <0x77>; clock-latency-ns = <200000>; }; opp-422400000 { opp-hz = /bits/ 64 <422400000>; opp-supported-hw = <0x77>; clock-latency-ns = <200000>; }; opp-480000000 { opp-hz = /bits/ 64 <480000000>; opp-supported-hw = <0x77>; clock-latency-ns = <200000>; }; opp-556800000 { opp-hz = /bits/ 64 <556800000>; opp-supported-hw = <0x77>; clock-latency-ns = <200000>; }; opp-652800000 { opp-hz = /bits/ 64 <652800000>; opp-supported-hw = <0x77>; clock-latency-ns = <200000>; }; opp-729600000 { opp-hz = /bits/ 64 <729600000>; opp-supported-hw = <0x77>; clock-latency-ns = <200000>; }; opp-844800000 { opp-hz = /bits/ 64 <844800000>; opp-supported-hw = <0x77>; clock-latency-ns = <200000>; }; opp-960000000 { opp-hz = /bits/ 64 <960000000>; opp-supported-hw = <0x77>; clock-latency-ns = <200000>; }; opp-1036800000 { opp-hz = /bits/ 64 <1036800000>; opp-supported-hw = <0x77>; clock-latency-ns = <200000>; }; opp-1113600000 { opp-hz = /bits/ 64 <1113600000>; opp-supported-hw = <0x77>; clock-latency-ns = <200000>; }; opp-1190400000 { opp-hz = /bits/ 64 <1190400000>; opp-supported-hw = <0x77>; clock-latency-ns = <200000>; }; opp-1228800000 { opp-hz = /bits/ 64 <1228800000>; opp-supported-hw = <0x77>; clock-latency-ns = <200000>; }; opp-1324800000 { opp-hz = /bits/ 64 <1324800000>; opp-supported-hw = <0x77>; clock-latency-ns = <200000>; }; opp-1401600000 { opp-hz = /bits/ 64 <1401600000>; opp-supported-hw = <0x77>; clock-latency-ns = <200000>; }; opp-1478400000 { opp-hz = /bits/ 64 <1478400000>; opp-supported-hw = <0x77>; clock-latency-ns = <200000>; }; opp-1593600000 { opp-hz = /bits/ 64 <1593600000>; opp-supported-hw = <0x77>; clock-latency-ns = <200000>; }; }; cluster1_opp: opp_table1 { compatible = "operating-points-v2-kryo-cpu"; nvmem-cells = <&speedbin_efuse>; opp-shared; /* Nominal fmax for now */ opp-307200000 { opp-hz = /bits/ 64 <307200000>; opp-supported-hw = <0x77>; clock-latency-ns = <200000>; }; opp-403200000 { opp-hz = /bits/ 64 <403200000>; opp-supported-hw = <0x77>; clock-latency-ns = <200000>; }; opp-480000000 { opp-hz = /bits/ 64 <480000000>; opp-supported-hw = <0x77>; clock-latency-ns = <200000>; }; opp-556800000 { opp-hz = /bits/ 64 <556800000>; opp-supported-hw = <0x77>; clock-latency-ns = <200000>; }; opp-652800000 { opp-hz = /bits/ 64 <652800000>; opp-supported-hw = <0x77>; clock-latency-ns = <200000>; }; opp-729600000 { opp-hz = /bits/ 64 <729600000>; opp-supported-hw = <0x77>; clock-latency-ns = <200000>; }; opp-806400000 { opp-hz = /bits/ 64 <806400000>; opp-supported-hw = <0x77>; clock-latency-ns = <200000>; }; opp-883200000 { opp-hz = /bits/ 64 <883200000>; opp-supported-hw = <0x77>; clock-latency-ns = <200000>; }; opp-940800000 { opp-hz = /bits/ 64 <940800000>; opp-supported-hw = <0x77>; clock-latency-ns = <200000>; }; opp-1036800000 { opp-hz = /bits/ 64 <1036800000>; opp-supported-hw = <0x77>; clock-latency-ns = <200000>; }; opp-1113600000 { opp-hz = /bits/ 64 <1113600000>; opp-supported-hw = <0x77>; clock-latency-ns = <200000>; }; opp-1190400000 { opp-hz = /bits/ 64 <1190400000>; opp-supported-hw = <0x77>; clock-latency-ns = <200000>; }; opp-1248000000 { opp-hz = /bits/ 64 <1248000000>; opp-supported-hw = <0x77>; clock-latency-ns = <200000>; }; opp-1324800000 { opp-hz = /bits/ 64 <1324800000>; opp-supported-hw = <0x77>; clock-latency-ns = <200000>; }; opp-1401600000 { opp-hz = /bits/ 64 <1401600000>; opp-supported-hw = <0x77>; clock-latency-ns = <200000>; }; opp-1478400000 { opp-hz = /bits/ 64 <1478400000>; opp-supported-hw = <0x77>; clock-latency-ns = <200000>; }; opp-1555200000 { opp-hz = /bits/ 64 <1555200000>; opp-supported-hw = <0x77>; clock-latency-ns = <200000>; }; opp-1632000000 { opp-hz = /bits/ 64 <1632000000>; opp-supported-hw = <0x77>; clock-latency-ns = <200000>; }; opp-1708800000 { opp-hz = /bits/ 64 <1708800000>; opp-supported-hw = <0x77>; clock-latency-ns = <200000>; }; opp-1785600000 { opp-hz = /bits/ 64 <1785600000>; opp-supported-hw = <0x77>; clock-latency-ns = <200000>; }; opp-1824000000 { opp-hz = /bits/ 64 <1824000000>; opp-supported-hw = <0x77>; clock-latency-ns = <200000>; }; opp-1920000000 { opp-hz = /bits/ 64 <1920000000>; opp-supported-hw = <0x77>; clock-latency-ns = <200000>; }; opp-1996800000 { opp-hz = /bits/ 64 <1996800000>; opp-supported-hw = <0x77>; clock-latency-ns = <200000>; }; opp-2073600000 { opp-hz = /bits/ 64 <2073600000>; opp-supported-hw = <0x77>; clock-latency-ns = <200000>; }; opp-2150400000 { opp-hz = /bits/ 64 <2150400000>; opp-supported-hw = <0x77>; clock-latency-ns = <200000>; }; }; firmware { scm { compatible = "qcom,scm-msm8996"; qcom,dload-mode = <&tcsr 0x13000>; }; }; tcsr_mutex: hwlock { compatible = "qcom,tcsr-mutex"; syscon = <&tcsr_mutex_regs 0 0x1000>; #hwlock-cells = <1>; }; memory { device_type = "memory"; /* We expect the bootloader to fill in the reg */ reg = <0 0 0 0>; }; psci { compatible = "arm,psci-1.0"; method = "smc"; }; reserved-memory { #address-cells = <2>; #size-cells = <2>; ranges; mba_region: mba@91500000 { reg = <0x0 0x91500000 0x0 0x200000>; no-map; }; slpi_region: slpi@90b00000 { reg = <0x0 0x90b00000 0x0 0xa00000>; no-map; }; venus_region: venus@90400000 { reg = <0x0 0x90400000 0x0 0x700000>; no-map; }; adsp_region: adsp@8ea00000 { reg = <0x0 0x8ea00000 0x0 0x1a00000>; no-map; }; mpss_region: mpss@88800000 { reg = <0x0 0x88800000 0x0 0x6200000>; no-map; }; smem_mem: smem-mem@86000000 { reg = <0x0 0x86000000 0x0 0x200000>; no-map; }; memory@85800000 { reg = <0x0 0x85800000 0x0 0x800000>; no-map; }; memory@86200000 { reg = <0x0 0x86200000 0x0 0x2600000>; no-map; }; rmtfs@86700000 { compatible = "qcom,rmtfs-mem"; size = <0x0 0x200000>; alloc-ranges = <0x0 0xa0000000 0x0 0x2000000>; no-map; qcom,client-id = <1>; qcom,vmid = <15>; }; zap_shader_region: gpu@8f200000 { compatible = "shared-dma-pool"; reg = <0x0 0x90b00000 0x0 0xa00000>; no-map; }; }; rpm-glink { compatible = "qcom,glink-rpm"; interrupts = ; qcom,rpm-msg-ram = <&rpm_msg_ram>; mboxes = <&apcs_glb 0>; rpm_requests: rpm-requests { compatible = "qcom,rpm-msm8996"; qcom,glink-channels = "rpm_requests"; rpmcc: qcom,rpmcc { compatible = "qcom,rpmcc-msm8996"; #clock-cells = <1>; }; rpmpd: power-controller { compatible = "qcom,msm8996-rpmpd"; #power-domain-cells = <1>; operating-points-v2 = <&rpmpd_opp_table>; rpmpd_opp_table: opp-table { compatible = "operating-points-v2"; rpmpd_opp1: opp1 { opp-level = <1>; }; rpmpd_opp2: opp2 { opp-level = <2>; }; rpmpd_opp3: opp3 { opp-level = <3>; }; rpmpd_opp4: opp4 { opp-level = <4>; }; rpmpd_opp5: opp5 { opp-level = <5>; }; rpmpd_opp6: opp6 { opp-level = <6>; }; }; }; }; }; smem { compatible = "qcom,smem"; memory-region = <&smem_mem>; hwlocks = <&tcsr_mutex 3>; }; smp2p-adsp { compatible = "qcom,smp2p"; qcom,smem = <443>, <429>; interrupts = <0 158 IRQ_TYPE_EDGE_RISING>; mboxes = <&apcs_glb 10>; qcom,local-pid = <0>; qcom,remote-pid = <2>; smp2p_adsp_out: master-kernel { qcom,entry-name = "master-kernel"; #qcom,smem-state-cells = <1>; }; smp2p_adsp_in: slave-kernel { qcom,entry-name = "slave-kernel"; interrupt-controller; #interrupt-cells = <2>; }; }; smp2p-modem { compatible = "qcom,smp2p"; qcom,smem = <435>, <428>; interrupts = ; mboxes = <&apcs_glb 14>; qcom,local-pid = <0>; qcom,remote-pid = <1>; modem_smp2p_out: master-kernel { qcom,entry-name = "master-kernel"; #qcom,smem-state-cells = <1>; }; modem_smp2p_in: slave-kernel { qcom,entry-name = "slave-kernel"; interrupt-controller; #interrupt-cells = <2>; }; }; smp2p-slpi { compatible = "qcom,smp2p"; qcom,smem = <481>, <430>; interrupts = ; mboxes = <&apcs_glb 26>; qcom,local-pid = <0>; qcom,remote-pid = <3>; smp2p_slpi_in: slave-kernel { qcom,entry-name = "slave-kernel"; interrupt-controller; #interrupt-cells = <2>; }; smp2p_slpi_out: master-kernel { qcom,entry-name = "master-kernel"; #qcom,smem-state-cells = <1>; }; }; soc: soc { #address-cells = <1>; #size-cells = <1>; ranges = <0 0 0 0xffffffff>; compatible = "simple-bus"; pcie_phy: phy@34000 { compatible = "qcom,msm8996-qmp-pcie-phy"; reg = <0x00034000 0x488>; #clock-cells = <1>; #address-cells = <1>; #size-cells = <1>; ranges; clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, <&gcc GCC_PCIE_PHY_CFG_AHB_CLK>, <&gcc GCC_PCIE_CLKREF_CLK>; clock-names = "aux", "cfg_ahb", "ref"; resets = <&gcc GCC_PCIE_PHY_BCR>, <&gcc GCC_PCIE_PHY_COM_BCR>, <&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>; reset-names = "phy", "common", "cfg"; status = "disabled"; pciephy_0: lane@35000 { reg = <0x00035000 0x130>, <0x00035200 0x200>, <0x00035400 0x1dc>; #phy-cells = <0>; clock-output-names = "pcie_0_pipe_clk_src"; clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; clock-names = "pipe0"; resets = <&gcc GCC_PCIE_0_PHY_BCR>; reset-names = "lane0"; }; pciephy_1: lane@36000 { reg = <0x00036000 0x130>, <0x00036200 0x200>, <0x00036400 0x1dc>; #phy-cells = <0>; clock-output-names = "pcie_1_pipe_clk_src"; clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; clock-names = "pipe1"; resets = <&gcc GCC_PCIE_1_PHY_BCR>; reset-names = "lane1"; }; pciephy_2: lane@37000 { reg = <0x00037000 0x130>, <0x00037200 0x200>, <0x00037400 0x1dc>; #phy-cells = <0>; clock-output-names = "pcie_2_pipe_clk_src"; clocks = <&gcc GCC_PCIE_2_PIPE_CLK>; clock-names = "pipe2"; resets = <&gcc GCC_PCIE_2_PHY_BCR>; reset-names = "lane2"; }; }; rpm_msg_ram: memory@68000 { compatible = "qcom,rpm-msg-ram"; reg = <0x00068000 0x6000>; }; qfprom@74000 { compatible = "qcom,qfprom"; reg = <0x00074000 0x8ff>; #address-cells = <1>; #size-cells = <1>; qusb2p_hstx_trim: hstx_trim@24e { reg = <0x24e 0x2>; bits = <5 4>; }; qusb2s_hstx_trim: hstx_trim@24f { reg = <0x24f 0x1>; bits = <1 4>; }; speedbin_efuse: speedbin@133 { reg = <0x133 0x1>; bits = <5 3>; }; }; rng: rng@83000 { compatible = "qcom,prng-ee"; reg = <0x00083000 0x1000>; clocks = <&gcc GCC_PRNG_AHB_CLK>; clock-names = "core"; }; gcc: clock-controller@300000 { compatible = "qcom,gcc-msm8996"; #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; reg = <0x00300000 0x90000>; clocks = <&rpmcc RPM_SMD_LN_BB_CLK>; clock-names = "cxo2"; }; tsens0: thermal-sensor@4a9000 { compatible = "qcom,msm8996-tsens", "qcom,tsens-v2"; reg = <0x004a9000 0x1000>, /* TM */ <0x004a8000 0x1000>; /* SROT */ #qcom,sensors = <13>; interrupts = , ; interrupt-names = "uplow", "critical"; #thermal-sensor-cells = <1>; }; tsens1: thermal-sensor@4ad000 { compatible = "qcom,msm8996-tsens", "qcom,tsens-v2"; reg = <0x004ad000 0x1000>, /* TM */ <0x004ac000 0x1000>; /* SROT */ #qcom,sensors = <8>; interrupts = , ; interrupt-names = "uplow", "critical"; #thermal-sensor-cells = <1>; }; tcsr_mutex_regs: syscon@740000 { compatible = "syscon"; reg = <0x00740000 0x40000>; }; tcsr: syscon@7a0000 { compatible = "qcom,tcsr-msm8996", "syscon"; reg = <0x007a0000 0x18000>; }; mmcc: clock-controller@8c0000 { compatible = "qcom,mmcc-msm8996"; #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; reg = <0x008c0000 0x40000>; assigned-clocks = <&mmcc MMPLL9_PLL>, <&mmcc MMPLL1_PLL>, <&mmcc MMPLL3_PLL>, <&mmcc MMPLL4_PLL>, <&mmcc MMPLL5_PLL>; assigned-clock-rates = <624000000>, <810000000>, <980000000>, <960000000>, <825000000>; }; mdss: mdss@900000 { compatible = "qcom,mdss"; reg = <0x00900000 0x1000>, <0x009b0000 0x1040>, <0x009b8000 0x1040>; reg-names = "mdss_phys", "vbif_phys", "vbif_nrt_phys"; power-domains = <&mmcc MDSS_GDSC>; interrupts = ; interrupt-controller; #interrupt-cells = <1>; clocks = <&mmcc MDSS_AHB_CLK>; clock-names = "iface"; #address-cells = <1>; #size-cells = <1>; ranges; status = "disabled"; mdp: mdp@901000 { compatible = "qcom,mdp5"; reg = <0x00901000 0x90000>; reg-names = "mdp_phys"; interrupt-parent = <&mdss>; interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mmcc MDSS_AHB_CLK>, <&mmcc MDSS_AXI_CLK>, <&mmcc MDSS_MDP_CLK>, <&mmcc SMMU_MDP_AXI_CLK>, <&mmcc MDSS_VSYNC_CLK>; clock-names = "iface", "bus", "core", "iommu", "vsync"; iommus = <&mdp_smmu 0>; assigned-clocks = <&mmcc MDSS_MDP_CLK>, <&mmcc MDSS_VSYNC_CLK>; assigned-clock-rates = <300000000>, <19200000>; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; mdp5_intf3_out: endpoint { remote-endpoint = <&hdmi_in>; }; }; port@1 { reg = <1>; mdp5_intf1_out: endpoint { remote-endpoint = <&dsi0_in>; }; }; }; }; dsi0: dsi@994000 { compatible = "qcom,mdss-dsi-ctrl"; reg = <0x00994000 0x400>; reg-names = "dsi_ctrl"; interrupt-parent = <&mdss>; interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mmcc MDSS_MDP_CLK>, <&mmcc MDSS_BYTE0_CLK>, <&mmcc MDSS_AHB_CLK>, <&mmcc MDSS_AXI_CLK>, <&mmcc MMSS_MISC_AHB_CLK>, <&mmcc MDSS_PCLK0_CLK>, <&mmcc MDSS_ESC0_CLK>; clock-names = "mdp_core", "byte", "iface", "bus", "core_mmss", "pixel", "core"; phys = <&dsi0_phy>; phy-names = "dsi"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; dsi0_in: endpoint { remote-endpoint = <&mdp5_intf1_out>; }; }; port@1 { reg = <1>; dsi0_out: endpoint { }; }; }; }; dsi0_phy: dsi-phy@994400 { compatible = "qcom,dsi-phy-14nm"; reg = <0x00994400 0x100>, <0x00994500 0x300>, <0x00994800 0x188>; reg-names = "dsi_phy", "dsi_phy_lane", "dsi_pll"; #clock-cells = <1>; #phy-cells = <0>; clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>; clock-names = "iface", "ref"; status = "disabled"; }; hdmi: hdmi-tx@9a0000 { compatible = "qcom,hdmi-tx-8996"; reg = <0x009a0000 0x50c>, <0x00070000 0x6158>, <0x009e0000 0xfff>; reg-names = "core_physical", "qfprom_physical", "hdcp_physical"; interrupt-parent = <&mdss>; interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mmcc MDSS_MDP_CLK>, <&mmcc MDSS_AHB_CLK>, <&mmcc MDSS_HDMI_CLK>, <&mmcc MDSS_HDMI_AHB_CLK>, <&mmcc MDSS_EXTPCLK_CLK>; clock-names = "mdp_core", "iface", "core", "alt_iface", "extp"; phys = <&hdmi_phy>; phy-names = "hdmi_phy"; #sound-dai-cells = <1>; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; hdmi_in: endpoint { remote-endpoint = <&mdp5_intf3_out>; }; }; }; }; hdmi_phy: hdmi-phy@9a0600 { #phy-cells = <0>; compatible = "qcom,hdmi-phy-8996"; reg = <0x009a0600 0x1c4>, <0x009a0a00 0x124>, <0x009a0c00 0x124>, <0x009a0e00 0x124>, <0x009a1000 0x124>, <0x009a1200 0x0c8>; reg-names = "hdmi_pll", "hdmi_tx_l0", "hdmi_tx_l1", "hdmi_tx_l2", "hdmi_tx_l3", "hdmi_phy"; clocks = <&mmcc MDSS_AHB_CLK>, <&gcc GCC_HDMI_CLKREF_CLK>; clock-names = "iface", "ref"; }; }; gpu: gpu@b00000 { compatible = "qcom,adreno-530.2", "qcom,adreno"; #stream-id-cells = <16>; reg = <0x00b00000 0x3f000>; reg-names = "kgsl_3d0_reg_memory"; interrupts = <0 300 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mmcc GPU_GX_GFX3D_CLK>, <&mmcc GPU_AHB_CLK>, <&mmcc GPU_GX_RBBMTIMER_CLK>, <&gcc GCC_BIMC_GFX_CLK>, <&gcc GCC_MMSS_BIMC_GFX_CLK>; clock-names = "core", "iface", "rbbmtimer", "mem", "mem_iface"; power-domains = <&mmcc GPU_GX_GDSC>; iommus = <&adreno_smmu 0>; nvmem-cells = <&speedbin_efuse>; nvmem-cell-names = "speed_bin"; qcom,gpu-quirk-two-pass-use-wfi; qcom,gpu-quirk-fault-detect-mask; operating-points-v2 = <&gpu_opp_table>; status = "disabled"; gpu_opp_table: opp-table { compatible ="operating-points-v2"; /* * 624Mhz and 560Mhz are only available on speed * bin (1 << 0). All the rest are available on * all bins of the hardware */ opp-624000000 { opp-hz = /bits/ 64 <624000000>; opp-supported-hw = <0x01>; }; opp-560000000 { opp-hz = /bits/ 64 <560000000>; opp-supported-hw = <0x01>; }; opp-510000000 { opp-hz = /bits/ 64 <510000000>; opp-supported-hw = <0xFF>; }; opp-401800000 { opp-hz = /bits/ 64 <401800000>; opp-supported-hw = <0xFF>; }; opp-315000000 { opp-hz = /bits/ 64 <315000000>; opp-supported-hw = <0xFF>; }; opp-214000000 { opp-hz = /bits/ 64 <214000000>; opp-supported-hw = <0xFF>; }; opp-133000000 { opp-hz = /bits/ 64 <133000000>; opp-supported-hw = <0xFF>; }; }; zap-shader { memory-region = <&zap_shader_region>; }; }; tlmm: pinctrl@1010000 { compatible = "qcom,msm8996-pinctrl"; reg = <0x01010000 0x300000>; interrupts = ; gpio-controller; gpio-ranges = <&tlmm 0 0 150>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; blsp1_spi1_default: blsp1-spi1-default { spi { pins = "gpio0", "gpio1", "gpio3"; function = "blsp_spi1"; drive-strength = <12>; bias-disable; }; cs { pins = "gpio2"; function = "gpio"; drive-strength = <16>; bias-disable; output-high; }; }; blsp1_spi1_sleep: blsp1-spi1-sleep { pins = "gpio0", "gpio1", "gpio2", "gpio3"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; blsp2_uart2_2pins_default: blsp2-uart1-2pins { pins = "gpio4", "gpio5"; function = "blsp_uart8"; drive-strength = <16>; bias-disable; }; blsp2_uart2_2pins_sleep: blsp2-uart1-2pins-sleep { pins = "gpio4", "gpio5"; function = "gpio"; drive-strength = <2>; bias-disable; }; blsp2_i2c2_default: blsp2-i2c2 { pins = "gpio6", "gpio7"; function = "blsp_i2c8"; drive-strength = <16>; bias-disable; }; blsp2_i2c2_sleep: blsp2-i2c2-sleep { pins = "gpio6", "gpio7"; function = "gpio"; drive-strength = <2>; bias-disable; }; cci0_default: cci0-default { pins = "gpio17", "gpio18"; function = "cci_i2c"; drive-strength = <16>; bias-disable; }; camera0_state_on: camera_rear_default: camera-rear-default { mclk0 { pins = "gpio13"; function = "cam_mclk"; drive-strength = <16>; bias-disable; }; rst { pins = "gpio25"; function = "gpio"; drive-strength = <16>; bias-disable; }; pwdn { pins = "gpio26"; function = "gpio"; drive-strength = <16>; bias-disable; }; }; cci1_default: cci1-default { pins = "gpio19", "gpio20"; function = "cci_i2c"; drive-strength = <16>; bias-disable; }; camera1_state_on: camera_board_default: camera-board-default { mclk1 { pins = "gpio14"; function = "cam_mclk"; drive-strength = <16>; bias-disable; }; pwdn { pins = "gpio98"; function = "gpio"; drive-strength = <16>; bias-disable; }; rst { pins = "gpio104"; function = "gpio"; drive-strength = <16>; bias-disable; }; }; camera2_state_on: camera_front_default: camera-front-default { mclk2 { pins = "gpio15"; function = "cam_mclk"; drive-strength = <16>; bias-disable; }; rst { pins = "gpio23"; function = "gpio"; drive-strength = <16>; bias-disable; }; pwdn { pins = "gpio133"; function = "gpio"; drive-strength = <16>; bias-disable; }; }; pcie0_state_on: pcie0-state-on { perst { pins = "gpio35"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; clkreq { pins = "gpio36"; function = "pci_e0"; drive-strength = <2>; bias-pull-up; }; wake { pins = "gpio37"; function = "gpio"; drive-strength = <2>; bias-pull-up; }; }; pcie0_state_off: pcie0-state-off { perst { pins = "gpio35"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; clkreq { pins = "gpio36"; function = "gpio"; drive-strength = <2>; bias-disable; }; wake { pins = "gpio37"; function = "gpio"; drive-strength = <2>; bias-disable; }; }; blsp1_i2c3_default: blsp1-i2c2-default { pins = "gpio47", "gpio48"; function = "blsp_i2c3"; drive-strength = <16>; bias-disable = <0>; }; blsp1_i2c3_sleep: blsp1-i2c2-sleep { pins = "gpio47", "gpio48"; function = "gpio"; drive-strength = <2>; bias-disable = <0>; }; blsp2_uart3_4pins_default: blsp2-uart2-4pins { pins = "gpio49", "gpio50", "gpio51", "gpio52"; function = "blsp_uart9"; drive-strength = <16>; bias-disable; }; blsp2_uart3_4pins_sleep: blsp2-uart2-4pins-sleep { pins = "gpio49", "gpio50", "gpio51", "gpio52"; function = "blsp_uart9"; drive-strength = <2>; bias-disable; }; wcd_intr_default: wcd-intr-default{ pins = "gpio54"; function = "gpio"; drive-strength = <2>; bias-pull-down; input-enable; }; blsp2_i2c1_default: blsp2-i2c1 { pins = "gpio55", "gpio56"; function = "blsp_i2c7"; drive-strength = <16>; bias-disable; }; blsp2_i2c1_sleep: blsp2-i2c0-sleep { pins = "gpio55", "gpio56"; function = "gpio"; drive-strength = <2>; bias-disable; }; blsp2_i2c5_default: blsp2-i2c5 { pins = "gpio60", "gpio61"; function = "blsp_i2c11"; drive-strength = <2>; bias-disable; }; /* Sleep state for BLSP2_I2C5 is missing.. */ cdc_reset_active: cdc-reset-active { pins = "gpio64"; function = "gpio"; drive-strength = <16>; bias-pull-down; output-high; }; cdc_reset_sleep: cdc-reset-sleep { pins = "gpio64"; function = "gpio"; drive-strength = <16>; bias-disable; output-low; }; blsp2_spi6_default: blsp2-spi5-default { spi { pins = "gpio85", "gpio86", "gpio88"; function = "blsp_spi12"; drive-strength = <12>; bias-disable; }; cs { pins = "gpio87"; function = "gpio"; drive-strength = <16>; bias-disable; output-high; }; }; blsp2_spi6_sleep: blsp2-spi5-sleep { pins = "gpio85", "gpio86", "gpio87", "gpio88"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; blsp2_i2c6_default: blsp2-i2c6 { pins = "gpio87", "gpio88"; function = "blsp_i2c12"; drive-strength = <16>; bias-disable; }; blsp2_i2c6_sleep: blsp2-i2c6-sleep { pins = "gpio87", "gpio88"; function = "gpio"; drive-strength = <2>; bias-disable; }; pcie1_state_on: pcie1-state-on { perst { pins = "gpio130"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; clkreq { pins = "gpio131"; function = "pci_e1"; drive-strength = <2>; bias-pull-up; }; wake { pins = "gpio132"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; }; pcie1_state_off: pcie1-state-off { /* Perst is missing? */ clkreq { pins = "gpio131"; function = "gpio"; drive-strength = <2>; bias-disable; }; wake { pins = "gpio132"; function = "gpio"; drive-strength = <2>; bias-disable; }; }; pcie2_state_on: pcie2-state-on { perst { pins = "gpio114"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; clkreq { pins = "gpio115"; function = "pci_e2"; drive-strength = <2>; bias-pull-up; }; wake { pins = "gpio116"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; }; pcie2_state_off: pcie2-state-off { /* Perst is missing? */ clkreq { pins = "gpio115"; function = "gpio"; drive-strength = <2>; bias-disable; }; wake { pins = "gpio116"; function = "gpio"; drive-strength = <2>; bias-disable; }; }; sdc1_state_on: sdc1-state-on { clk { pins = "sdc1_clk"; bias-disable; drive-strength = <16>; }; cmd { pins = "sdc1_cmd"; bias-pull-up; drive-strength = <10>; }; data { pins = "sdc1_data"; bias-pull-up; drive-strength = <10>; }; rclk { pins = "sdc1_rclk"; bias-pull-down; }; }; sdc1_state_off: sdc1-state-off { clk { pins = "sdc1_clk"; bias-disable; drive-strength = <2>; }; cmd { pins = "sdc1_cmd"; bias-pull-up; drive-strength = <2>; }; data { pins = "sdc1_data"; bias-pull-up; drive-strength = <2>; }; rclk { pins = "sdc1_rclk"; bias-pull-down; }; }; sdc2_state_on: sdc2-clk-on { clk { pins = "sdc2_clk"; bias-disable; drive-strength = <16>; }; cmd { pins = "sdc2_cmd"; bias-pull-up; drive-strength = <10>; }; data { pins = "sdc2_data"; bias-pull-up; drive-strength = <10>; }; }; sdc2_state_off: sdc2-clk-off { clk { pins = "sdc2_clk"; bias-disable; drive-strength = <2>; }; cmd { pins = "sdc2_cmd"; bias-pull-up; drive-strength = <2>; }; data { pins = "sdc2_data"; bias-pull-up; drive-strength = <2>; }; }; }; spmi_bus: qcom,spmi@400f000 { compatible = "qcom,spmi-pmic-arb"; reg = <0x0400f000 0x1000>, <0x04400000 0x800000>, <0x04c00000 0x800000>, <0x05800000 0x200000>, <0x0400a000 0x002100>; reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; interrupt-names = "periph_irq"; interrupts = ; qcom,ee = <0>; qcom,channel = <0>; #address-cells = <2>; #size-cells = <0>; interrupt-controller; #interrupt-cells = <4>; }; agnoc@0 { power-domains = <&gcc AGGRE0_NOC_GDSC>; compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges; pcie0: pcie@600000 { compatible = "qcom,pcie-msm8996", "snps,dw-pcie"; status = "disabled"; power-domains = <&gcc PCIE0_GDSC>; bus-range = <0x00 0xff>; num-lanes = <1>; reg = <0x00600000 0x2000>, <0x0c000000 0xf1d>, <0x0c000f20 0xa8>, <0x0c100000 0x100000>; reg-names = "parf", "dbi", "elbi","config"; phys = <&pciephy_0>; phy-names = "pciephy"; #address-cells = <3>; #size-cells = <2>; ranges = <0x01000000 0x0 0x0c200000 0x0c200000 0x0 0x100000>, <0x02000000 0x0 0x0c300000 0x0c300000 0x0 0xd00000>; device_type = "pci"; interrupts = ; interrupt-names = "msi"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ <0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ <0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ <0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ pinctrl-names = "default", "sleep"; pinctrl-0 = <&pcie0_state_on>; pinctrl-1 = <&pcie0_state_off>; linux,pci-domain = <0>; clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, <&gcc GCC_PCIE_0_AUX_CLK>, <&gcc GCC_PCIE_0_CFG_AHB_CLK>, <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, <&gcc GCC_PCIE_0_SLV_AXI_CLK>; clock-names = "pipe", "aux", "cfg", "bus_master", "bus_slave"; }; pcie1: pcie@608000 { compatible = "qcom,pcie-msm8996", "snps,dw-pcie"; power-domains = <&gcc PCIE1_GDSC>; bus-range = <0x00 0xff>; num-lanes = <1>; status = "disabled"; reg = <0x00608000 0x2000>, <0x0d000000 0xf1d>, <0x0d000f20 0xa8>, <0x0d100000 0x100000>; reg-names = "parf", "dbi", "elbi","config"; phys = <&pciephy_1>; phy-names = "pciephy"; #address-cells = <3>; #size-cells = <2>; ranges = <0x01000000 0x0 0x0d200000 0x0d200000 0x0 0x100000>, <0x02000000 0x0 0x0d300000 0x0d300000 0x0 0xd00000>; device_type = "pci"; interrupts = ; interrupt-names = "msi"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 272 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ <0 0 0 2 &intc 0 273 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ <0 0 0 3 &intc 0 274 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ <0 0 0 4 &intc 0 275 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ pinctrl-names = "default", "sleep"; pinctrl-0 = <&pcie1_state_on>; pinctrl-1 = <&pcie1_state_off>; linux,pci-domain = <1>; clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, <&gcc GCC_PCIE_1_AUX_CLK>, <&gcc GCC_PCIE_1_CFG_AHB_CLK>, <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, <&gcc GCC_PCIE_1_SLV_AXI_CLK>; clock-names = "pipe", "aux", "cfg", "bus_master", "bus_slave"; }; pcie2: pcie@610000 { compatible = "qcom,pcie-msm8996", "snps,dw-pcie"; power-domains = <&gcc PCIE2_GDSC>; bus-range = <0x00 0xff>; num-lanes = <1>; status = "disabled"; reg = <0x00610000 0x2000>, <0x0e000000 0xf1d>, <0x0e000f20 0xa8>, <0x0e100000 0x100000>; reg-names = "parf", "dbi", "elbi","config"; phys = <&pciephy_2>; phy-names = "pciephy"; #address-cells = <3>; #size-cells = <2>; ranges = <0x01000000 0x0 0x0e200000 0x0e200000 0x0 0x100000>, <0x02000000 0x0 0x0e300000 0x0e300000 0x0 0x1d00000>; device_type = "pci"; interrupts = ; interrupt-names = "msi"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ <0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ <0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ <0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ pinctrl-names = "default", "sleep"; pinctrl-0 = <&pcie2_state_on>; pinctrl-1 = <&pcie2_state_off>; linux,pci-domain = <2>; clocks = <&gcc GCC_PCIE_2_PIPE_CLK>, <&gcc GCC_PCIE_2_AUX_CLK>, <&gcc GCC_PCIE_2_CFG_AHB_CLK>, <&gcc GCC_PCIE_2_MSTR_AXI_CLK>, <&gcc GCC_PCIE_2_SLV_AXI_CLK>; clock-names = "pipe", "aux", "cfg", "bus_master", "bus_slave"; }; }; ufshc: ufshc@624000 { compatible = "qcom,ufshc"; reg = <0x00624000 0x2500>; interrupts = ; phys = <&ufsphy_lane>; phy-names = "ufsphy"; power-domains = <&gcc UFS_GDSC>; clock-names = "core_clk_src", "core_clk", "bus_clk", "bus_aggr_clk", "iface_clk", "core_clk_unipro_src", "core_clk_unipro", "core_clk_ice", "ref_clk", "tx_lane0_sync_clk", "rx_lane0_sync_clk"; clocks = <&gcc UFS_AXI_CLK_SRC>, <&gcc GCC_UFS_AXI_CLK>, <&gcc GCC_SYS_NOC_UFS_AXI_CLK>, <&gcc GCC_AGGRE2_UFS_AXI_CLK>, <&gcc GCC_UFS_AHB_CLK>, <&gcc UFS_ICE_CORE_CLK_SRC>, <&gcc GCC_UFS_UNIPRO_CORE_CLK>, <&gcc