// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) /* * Device Tree Source for the RZ/V2M SoC * * Copyright (C) 2022 Renesas Electronics Corp. */ #include #include / { compatible = "renesas,r9a09g011"; #address-cells = <2>; #size-cells = <2>; /* clock can be either from exclk or crystal oscillator (XIN/XOUT) */ extal_clk: extal { compatible = "fixed-clock"; #clock-cells = <0>; /* This value must be overridden by the board */ clock-frequency = <0>; }; cpus { #address-cells = <1>; #size-cells = <0>; cpu-map { cluster0 { core0 { cpu = <&cpu0>; }; }; }; cpu0: cpu@0 { compatible = "arm,cortex-a53"; reg = <0>; device_type = "cpu"; clocks = <&cpg CPG_MOD R9A09G011_CA53_CLK>; }; }; soc: soc { compatible = "simple-bus"; interrupt-parent = <&gic>; #address-cells = <2>; #size-cells = <2>; ranges; gic: interrupt-controller@82000000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; #address-cells = <0>; interrupt-controller; reg = <0x0 0x82010000 0 0x1000>, <0x0 0x82020000 0 0x20000>, <0x0 0x82040000 0 0x20000>, <0x0 0x82060000 0 0x20000>; interrupts = ; clocks = <&cpg CPG_MOD R9A09G011_GIC_CLK>; clock-names = "clk"; }; avb: ethernet@a3300000 { compatible = "renesas,etheravb-r9a09g011","renesas,etheravb-rzv2m"; reg = <0 0xa3300000 0 0x800>; interrupts = , /* ch0: Rx0 BE */ , /* ch1: Rx1 NC */ , , , , , , , , , , , , , , , , , /* ch18: Tx0 BE */ , /* ch19: Tx1 NC */ , , , /* DiA */ , /* DiB */ , /* Line1_A */ , /* Line1_B */ , /* Line2_A */ , /* Line2_B */ ; /* Line3 MAC */ interrupt-names = "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", "ch8", "ch9", "ch10", "ch11", "ch12", "ch13", "ch14", "ch15", "ch16", "ch17", "ch18", "ch19", "ch20", "ch21", "dia", "dib", "err_a", "err_b", "mgmt_a", "mgmt_b", "line3"; clocks = <&cpg CPG_MOD R9A09G011_ETH0_CLK_AXI>, <&cpg CPG_MOD R9A09G011_ETH0_CLK_CHI>, <&cpg CPG_MOD R9A09G011_ETH0_GPTP_EXT>; clock-names = "axi", "chi", "gptp"; resets = <&cpg R9A09G011_ETH0_RST_HW_N>; power-domains = <&cpg>; #address-cells = <1>; #size-cells = <0>; status = "disable"; }; cpg: clock-controller@a3500000 { compatible = "renesas,r9a09g011-cpg"; reg = <0 0xa3500000 0 0x1000>; clocks = <&extal_clk>; clock-names = "extal"; #clock-cells = <2>; #reset-cells = <1>; #power-domain-cells = <0>; }; uart0: serial@a4040000 { compatible = "renesas,r9a09g011-uart", "renesas,em-uart"; reg = <0 0xa4040000 0 0x80>; interrupts = ; clocks = <&cpg CPG_MOD R9A09G011_URT0_CLK>, <&cpg CPG_MOD R9A09G011_URT_PCLK>; clock-names = "sclk", "pclk"; status = "disabled"; }; }; timer { compatible = "arm,armv8-timer"; interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; }; };