// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2020 Aditya Prayoga */ /* * The Kobol Helios64 is a board designed to operate as a NAS and optionally * ships with an enclosing that can host five 2.5" hard disks. * * See https://wiki.kobol.io/helios64/intro/ for further details. */ /dts-v1/; #include "rk3399.dtsi" #include "rk3399-opp.dtsi" / { model = "Kobol Helios64"; compatible = "kobol,helios64", "rockchip,rk3399"; avdd_1v8_s0: avdd-1v8-s0 { compatible = "regulator-fixed"; regulator-name = "avdd_1v8_s0"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; vin-supply = <&vcc3v3_sys_s3>; }; clkin_gmac: external-gmac-clock { compatible = "fixed-clock"; clock-frequency = <125000000>; clock-output-names = "clkin_gmac"; #clock-cells = <0>; }; leds { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&sys_grn_led_on &sys_red_led_on>; led-0 { label = "helios64:green:status"; gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; default-state = "on"; }; led-1 { label = "helios64:red:fault"; gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; default-state = "keep"; }; }; vcc1v8_sys_s0: vcc1v8-sys-s0 { compatible = "regulator-fixed"; regulator-name = "vcc1v8_sys_s0"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; vin-supply = <&vcc1v8_sys_s3>; }; vcc3v0_sd: vcc3v0-sd { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>; regulator-name = "vcc3v0_sd"; regulator-boot-on; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc0_pwr_h>; vin-supply = <&vcc3v3_sys_s3>; }; vcc3v3_sys_s3: vcc_lan: vcc3v3-sys-s3 { compatible = "regulator-fixed"; regulator-name = "vcc3v3_sys_s3"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; vin-supply = <&vcc5v0_sys>; regulator-state-mem { regulator-on-in-suspend; }; }; vcc5v0_sys: vcc5v0-sys { compatible = "regulator-fixed"; regulator-name = "vcc5v0_sys"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; vin-supply = <&vcc12v_dcin_bkup>; regulator-state-mem { regulator-on-in-suspend; }; }; vcc12v_dcin: vcc12v-dcin { compatible = "regulator-fixed"; regulator-name = "vcc12v_dcin"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <12000000>; regulator-max-microvolt = <12000000>; }; vcc12v_dcin_bkup: vcc12v-dcin-bkup { compatible = "regulator-fixed"; regulator-name = "vcc12v_dcin_bkup"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <12000000>; regulator-max-microvolt = <12000000>; vin-supply = <&vcc12v_dcin>; }; }; /* * The system doesn't run stable with cpu freq enabled, so disallow the lower * frequencies until this problem is properly understood and resolved. */ &cluster0_opp { /delete-node/ opp00; /delete-node/ opp01; /delete-node/ opp02; /delete-node/ opp03; /delete-node/ opp04; }; &cluster1_opp { /delete-node/ opp00; /delete-node/ opp01; /delete-node/ opp02; /delete-node/ opp03; /delete-node/ opp04; /delete-node/ opp05; /delete-node/ opp06; }; &cpu_b0 { cpu-supply = <&vdd_cpu_b>; }; &cpu_b1 { cpu-supply = <&vdd_cpu_b>; }; &cpu_l0 { cpu-supply = <&vdd_cpu_l>; }; &cpu_l1 { cpu-supply = <&vdd_cpu_l>; }; &cpu_l2 { cpu-supply = <&vdd_cpu_l>; }; &cpu_l3 { cpu-supply = <&vdd_cpu_l>; }; &emmc_phy { status = "okay"; }; &gmac { assigned-clock-parents = <&clkin_gmac>; assigned-clocks = <&cru SCLK_RMII_SRC>; clock_in_out = "input"; phy-mode = "rgmii"; phy-supply = <&vcc_lan>; pinctrl-names = "default"; pinctrl-0 = <&rgmii_pins &gphy_reset>; rx_delay = <0x20>; tx_delay = <0x28>; snps,reset-active-low; snps,reset-delays-us = <0 10000 50000>; snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; status = "okay"; }; &i2c0 { clock-frequency = <400000>; i2c-scl-rising-time-ns = <168>; i2c-scl-falling-time-ns = <4>; status = "okay"; rk808: pmic@1b { compatible = "rockchip,rk808"; reg = <0x1b>; interrupt-parent = <&gpio0>; interrupts = <10 IRQ_TYPE_LEVEL_LOW>; clock-output-names = "xin32k", "rk808-clkout2"; pinctrl-names = "default"; pinctrl-0 = <&pmic_int_l>; vcc1-supply = <&vcc5v0_sys>; vcc2-supply = <&vcc5v0_sys>; vcc3-supply = <&vcc5v0_sys>; vcc4-supply = <&vcc5v0_sys>; vcc6-supply = <&vcc5v0_sys>; vcc7-supply = <&vcc5v0_sys>; vcc8-supply = <&vcc3v3_sys_s3>; vcc9-supply = <&vcc5v0_sys>; vcc10-supply = <&vcc5v0_sys>; vcc11-supply = <&vcc5v0_sys>; vcc12-supply = <&vcc3v3_sys_s3>; vddio-supply = <&vcc3v0_s3>; wakeup-source; #clock-cells = <1>; regulators { vdd_cpu_l: DCDC_REG2 { regulator-name = "vdd_cpu_l"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <750000>; regulator-max-microvolt = <1350000>; regulator-ramp-delay = <6001>; regulator-state-mem { regulator-off-in-suspend; }; }; vcc1v8_sys_s3: DCDC_REG4 { regulator-name = "vcc1v8_sys_s3"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <1800000>; }; }; vcc_sdio_s0: LDO_REG4 { regulator-name = "vcc_sdio_s0"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3000000>; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <3000000>; }; }; vcc3v0_s3: LDO_REG8 { regulator-name = "vcc3v0_s3"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <3000000>; }; }; }; }; vdd_cpu_b: regulator@40 { compatible = "silergy,syr827"; reg = <0x40>; fcs,suspend-voltage-selector = <1>; regulator-name = "vdd_cpu_b"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <712500>; regulator-max-microvolt = <1500000>; regulator-ramp-delay = <1000>; vin-supply = <&vcc5v0_sys>; regulator-state-mem { regulator-off-in-suspend; }; }; }; &i2c2 { clock-frequency = <400000>; i2c-scl-rising-time-ns = <160>; i2c-scl-falling-time-ns = <30>; status = "okay"; temp@4c { compatible = "national,lm75"; reg = <0x4c>; }; }; &io_domains { audio-supply = <&vcc1v8_sys_s0>; bt656-supply = <&vcc1v8_sys_s0>; gpio1830-supply = <&vcc3v0_s3>; sdmmc-supply = <&vcc_sdio_s0>; status = "okay"; }; &pinctrl { gmac { gphy_reset: gphy-reset { rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_output_low>; }; }; leds { sys_grn_led_on: sys-grn-led-on { rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>; }; sys_red_led_on: sys-red-led-on { rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>; }; }; pmic { pmic_int_l: pmic-int-l { rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; vcc3v0-sd { sdmmc0_pwr_h: sdmmc0-pwr-h { rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; }; }; }; &pmu_io_domains { pmu1830-supply = <&vcc3v0_s3>; status = "okay"; }; &sdhci { bus-width = <8>; mmc-hs200-1_8v; non-removable; vqmmc-supply = <&vcc1v8_sys_s0>; status = "okay"; }; &sdmmc { bus-width = <4>; cap-sd-highspeed; cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; disable-wp; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; vmmc-supply = <&vcc3v0_sd>; vqmmc-supply = <&vcc_sdio_s0>; status = "okay"; }; &uart2 { status = "okay"; };