GCC_UFS_ICE_CORE_CLK>, <&rpmcc RPM_SMD_LN_BB_CLK>, <&gcc GCC_UFS_TX_SYMBOL_0_CLK>, <&gcc GCC_UFS_RX_SYMBOL_0_CLK>; freq-table-hz = <100000000 200000000>, <0 0>, <0 0>, <0 0>, <0 0>, <150000000 300000000>, <0 0>, <0 0>, <0 0>, <0 0>, <0 0>; lanes-per-direction = <1>; #reset-cells = <1>; status = "disabled"; ufs_variant { compatible = "qcom,ufs_variant"; }; }; ufsphy: phy@627000 { compatible = "qcom,msm8996-qmp-ufs-phy"; reg = <0x00627000 0x1c4>; #address-cells = <1>; #size-cells = <1>; ranges; clocks = <&gcc GCC_UFS_CLKREF_CLK>; clock-names = "ref"; resets = <&ufshc 0>; reset-names = "ufsphy"; status = "disabled"; ufsphy_lane: lanes@627400 { reg = <0x627400 0x12c>, <0x627600 0x200>, <0x627c00 0x1b4>; #phy-cells = <0>; }; }; camss: camss@a00000 { compatible = "qcom,msm8996-camss"; reg = <0x00a34000 0x1000>, <0x00a00030 0x4>, <0x00a35000 0x1000>, <0x00a00038 0x4>, <0x00a36000 0x1000>, <0x00a00040 0x4>, <0x00a30000 0x100>, <0x00a30400 0x100>, <0x00a30800 0x100>, <0x00a30c00 0x100>, <0x00a31000 0x500>, <0x00a00020 0x10>, <0x00a10000 0x1000>, <0x00a14000 0x1000>; reg-names = "csiphy0", "csiphy0_clk_mux", "csiphy1", "csiphy1_clk_mux", "csiphy2", "csiphy2_clk_mux", "csid0", "csid1", "csid2", "csid3", "ispif", "csi_clk_mux", "vfe0", "vfe1"; interrupts = , , , , , , , , , ; interrupt-names = "csiphy0", "csiphy1", "csiphy2", "csid0", "csid1", "csid2", "csid3", "ispif", "vfe0", "vfe1"; power-domains = <&mmcc VFE0_GDSC>, <&mmcc VFE1_GDSC>; clocks = <&mmcc CAMSS_TOP_AHB_CLK>, <&mmcc CAMSS_ISPIF_AHB_CLK>, <&mmcc CAMSS_CSI0PHYTIMER_CLK>, <&mmcc CAMSS_CSI1PHYTIMER_CLK>, <&mmcc CAMSS_CSI2PHYTIMER_CLK>, <&mmcc CAMSS_CSI0_AHB_CLK>, <&mmcc CAMSS_CSI0_CLK>, <&mmcc CAMSS_CSI0PHY_CLK>, <&mmcc CAMSS_CSI0PIX_CLK>, <&mmcc CAMSS_CSI0RDI_CLK>, <&mmcc CAMSS_CSI1_AHB_CLK>, <&mmcc CAMSS_CSI1_CLK>, <&mmcc CAMSS_CSI1PHY_CLK>, <&mmcc CAMSS_CSI1PIX_CLK>, <&mmcc CAMSS_CSI1RDI_CLK>, <&mmcc CAMSS_CSI2_AHB_CLK>, <&mmcc CAMSS_CSI2_CLK>, <&mmcc CAMSS_CSI2PHY_CLK>, <&mmcc CAMSS_CSI2PIX_CLK>, <&mmcc CAMSS_CSI2RDI_CLK>, <&mmcc CAMSS_CSI3_AHB_CLK>, <&mmcc CAMSS_CSI3_CLK>, <&mmcc CAMSS_CSI3PHY_CLK>, <&mmcc CAMSS_CSI3PIX_CLK>, <&mmcc CAMSS_CSI3RDI_CLK>, <&mmcc CAMSS_AHB_CLK>, <&mmcc CAMSS_VFE0_CLK>, <&mmcc CAMSS_CSI_VFE0_CLK>, <&mmcc CAMSS_VFE0_AHB_CLK>, <&mmcc CAMSS_VFE0_STREAM_CLK>, <&mmcc CAMSS_VFE1_CLK>, <&mmcc CAMSS_CSI_VFE1_CLK>, <&mmcc CAMSS_VFE1_AHB_CLK>, <&mmcc CAMSS_VFE1_STREAM_CLK>, <&mmcc CAMSS_VFE_AHB_CLK>, <&mmcc CAMSS_VFE_AXI_CLK>; clock-names = "top_ahb", "ispif_ahb", "csiphy0_timer", "csiphy1_timer", "csiphy2_timer", "csi0_ahb", "csi0", "csi0_phy", "csi0_pix", "csi0_rdi", "csi1_ahb", "csi1", "csi1_phy", "csi1_pix", "csi1_rdi", "csi2_ahb", "csi2", "csi2_phy", "csi2_pix", "csi2_rdi", "csi3_ahb", "csi3", "csi3_phy", "csi3_pix", "csi3_rdi", "ahb", "vfe0", "csi_vfe0", "vfe0_ahb", "vfe0_stream", "vfe1", "csi_vfe1", "vfe1_ahb", "vfe1_stream", "vfe_ahb", "vfe_axi"; iommus = <&vfe_smmu 0>, <&vfe_smmu 1>, <&vfe_smmu 2>, <&vfe_smmu 3>; status = "disabled"; ports { #address-cells = <1>; #size-cells = <0>; }; }; cci: cci@a0c000 { compatible = "qcom,msm8996-cci"; #address-cells = <1>; #size-cells = <0>; reg = <0xa0c000 0x1000>; interrupts = ; power-domains = <&mmcc CAMSS_GDSC>; clocks = <&mmcc CAMSS_TOP_AHB_CLK>, <&mmcc CAMSS_CCI_AHB_CLK>, <&mmcc CAMSS_CCI_CLK>, <&mmcc CAMSS_AHB_CLK>; clock-names = "camss_top_ahb", "cci_ahb", "cci", "camss_ahb"; assigned-clocks = <&mmcc CAMSS_CCI_AHB_CLK>, <&mmcc CAMSS_CCI_CLK>; assigned-clock-rates = <80000000>, <37500000>; pinctrl-names = "default"; pinctrl-0 = <&cci0_default &cci1_default>; status = "disabled"; cci_i2c0: i2c-bus@0 { reg = <0>; clock-frequency = <400000>; #address-cells = <1>; #size-cells = <0>; }; cci_i2c1: i2c-bus@1 { reg = <1>; clock-frequency = <400000>; #address-cells = <1>; #size-cells = <0>; }; }; adreno_smmu: iommu@b40000 { compatible = "qcom,msm8996-smmu-v2", "qcom,adreno-smmu", "qcom,smmu-v2"; reg = <0x00b40000 0x10000>; #global-interrupts = <1>; interrupts = , , ; #iommu-cells = <1>; clocks = <&mmcc GPU_AHB_CLK>, <&gcc GCC_MMSS_BIMC_GFX_CLK>; clock-names = "iface", "bus"; power-domains = <&mmcc GPU_GDSC>; }; venus: video-codec@c00000 { compatible = "qcom,msm8996-venus"; reg = <0x00c00000 0xff000>; interrupts = ; power-domains = <&mmcc VENUS_GDSC>; clocks = <&mmcc VIDEO_CORE_CLK>, <&mmcc VIDEO_AHB_CLK>, <&mmcc VIDEO_AXI_CLK>, <&mmcc VIDEO_MAXI_CLK>; clock-names = "core", "iface", "bus", "mbus"; iommus = <&venus_smmu 0x00>, <&venus_smmu 0x01>, <&venus_smmu 0x0a>, <&venus_smmu 0x07>, <&venus_smmu 0x0e>, <&venus_smmu 0x0f>, <&venus_smmu 0x08>, <&venus_smmu 0x09>, <&venus_smmu 0x0b>, <&venus_smmu 0x0c>, <&venus_smmu 0x0d>, <&venus_smmu 0x10>, <&venus_smmu 0x11>, <&venus_smmu 0x21>, <&venus_smmu 0x28>, <&venus_smmu 0x29>, <&venus_smmu 0x2b>, <&venus_smmu 0x2c>, <&venus_smmu 0x2d>, <&venus_smmu 0x31>; memory-region = <&venus_region>; status = "disabled"; video-decoder { compatible = "venus-decoder"; clocks = <&mmcc VIDEO_SUBCORE0_CLK>; clock-names = "core"; power-domains = <&mmcc VENUS_CORE0_GDSC>; }; video-encoder { compatible = "venus-encoder"; clocks = <&mmcc VIDEO_SUBCORE1_CLK>; clock-names = "core"; power-domains = <&mmcc VENUS_CORE1_GDSC>; }; }; mdp_smmu: iommu@d00000 { compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; reg = <0x00d00000 0x10000>; #global-interrupts = <1>; interrupts = , , ; #iommu-cells = <1>; clocks = <&mmcc SMMU_MDP_AHB_CLK>, <&mmcc SMMU_MDP_AXI_CLK>; clock-names = "iface", "bus"; power-domains = <&mmcc MDSS_GDSC>; }; venus_smmu: iommu@d40000 { compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; reg = <0x00d40000 0x20000>; #global-interrupts = <1>; interrupts = , , , , , , , ; power-domains = <&mmcc MMAGIC_VIDEO_GDSC>; clocks = <&mmcc SMMU_VIDEO_AHB_CLK>, <&mmcc SMMU_VIDEO_AXI_CLK>; clock-names = "iface", "bus"; #iommu-cells = <1>; status = "okay"; }; vfe_smmu: iommu@da0000 { compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; reg = <0x00da0000 0x10000>; #global-interrupts = <1>; interrupts = , , ; power-domains = <&mmcc MMAGIC_CAMSS_GDSC>; clocks = <&mmcc SMMU_VFE_AHB_CLK>, <&mmcc SMMU_VFE_AXI_CLK>; clock-names = "iface", "bus"; #iommu-cells = <1>; }; lpass_q6_smmu: iommu@1600000 { compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; reg = <0x01600000 0x20000>; #iommu-cells = <1>; power-domains = <&gcc HLOS1_VOTE_LPASS_CORE_GDSC>; #global-interrupts = <1>; interrupts = , , , , , , , , , , , , ; clocks = <&gcc GCC_HLOS1_VOTE_LPASS_CORE_SMMU_CLK>, <&gcc GCC_HLOS1_VOTE_LPASS_ADSP_SMMU_CLK>; clock-names = "iface", "bus"; }; stm@3002000 { compatible = "arm,coresight-stm", "arm,primecell"; reg = <0x3002000 0x1000>, <0x8280000 0x180000>; reg-names = "stm-base", "stm-stimulus-base"; clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; out-ports { port { stm_out: endpoint { remote-endpoint = <&funnel0_in>; }; }; }; }; tpiu@3020000 { compatible = "arm,coresight-tpiu", "arm,primecell"; reg = <0x3020000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; in-ports { port { tpiu_in: endpoint { remote-endpoint = <&replicator_out1>; }; }; }; }; funnel@3021000 { compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0x3021000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; in-ports { #address-cells = <1>; #size-cells = <0>; port@7 { reg = <7>; funnel0_in: endpoint { remote-endpoint = <&stm_out>; }; }; }; out-ports { port { funnel0_out: endpoint { remote-endpoint = <&merge_funnel_in0>; }; }; }; }; funnel@3022000 { compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0x3022000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; in-ports { #address-cells = <1>; #size-cells = <0>; port@6 { reg = <6>; funnel1_in: endpoint { remote-endpoint = <&apss_merge_funnel_out>; }; }; }; out-ports { port { funnel1_out: endpoint { remote-endpoint = <&merge_funnel_in1>; }; }; }; }; funnel@3023000 { compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0x3023000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; out-ports { port { funnel2_out: endpoint { remote-endpoint = <&merge_funnel_in2>; }; }; }; }; funnel@3025000 { compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0x3025000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; in-ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; merge_funnel_in0: endpoint { remote-endpoint = <&funnel0_out>; }; }; port@1 { reg = <1>; merge_funnel_in1: endpoint { remote-endpoint = <&funnel1_out>; }; }; port@2 { reg = <2>; merge_funnel_in2: endpoint { remote-endpoint = <&funnel2_out>; }; }; }; out-ports { port { merge_funnel_out: endpoint { remote-endpoint = <&etf_in>; }; }; }; }; replicator@3026000 { compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; reg = <0x3026000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; in-ports { port { replicator_in: endpoint { remote-endpoint = <&etf_out>; }; }; }; out-ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; replicator_out0: endpoint { remote-endpoint = <&etr_in>; }; }; port@1 { reg = <1>; replicator_out1: endpoint { remote-endpoint = <&tpiu_in>; }; }; }; }; etf@3027000 { compatible = "arm,coresight-tmc", "arm,primecell"; reg = <0x3027000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; in-ports { port { etf_in: endpoint { remote-endpoint = <&merge_funnel_out>; }; }; }; out-ports { port { etf_out: endpoint { remote-endpoint = <&replicator_in>; }; }; }; }; etr@3028000 { compatible = "arm,coresight-tmc", "arm,primecell"; reg = <0x3028000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; arm,scatter-gather; in-ports { port { etr_in: endpoint { remote-endpoint = <&replicator_out0>; }; }; }; }; debug@3810000 { compatible = "arm,coresight-cpu-debug", "arm,primecell"; reg = <0x3810000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>; clock-names = "apb_pclk"; cpu = <&CPU0>; }; etm@3840000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0x3840000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; cpu = <&CPU0>; out-ports { port { etm0_out: endpoint { remote-endpoint = <&apss_funnel0_in0>; }; }; }; }; debug@3910000 { compatible = "arm,coresight-cpu-debug", "arm,primecell"; reg = <0x3910000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>; clock-names = "apb_pclk"; cpu = <&CPU1>; }; etm@3940000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0x3940000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; cpu = <&CPU1>; out-ports { port { etm1_out: endpoint { remote-endpoint = <&apss_funnel0_in1>; }; }; }; }; funnel@39b0000 { /* APSS Funnel 0 */ compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0x39b0000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; in-ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; apss_funnel0_in0: endpoint { remote-endpoint = <&etm0_out>; }; }; port@1 { reg = <1>; apss_funnel0_in1: endpoint { remote-endpoint = <&etm1_out>; }; }; }; out-ports { port { apss_funnel0_out: endpoint { remote-endpoint = <&apss_merge_funnel_in0>; }; }; }; }; debug@3a10000 { compatible = "arm,coresight-cpu-debug", "arm,primecell"; reg = <0x3a10000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>; clock-names = "apb_pclk"; cpu = <&CPU2>; }; etm@3a40000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0x3a40000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; cpu = <&CPU2>; out-ports { port { etm2_out: endpoint { remote-endpoint = <&apss_funnel1_in0>; }; }; }; }; debug@3b10000 { compatible = "arm,coresight-cpu-debug", "arm,primecell"; reg = <0x3b10000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>; clock-names = "apb_pclk"; cpu = <&CPU3>; }; etm@3b40000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0x3b40000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; cpu = <&CPU3>; out-ports { port { etm3_out: endpoint { remote-endpoint = <&apss_funnel1_in1>; }; }; }; }; funnel@3bb0000 { /* APSS Funnel 1 */ compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0x3bb0000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; in-ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; apss_funnel1_in0: endpoint { remote-endpoint = <&etm2_out>; }; }; port@1 { reg = <1>; apss_funnel1_in1: endpoint { remote-endpoint = <&etm3_out>; }; }; }; out-ports { port { apss_funnel1_out: endpoint { remote-endpoint = <&apss_merge_funnel_in1>; }; }; }; }; funnel@3bc0000 { compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0x3bc0000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; in-ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; apss_merge_funnel_in0: endpoint { remote-endpoint = <&apss_funnel0_out>; }; }; port@1 { reg = <1>; apss_merge_funnel_in1: endpoint { remote-endpoint = <&apss_funnel1_out>; }; }; }; out-ports { port { apss_merge_funnel_out: endpoint { remote-endpoint = <&funnel1_in>; }; }; }; }; kryocc: clock-controller@6400000 { compatible = "qcom,msm8996-apcc"; reg = <0x06400000 0x90000>; clock-names = "xo"; clocks = <&xo_board>; #clock-cells = <1>; }; usb3: usb@6af8800 { compatible = "qcom,msm8996-dwc3", "qcom,dwc3"; reg = <0x06af8800 0x400>; #address-cells = <1>; #size-cells = <1>; ranges; interrupts = , ; interrupt-names = "hs_phy_irq", "ss_phy_irq"; clocks = <&gcc GCC_SYS_NOC_USB3_AXI_CLK>, <&gcc GCC_USB30_MASTER_CLK>, <&gcc GCC_AGGRE2_USB3_AXI_CLK>, <&gcc GCC_USB30_MOCK_UTMI_CLK>, <&gcc GCC_USB30_SLEEP_CLK>, <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>; assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, <&gcc GCC_USB30_MASTER_CLK>; assigned-clock-rates = <19200000>, <120000000>; power-domains = <&gcc USB30_GDSC>; status = "disabled"; dwc3@6a00000 { compatible = "snps,dwc3"; reg = <0x06a00000 0xcc00>; interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>; phys = <&hsusb_phy1>, <&ssusb_phy_0>; phy-names = "usb2-phy", "usb3-phy"; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; }; }; usb3phy: phy@7410000 { compatible = "qcom,msm8996-qmp-usb3-phy"; reg = <0x07410000 0x1c4>; #clock-cells = <1>; #address-cells = <1>; #size-cells = <1>; ranges; clocks = <&gcc GCC_USB3_PHY_AUX_CLK>, <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, <&gcc GCC_USB3_CLKREF_CLK>; clock-names = "aux", "cfg_ahb", "ref"; resets = <&gcc GCC_USB3_PHY_BCR>, <&gcc GCC_USB3PHY_PHY_BCR>; reset-names = "phy", "common"; status = "disabled"; ssusb_phy_0: lane@7410200 { reg = <0x07410200 0x200>, <0x07410400 0x130>, <0x07410600 0x1a8>; #phy-cells = <0>; clock-output-names = "usb3_phy_pipe_clk_src"; clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>; clock-names = "pipe0"; }; }; hsusb_phy1: phy@7411000 { compatible = "qcom,msm8996-qusb2-phy"; reg = <0x07411000 0x180>; #phy-cells = <0>; clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, <&gcc GCC_RX1_USB2_CLKREF_CLK>; clock-names = "cfg_ahb", "ref"; resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; nvmem-cells = <&qusb2p_hstx_trim>; status = "disabled"; }; hsusb_phy2: phy@7412000 { compatible = "qcom,msm8996-qusb2-phy"; reg = <0x07412000 0x180>; #phy-cells = <0>; clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, <&gcc GCC_RX2_USB2_CLKREF_CLK>; clock-names = "cfg_ahb", "ref"; resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; nvmem-cells = <&qusb2s_hstx_trim>; status = "disabled"; }; sdhc1: sdhci@7464900 { compatible = "qcom,sdhci-msm-v4"; reg = <0x07464900 0x11c>, <0x07464000 0x800>; reg-names = "hc_mem", "core_mem"; interrupts = , ; interrupt-names = "hc_irq", "pwr_irq"; clock-names = "iface", "core", "xo"; clocks = <&gcc GCC_SDCC1_AHB_CLK>, <&gcc GCC_SDCC1_APPS_CLK>, <&xo_board>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&sdc1_state_on>; pinctrl-1 = <&sdc1_state_off>; bus-width = <8>; non-removable; status = "disabled"; }; sdhc2: sdhci@74a4900 { compatible = "qcom,sdhci-msm-v4"; reg = <0x074a4900 0x314>, <0x074a4000 0x800>; reg-names = "hc_mem", "core_mem"; interrupts = , ; interrupt-names = "hc_irq", "pwr_irq"; clock-names = "iface", "core", "xo"; clocks = <&gcc GCC_SDCC2_AHB_CLK>, <&gcc GCC_SDCC2_APPS_CLK>, <&xo_board>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&sdc2_state_on>; pinctrl-1 = <&sdc2_state_off>; bus-width = <4>; status = "disabled"; }; blsp1_dma: dma@7544000 { compatible = "qcom,bam-v1.7.0"; reg = <0x07544000 0x2b000>; interrupts = ; clocks = <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "bam_clk"; qcom,controlled-remotely; #dma-cells = <1>; qcom,ee = <0>; }; blsp1_uart2: serial@7570000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x07570000 0x1000>; interrupts = ; clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; dmas = <&blsp1_dma 2>, <&blsp1_dma 3>; dma-names = "tx", "rx"; status = "disabled"; }; blsp1_spi1: spi@7575000 { compatible = "qcom,spi-qup-v2.2.1"; reg = <0x07575000 0x600>; interrupts = ; clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&blsp1_spi1_default>; pinctrl-1 = <&blsp1_spi1_sleep>; dmas = <&blsp1_dma 12>, <&blsp1_dma 13>; dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; blsp1_i2c3: i2c@7577000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x07577000 0x1000>; interrupts = ; clocks = <&gcc GCC_BLSP1_AHB_CLK>, <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>; clock-names = "iface", "core"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&blsp1_i2c3_default>; pinctrl-1 = <&blsp1_i2c3_sleep>; dmas = <&blsp1_dma 16>, <&blsp1_dma 17>; dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; blsp2_dma: dma@7584000 { compatible = "qcom,bam-v1.7.0"; reg = <0x07584000 0x2b000>; interrupts = ; clocks = <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "bam_clk"; qcom,controlled-remotely; #dma-cells = <1>; qcom,ee = <0>; }; blsp2_uart2: serial@75b0000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x075b0000 0x1000>; interrupts = ; clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; status = "disabled"; }; blsp2_uart3: serial@75b1000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x075b1000 0x1000>; interrupts = ; clocks = <&gcc GCC_BLSP2_UART3_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; status = "disabled"; }; blsp2_i2c1: i2c@75b5000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x075b5000 0x1000>; interrupts = ; clocks = <&gcc GCC_BLSP2_AHB_CLK>, <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>; clock-names = "iface", "core"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&blsp2_i2c1_default>; pinctrl-1 = <&blsp2_i2c1_sleep>; dmas = <&blsp2_dma 12>, <&blsp2_dma 13>; dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; blsp2_i2c2: i2c@75b6000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x075b6000 0x1000>; interrupts = ; clocks = <&gcc GCC_BLSP2_AHB_CLK>, <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>; clock-names = "iface", "core"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&blsp2_i2c2_default>; pinctrl-1 = <&blsp2_i2c2_sleep>; dmas = <&blsp2_dma 14>, <&blsp2_dma 15>; dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; blsp2_i2c5: i2c@75b9000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x75b9000 0x1000>; interrupts = ; clocks = <&gcc GCC_BLSP2_AHB_CLK>, <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>; clock-names = "iface", "core"; pinctrl-names = "default"; pinctrl-0 = <&blsp2_i2c5_default>; dmas = <&blsp2_dma 20>, <&blsp2_dma 21>; dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; blsp2_i2c6: i2c@75ba000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x75ba000 0x1000>; interrupts = ; clocks = <&gcc GCC_BLSP2_AHB_CLK>, <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>; clock-names = "iface", "core"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&blsp2_i2c6_default>; pinctrl-1 = <&blsp2_i2c6_sleep>; dmas = <&blsp2_dma 22>, <&blsp2_dma 23>; dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; blsp2_spi6: spi@75ba000{ compatible = "qcom,spi-qup-v2.2.1"; reg = <0x075ba000 0x600>; interrupts = ; clocks = <&gcc GCC_BLSP2_QUP6_SPI_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&blsp2_spi6_default>; pinctrl-1 = <&blsp2_spi6_sleep>; dmas = <&blsp2_dma 22>, <&blsp2_dma 23>; dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; usb2: usb@76f8800 { compatible = "qcom,msm8996-dwc3", "qcom,dwc3"; reg = <0x076f8800 0x400>; #address-cells = <1>; #size-cells = <1>; ranges; clocks = <&gcc GCC_PERIPH_NOC_USB20_AHB_CLK>, <&gcc GCC_USB20_MASTER_CLK>, <&gcc GCC_USB20_MOCK_UTMI_CLK>, <&gcc GCC_USB20_SLEEP_CLK>, <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>; assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>, <&gcc GCC_USB20_MASTER_CLK>; assigned-clock-rates = <19200000>, <60000000>; power-domains = <&gcc USB30_GDSC>; qcom,select-utmi-as-pipe-clk; status = "disabled"; dwc3@7600000 { compatible = "snps,dwc3"; reg = <0x07600000 0xcc00>; interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>; phys = <&hsusb_phy2>; phy-names = "usb2-phy"; maximum-speed = "high-speed"; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; }; }; slimbam: dma-controller@9184000 { compatible = "qcom,bam-v1.7.0"; qcom,controlled-remotely; reg = <0x09184000 0x32000>; num-channels = <31>; interrupts = <0 164 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; qcom,ee = <1>; qcom,num-ees = <2>; }; slim_msm: slim@91c0000 { compatible = "qcom,slim-ngd-v1.5.0"; reg = <0x091c0000 0x2C000>; reg-names = "ctrl"; interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>; dmas = <&slimbam 3>, <&slimbam 4>, <&slimbam 5>, <&slimbam 6>; dma-names = "rx", "tx", "tx2", "rx2"; #address-cells = <1>; #size-cells = <0>; ngd@1 { reg = <1>; #address-cells = <1>; #size-cells = <1>; tasha_ifd: tas-ifd { compatible = "slim217,1a0"; reg = <0 0>; }; wcd9335: codec@1{ pinctrl-0 = <&cdc_reset_active &wcd_intr_default>; pinctrl-names = "default"; compatible = "slim217,1a0"; reg = <1 0>; interrupt-parent = <&tlmm>; interrupts = <54 IRQ_TYPE_LEVEL_HIGH>, <53 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "intr1", "intr2"; interrupt-controller; #interrupt-cells = <1>; reset-gpios = <&tlmm 64 0>; slim-ifc-dev = <&tasha_ifd>; #sound-dai-cells = <1>; }; }; }; adsp_pil: remoteproc@9300000 { compatible = "qcom,msm8996-adsp-pil"; reg = <0x09300000 0x80000>; interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; clocks = <&xo_board>; clock-names = "xo"; memory-region = <&adsp_region>; qcom,smem-states = <&smp2p_adsp_out 0>; qcom,smem-state-names = "stop"; power-domains = <&rpmpd MSM8996_VDDCX>; power-domain-names = "cx"; status = "disabled"; smd-edge { interrupts = ; label = "lpass"; mboxes = <&apcs_glb 8>; qcom,smd-edge = <1>; qcom,remote-pid = <2>; #address-cells = <1>; #size-cells = <0>; apr { power-domains = <&gcc HLOS1_VOTE_LPASS_ADSP_GDSC>; compatible = "qcom,apr-v2"; qcom,smd-channels = "apr_audio_svc"; qcom,apr-domain = ; #address-cells = <1>; #size-cells = <0>; q6core { reg = ; compatible = "qcom,q6core"; }; q6afe: q6afe { compatible = "qcom,q6afe"; reg = ; q6afedai: dais { compatible = "qcom,q6afe-dais"; #address-cells = <1>; #size-cells = <0>; #sound-dai-cells = <1>; hdmi@1 { reg = <1>; }; }; }; q6asm: q6asm { compatible = "qcom,q6asm"; reg = ; q6asmdai: dais { compatible = "qcom,q6asm-dais"; #address-cells = <1>; #size-cells = <0>; #sound-dai-cells = <1>; iommus = <&lpass_q6_smmu 1>; }; }; q6adm: q6adm { compatible = "qcom,q6adm"; reg = ; q6routing: routing { compatible = "qcom,q6adm-routing"; #sound-dai-cells = <0>; }; }; }; }; }; apcs_glb: mailbox@9820000 { compatible = "qcom,msm8996-apcs-hmss-global"; reg = <0x09820000 0x1000>; #mbox-cells = <1>; }; timer@9840000 { #address-cells = <1>; #size-cells = <1>; ranges; compatible = "arm,armv7-timer-mem"; reg = <0x09840000 0x1000>; clock-frequency = <19200000>; frame@9850000 { frame-number = <0>; interrupts = , ; reg = <0x09850000 0x1000>, <0x09860000 0x1000>; }; frame@9870000 { frame-number = <1>; interrupts = ; reg = <0x09870000 0x1000>; status = "disabled"; }; frame@9880000 { frame-number = <2>; interrupts = ; reg = <0x09880000 0x1000>; status = "disabled"; }; frame@9890000 { frame-number = <3>; interrupts = ; reg = <0x09890000 0x1000>; status = "disabled"; }; frame@98a0000 { frame-number = <4>; interrupts = ; reg = <0x098a0000 0x1000>; status = "disabled"; }; frame@98b0000 { frame-number = <5>; interrupts = ; reg = <0x098b0000 0x1000>; status = "disabled"; }; frame@98c0000 { frame-number = <6>; interrupts = ; reg = <0x098c0000 0x1000>; status = "disabled"; }; }; saw3: syscon@9a10000 { compatible = "syscon"; reg = <0x09a10000 0x1000>; }; intc: interrupt-controller@9bc0000 { compatible = "qcom,msm8996-gic-v3", "arm,gic-v3"; #interrupt-cells = <3>; interrupt-controller; #redistributor-regions = <1>; redistributor-stride = <0x0 0x40000>; reg = <0x09bc0000 0x10000>, <0x09c00000 0x100000>; interrupts = ; }; }; sound: sound { }; thermal-zones { cpu0-thermal { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsens0 3>; trips { cpu0_alert0: trip-point0 { temperature = <75000>; hysteresis = <2000>; type = "passive"; }; cpu0_crit: cpu_crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; }; }; }; cpu1-thermal { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsens0 5>; trips { cpu1_alert0: trip-point0 { temperature = <75000>; hysteresis = <2000>; type = "passive"; }; cpu1_crit: cpu_crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; }; }; }; cpu2-thermal { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsens0 8>; trips { cpu2_alert0: trip-point0 { temperature = <75000>; hysteresis = <2000>; type = "passive"; }; cpu2_crit: cpu_crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; }; }; }; cpu3-thermal { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsens0 10>; trips { cpu3_alert0: trip-point0 { temperature = <75000>; hysteresis = <2000>; type = "passive"; }; cpu3_crit: cpu_crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; }; }; }; gpu-thermal-top { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsens1 6>; trips { gpu1_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; }; }; }; gpu-thermal-bottom { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsens1 7>; trips { gpu2_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; }; }; }; m4m-thermal { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsens0 1>; trips { m4m_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; }; }; }; l3-or-venus-thermal { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsens0 2>; trips { l3_or_venus_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; }; }; }; cluster0-l2-thermal { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsens0 7>; trips { cluster0_l2_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; }; }; }; cluster1-l2-thermal { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsens0 12>; trips { cluster1_l2_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; }; }; }; camera-thermal { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsens1 1>; trips { camera_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; }; }; }; q6-dsp-thermal { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsens1 2>; trips { q6_dsp_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; }; }; }; mem-thermal { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsens1 3>; trips { mem_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; }; }; }; modemtx-thermal { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsens1 4>; trips { modemtx_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; }; }; }; }; timer { compatible = "arm,armv8-timer"; interrupts = , , , ; }; };